Merge pull request #5972 from thinkyhead/rc_cooldown_before

Fix preheat menu formatting
master
Scott Lahteine 8 years ago committed by GitHub
commit a9a1971295

@ -105,6 +105,9 @@
#ifndef MSG_PREHEAT_1_ALL
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" All")
#endif
#ifndef MSG_PREHEAT_1_END
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" End")
#endif
#ifndef MSG_PREHEAT_1_BEDONLY
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bed")
#endif
@ -120,6 +123,9 @@
#ifndef MSG_PREHEAT_2_ALL
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" All")
#endif
#ifndef MSG_PREHEAT_2_END
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" End")
#endif
#ifndef MSG_PREHEAT_2_BEDONLY
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed")
#endif
@ -129,9 +135,6 @@
#ifndef MSG_COOLDOWN
#define MSG_COOLDOWN _UxGT("Cooldown")
#endif
#ifndef MSG_HOTEND
#define MSG_HOTEND _UxGT("Hotend")
#endif
#ifndef MSG_SWITCH_PS_ON
#define MSG_SWITCH_PS_ON _UxGT("Switch power on")
#endif

@ -451,7 +451,7 @@ void Stepper::isr() {
#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
if (ENDSTOPS_ENABLED && e_hit) {
if (e_hit && ENDSTOPS_ENABLED) {
endstops.update();
e_hit--;
}

@ -1087,17 +1087,17 @@ void Temperature::init() {
delay(250);
#define TEMP_MIN_ROUTINE(NR) \
minttemp[NR] = HEATER_ ## NR ## _MINTEMP; \
while(analog2temp(minttemp_raw[NR], NR) < HEATER_ ## NR ## _MINTEMP) { \
if (HEATER_ ## NR ## _RAW_LO_TEMP < HEATER_ ## NR ## _RAW_HI_TEMP) \
minttemp[NR] = HEATER_ ##NR## _MINTEMP; \
while(analog2temp(minttemp_raw[NR], NR) < HEATER_ ##NR## _MINTEMP) { \
if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \
minttemp_raw[NR] += OVERSAMPLENR; \
else \
minttemp_raw[NR] -= OVERSAMPLENR; \
}
#define TEMP_MAX_ROUTINE(NR) \
maxttemp[NR] = HEATER_ ## NR ## _MAXTEMP; \
while(analog2temp(maxttemp_raw[NR], NR) > HEATER_ ## NR ## _MAXTEMP) { \
if (HEATER_ ## NR ## _RAW_LO_TEMP < HEATER_ ## NR ## _RAW_HI_TEMP) \
maxttemp[NR] = HEATER_ ##NR## _MAXTEMP; \
while(analog2temp(maxttemp_raw[NR], NR) > HEATER_ ##NR## _MAXTEMP) { \
if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \
maxttemp_raw[NR] -= OVERSAMPLENR; \
else \
maxttemp_raw[NR] += OVERSAMPLENR; \
@ -1256,7 +1256,7 @@ void Temperature::disable_all_heaters() {
#define DISABLE_HEATER(NR) { \
setTargetHotend(0, NR); \
soft_pwm[NR] = 0; \
WRITE_HEATER_ ## NR (LOW); \
WRITE_HEATER_ ##NR (LOW); \
}
#if HAS_TEMP_HOTEND
@ -1477,9 +1477,11 @@ void Temperature::set_current_temp_raw() {
* in OCR0B above (128 or halfway between OVFs).
*
* - Manage PWM to all the heaters and fan
* - Update the raw temperature values
* - Check new temperature values for MIN/MAX errors
* - Prepare or Measure one of the raw ADC sensor values
* - Check new temperature values for MIN/MAX errors (kill on error)
* - Step the babysteps value for each axis towards 0
* - For PINS_DEBUGGING, monitor and report endstop pins
* - For ENDSTOP_INTERRUPTS_FEATURE check endstops if flagged
*/
ISR(TIMER0_COMPB_vect) { Temperature::isr(); }
@ -1535,37 +1537,37 @@ void Temperature::isr() {
*/
if (pwm_count == 0) {
soft_pwm_0 = soft_pwm[0];
WRITE_HEATER_0(soft_pwm_0 > 0 ? 1 : 0);
WRITE_HEATER_0(soft_pwm_0 > 0 ? HIGH : LOW);
#if HOTENDS > 1
soft_pwm_1 = soft_pwm[1];
WRITE_HEATER_1(soft_pwm_1 > 0 ? 1 : 0);
WRITE_HEATER_1(soft_pwm_1 > 0 ? HIGH : LOW);
#if HOTENDS > 2
soft_pwm_2 = soft_pwm[2];
WRITE_HEATER_2(soft_pwm_2 > 0 ? 1 : 0);
WRITE_HEATER_2(soft_pwm_2 > 0 ? HIGH : LOW);
#if HOTENDS > 3
soft_pwm_3 = soft_pwm[3];
WRITE_HEATER_3(soft_pwm_3 > 0 ? 1 : 0);
WRITE_HEATER_3(soft_pwm_3 > 0 ? HIGH : LOW);
#endif
#endif
#endif
#if HAS_HEATER_BED
soft_pwm_BED = soft_pwm_bed;
WRITE_HEATER_BED(soft_pwm_BED > 0 ? 1 : 0);
WRITE_HEATER_BED(soft_pwm_BED > 0 ? HIGH : LOW);
#endif
#if ENABLED(FAN_SOFT_PWM)
#if HAS_FAN0
soft_pwm_fan[0] = fanSpeedSoftPwm[0] >> 1;
WRITE_FAN(soft_pwm_fan[0] > 0 ? 1 : 0);
WRITE_FAN(soft_pwm_fan[0] > 0 ? HIGH : LOW);
#endif
#if HAS_FAN1
soft_pwm_fan[1] = fanSpeedSoftPwm[1] >> 1;
WRITE_FAN1(soft_pwm_fan[1] > 0 ? 1 : 0);
WRITE_FAN1(soft_pwm_fan[1] > 0 ? HIGH : LOW);
#endif
#if HAS_FAN2
soft_pwm_fan[2] = fanSpeedSoftPwm[2] >> 1;
WRITE_FAN2(soft_pwm_fan[2] > 0 ? 1 : 0);
WRITE_FAN2(soft_pwm_fan[2] > 0 ? HIGH : LOW);
#endif
#endif
}
@ -1621,29 +1623,29 @@ void Temperature::isr() {
// Macros for Slow PWM timer logic
#define _SLOW_PWM_ROUTINE(NR, src) \
soft_pwm_ ## NR = src; \
if (soft_pwm_ ## NR > 0) { \
if (state_timer_heater_ ## NR == 0) { \
if (state_heater_ ## NR == 0) state_timer_heater_ ## NR = MIN_STATE_TIME; \
state_heater_ ## NR = 1; \
WRITE_HEATER_ ## NR(1); \
soft_pwm_ ##NR = src; \
if (soft_pwm_ ##NR > 0) { \
if (state_timer_heater_ ##NR == 0) { \
if (state_heater_ ##NR == 0) state_timer_heater_ ##NR = MIN_STATE_TIME; \
state_heater_ ##NR = 1; \
WRITE_HEATER_ ##NR(1); \
} \
} \
else { \
if (state_timer_heater_ ## NR == 0) { \
if (state_heater_ ## NR == 1) state_timer_heater_ ## NR = MIN_STATE_TIME; \
state_heater_ ## NR = 0; \
WRITE_HEATER_ ## NR(0); \
if (state_timer_heater_ ##NR == 0) { \
if (state_heater_ ##NR == 1) state_timer_heater_ ##NR = MIN_STATE_TIME; \
state_heater_ ##NR = 0; \
WRITE_HEATER_ ##NR(0); \
} \
}
#define SLOW_PWM_ROUTINE(n) _SLOW_PWM_ROUTINE(n, soft_pwm[n])
#define PWM_OFF_ROUTINE(NR) \
if (soft_pwm_ ## NR < slow_pwm_count) { \
if (state_timer_heater_ ## NR == 0) { \
if (state_heater_ ## NR == 1) state_timer_heater_ ## NR = MIN_STATE_TIME; \
state_heater_ ## NR = 0; \
WRITE_HEATER_ ## NR (0); \
if (soft_pwm_ ##NR < slow_pwm_count) { \
if (state_timer_heater_ ##NR == 0) { \
if (state_heater_ ##NR == 1) state_timer_heater_ ##NR = MIN_STATE_TIME; \
state_heater_ ##NR = 0; \
WRITE_HEATER_ ##NR (0); \
} \
}
@ -1683,15 +1685,15 @@ void Temperature::isr() {
if (pwm_count == 0) {
#if HAS_FAN0
soft_pwm_fan[0] = fanSpeedSoftPwm[0] >> 1;
WRITE_FAN(soft_pwm_fan[0] > 0 ? 1 : 0);
WRITE_FAN(soft_pwm_fan[0] > 0 ? HIGH : LOW);
#endif
#if HAS_FAN1
soft_pwm_fan[1] = fanSpeedSoftPwm[1] >> 1;
WRITE_FAN1(soft_pwm_fan[1] > 0 ? 1 : 0);
WRITE_FAN1(soft_pwm_fan[1] > 0 ? HIGH : LOW);
#endif
#if HAS_FAN2
soft_pwm_fan[2] = fanSpeedSoftPwm[2] >> 1;
WRITE_FAN2(soft_pwm_fan[2] > 0 ? 1 : 0);
WRITE_FAN2(soft_pwm_fan[2] > 0 ? HIGH : LOW);
#endif
}
#if HAS_FAN0

@ -763,14 +763,16 @@ void kill_screen(const char* lcd_msg) {
*
*/
/**
* Set the home offset based on the current_position
*/
void lcd_set_home_offsets() {
// M428 Command
enqueue_and_echo_commands_P(PSTR("M428"));
lcd_return_to_status();
}
#if DISABLED(NO_WORKSPACE_OFFSETS)
/**
* Set the home offset based on the current_position
*/
void lcd_set_home_offsets() {
// M428 Command
enqueue_and_echo_commands_P(PSTR("M428"));
lcd_return_to_status();
}
#endif
#if ENABLED(BABYSTEPPING)
@ -1106,16 +1108,16 @@ void kill_screen(const char* lcd_msg) {
#if HOTENDS == 1
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0);
MENU_ITEM(function, MSG_PREHEAT_1 MSG_HOTEND, lcd_preheat_m1_e0_only);
MENU_ITEM(function, MSG_PREHEAT_1_END, lcd_preheat_m1_e0_only);
#else
MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only);
#endif
#else
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0);
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_HOTEND " " MSG_E1, lcd_preheat_m1_e0_only);
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E1, lcd_preheat_m1_e0_only);
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1);
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_HOTEND " " MSG_E2, lcd_preheat_m1_e1_only);
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E2, lcd_preheat_m1_e1_only);
#else
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0_only);
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1_only);
@ -1124,14 +1126,14 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2_only);
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2);
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_HOTEND " " MSG_E3, lcd_preheat_m1_e2_only);
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E3, lcd_preheat_m1_e2_only);
#else
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2_only);
#endif
#if HOTENDS > 3
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3);
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_HOTEND " " MSG_E4, lcd_preheat_m1_e3_only);
MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E4, lcd_preheat_m1_e3_only);
#else
MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3_only);
#endif
@ -1151,16 +1153,16 @@ void kill_screen(const char* lcd_msg) {
#if HOTENDS == 1
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0);
MENU_ITEM(function, MSG_PREHEAT_2 MSG_HOTEND, lcd_preheat_m2_e0_only);
MENU_ITEM(function, MSG_PREHEAT_2_END, lcd_preheat_m2_e0_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only);
#endif
#else
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0);
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_HOTEND " " MSG_E1, lcd_preheat_m2_e0_only);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E1, lcd_preheat_m2_e0_only);
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1);
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_HOTEND " " MSG_E2, lcd_preheat_m2_e1_only);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E2, lcd_preheat_m2_e1_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0_only);
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1_only);
@ -1169,14 +1171,14 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2_only);
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2);
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_HOTEND " " MSG_E3, lcd_preheat_m2_e2_only);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E3, lcd_preheat_m2_e2_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2_only);
#endif
#if HOTENDS > 3
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3);
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_HOTEND " " MSG_E4, lcd_preheat_m2_e3_only);
MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E4, lcd_preheat_m2_e3_only);
#else
MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3_only);
#endif
@ -1427,11 +1429,13 @@ KeepDrawing:
MENU_ITEM(submenu, MSG_LEVEL_BED, lcd_level_bed);
#endif
//
// Set Home Offsets
//
MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets);
//MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
#if DISABLED(NO_WORKSPACE_OFFSETS)
//
// Set Home Offsets
//
MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets);
//MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
#endif
//
// Disable Steppers

Loading…
Cancel
Save