forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix comment on FILAMENT_RUNOUT_SENSOR

Browse Source
master
Scott Lahteine 8 years ago
parent 48e14d049a
commit a6f6ed352b
22 changed files with 22 additions and 22 deletions
Show Stats Download Patch File Download Diff File

2
Marlin/Configuration.h
Unescape View File

@ -642,7 +642,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/Cartesio/Configuration.h
Unescape View File

@ -642,7 +642,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/Felix/Configuration.h
Unescape View File

@ -625,7 +625,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/Felix/DUAL/Configuration.h
Unescape View File

@ -623,7 +623,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/Hephestos/Configuration.h
Unescape View File

@ -634,7 +634,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/Hephestos_2/Configuration.h
Unescape View File

@ -636,7 +636,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/K8200/Configuration.h
Unescape View File

@ -659,7 +659,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/K8400/Configuration.h
Unescape View File

@ -642,7 +642,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/K8400/Dual-head/Configuration.h
Unescape View File

@ -642,7 +642,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
Unescape View File

@ -642,7 +642,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/RigidBot/Configuration.h
Unescape View File

@ -640,7 +640,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/SCARA/Configuration.h
Unescape View File

@ -650,7 +650,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/TAZ4/Configuration.h
Unescape View File

@ -663,7 +663,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/WITBOX/Configuration.h
Unescape View File

@ -634,7 +634,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/adafruit/ST7565/Configuration.h
Unescape View File

@ -642,7 +642,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/delta/biv2.5/Configuration.h
Unescape View File

@ -732,7 +732,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/delta/generic/Configuration.h
Unescape View File

@ -726,7 +726,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Unescape View File

@ -729,7 +729,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/delta/kossel_pro/Configuration.h
Unescape View File

@ -730,7 +730,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/delta/kossel_xl/Configuration.h
Unescape View File

@ -732,7 +732,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/makibox/Configuration.h
Unescape View File

@ -645,7 +645,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

2
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Unescape View File

@ -636,7 +636,7 @@
//========================= Filament Runout Sensor ========================== //========================= Filament Runout Sensor ==========================
//=========================================================================== //===========================================================================
//#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament //#define FILAMENT_RUNOUT_SENSOR // Uncomment for defining a filament runout sensor such as a mechanical or opto endstop to check the existence of filament
// In RAMPS uses servo pin 2. Can be changed in pins file. For other boards pin definition should be made. // RAMPS-based boards use SERVO3_PIN. For other boards you may need to define FIL_RUNOUT_PIN.
// It is assumed that when logic high = filament available // It is assumed that when logic high = filament available
// when logic low = filament ran out // when logic low = filament ran out
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)

Write Preview
Loading…
Cancel
Save