Merge ConformingHostMessages (PR#2822)

Marlin/Marlin.h

@@ -351,6 +351,10 @@ extern uint8_t active_extruder;
   extern void digipot_i2c_init();
 #endif
 
+#if HAS_TEMP_0 || HAS_TEMP_BED || ENABLED(HEATER_0_USES_MAX6675)
+  void print_heaterstates();
+#endif
+
 extern void calculate_volumetric_multipliers();
 
 #endif //MARLIN_H

Marlin/Marlin_main.cpp

@@ -288,7 +288,6 @@ static millis_t stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME * 1000L;
 millis_t print_job_start_ms = 0; ///< Print job start time
 millis_t print_job_stop_ms = 0;  ///< Print job stop time
 static uint8_t target_extruder;
-bool no_wait_for_cooling = true;
 bool target_direction;
 
 #if ENABLED(AUTO_BED_LEVELING_FEATURE)
@@ -3803,14 +3802,9 @@ inline void gcode_M104() {
   }
 }
 
-/**
+#if HAS_TEMP_0 || HAS_TEMP_BED || ENABLED(HEATER_0_USES_MAX6675)
- * M105: Read hot end and bed temperature
- */
-inline void gcode_M105() {
-  if (setTargetedHotend(105)) return;
 
-  #if HAS_TEMP_0 || HAS_TEMP_BED || ENABLED(HEATER_0_USES_MAX6675)
+  void print_heaterstates() {
-    SERIAL_PROTOCOLPGM(MSG_OK);
     #if HAS_TEMP_0 || ENABLED(HEATER_0_USES_MAX6675)
       SERIAL_PROTOCOLPGM(" T:");
       SERIAL_PROTOCOL_F(degHotend(target_extruder), 1);
@@ -3823,6 +3817,7 @@ inline void gcode_M105() {
       SERIAL_PROTOCOLPGM(" /");
       SERIAL_PROTOCOL_F(degTargetBed(), 1);
     #endif
+    #if EXTRUDERS > 1
       for (int8_t e = 0; e < EXTRUDERS; ++e) {
         SERIAL_PROTOCOLPGM(" T");
         SERIAL_PROTOCOL(e);
@@ -3831,11 +3826,16 @@ inline void gcode_M105() {
         SERIAL_PROTOCOLPGM(" /");
         SERIAL_PROTOCOL_F(degTargetHotend(e), 1);
       }
-  #else // !HAS_TEMP_0 && !HAS_TEMP_BED
-    SERIAL_ERROR_START;
-    SERIAL_ERRORLNPGM(MSG_ERR_NO_THERMISTORS);
     #endif
-
+    #if HAS_TEMP_BED
+      SERIAL_PROTOCOLPGM(" B@:");
+      #ifdef BED_WATTS
+        SERIAL_PROTOCOL((BED_WATTS * getHeaterPower(-1)) / 127);
+        SERIAL_PROTOCOLCHAR('W');
+      #else
+        SERIAL_PROTOCOL(getHeaterPower(-1));
+      #endif
+    #endif
     SERIAL_PROTOCOLPGM(" @:");
     #ifdef EXTRUDER_WATTS
       SERIAL_PROTOCOL((EXTRUDER_WATTS * getHeaterPower(target_extruder)) / 127);
@@ -3843,15 +3843,19 @@ inline void gcode_M105() {
     #else
       SERIAL_PROTOCOL(getHeaterPower(target_extruder));
     #endif
-
+    #if EXTRUDERS > 1
-  SERIAL_PROTOCOLPGM(" B@:");
+      for (int8_t e = 0; e < EXTRUDERS; ++e) {
-  #ifdef BED_WATTS
+        SERIAL_PROTOCOLPGM(" @");
-    SERIAL_PROTOCOL((BED_WATTS * getHeaterPower(-1)) / 127);
+        SERIAL_PROTOCOL(e);
+        SERIAL_PROTOCOLCHAR(':');
+        #ifdef EXTRUDER_WATTS
+          SERIAL_PROTOCOL((EXTRUDER_WATTS * getHeaterPower(e)) / 127);
           SERIAL_PROTOCOLCHAR('W');
         #else
-    SERIAL_PROTOCOL(getHeaterPower(-1));
+          SERIAL_PROTOCOL(getHeaterPower(e));
+        #endif
+      }
     #endif
-
     #if ENABLED(SHOW_TEMP_ADC_VALUES)
       #if HAS_TEMP_BED
         SERIAL_PROTOCOLPGM("    ADC B:");
@@ -3868,6 +3872,22 @@ inline void gcode_M105() {
         SERIAL_PROTOCOL_F(rawHotendTemp(cur_extruder) / OVERSAMPLENR, 0);
       }
     #endif
+  }
+#endif
+
+/**
+ * M105: Read hot end and bed temperature
+ */
+inline void gcode_M105() {
+  if (setTargetedHotend(105)) return;
+
+  #if HAS_TEMP_0 || HAS_TEMP_BED || ENABLED(HEATER_0_USES_MAX6675)
+    SERIAL_PROTOCOLPGM(MSG_OK);
+    print_heaterstates();
+  #else // !HAS_TEMP_0 && !HAS_TEMP_BED
+    SERIAL_ERROR_START;
+    SERIAL_ERRORLNPGM(MSG_ERR_NO_THERMISTORS);
+  #endif
 
   SERIAL_EOL;
 }
@@ -3890,6 +3910,8 @@ inline void gcode_M105() {
  * M109: Wait for extruder(s) to reach temperature
  */
 inline void gcode_M109() {
+  bool no_wait_for_cooling = true;
+
   if (setTargetedHotend(109)) return;
   if (marlin_debug_flags & DEBUG_DRYRUN) return;
 
@@ -3931,10 +3953,9 @@ inline void gcode_M109() {
 
   { // while loop
     if (millis() > temp_ms + 1000UL) { //Print temp & remaining time every 1s while waiting
-      SERIAL_PROTOCOLPGM("T:");
+      #if HAS_TEMP_0 || HAS_TEMP_BED || ENABLED(HEATER_0_USES_MAX6675)
-      SERIAL_PROTOCOL_F(degHotend(target_extruder), 1);
+        print_heaterstates();
-      SERIAL_PROTOCOLPGM(" E:");
+      #endif
-      SERIAL_PROTOCOL((int)target_extruder);
       #ifdef TEMP_RESIDENCY_TIME
         SERIAL_PROTOCOLPGM(" W:");
         if (residency_start_ms > -1) {
@@ -3976,6 +3997,8 @@ inline void gcode_M109() {
    *       Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
    */
   inline void gcode_M190() {
+    bool no_wait_for_cooling = true;
+
     if (marlin_debug_flags & DEBUG_DRYRUN) return;
 
     LCD_MESSAGEPGM(MSG_BED_HEATING);
@@ -3993,13 +4016,10 @@ inline void gcode_M109() {
       if (ms > temp_ms + 1000UL) { //Print Temp Reading every 1 second while heating up.
         temp_ms = ms;
         float tt = degHotend(active_extruder);
-        SERIAL_PROTOCOLPGM("T:");
+        #if HAS_TEMP_0 || HAS_TEMP_BED || ENABLED(HEATER_0_USES_MAX6675)
-        SERIAL_PROTOCOL(tt);
+          print_heaterstates();
-        SERIAL_PROTOCOLPGM(" E:");
-        SERIAL_PROTOCOL((int)active_extruder);
-        SERIAL_PROTOCOLPGM(" B:");
-        SERIAL_PROTOCOL_F(degBed(), 1);
           SERIAL_EOL;
+        #endif
       }
       idle();
     }
@@ -4912,6 +4932,9 @@ inline void gcode_M303() {
   int e = code_seen('E') ? code_value_short() : 0;
   int c = code_seen('C') ? code_value_short() : 5;
   float temp = code_seen('S') ? code_value() : (e < 0 ? 70.0 : 150.0);
+
+  if (e >=0 && e < EXTRUDERS)
+    target_extruder = e;
   PID_autotune(temp, e, c);
 }
 

Marlin/temperature.cpp

@@ -328,19 +328,10 @@ void PID_autotune(float temp, int extruder, int ncycles) {
     }
     // Every 2 seconds...
     if (ms > temp_ms + 2000) {
-      int p;
+      #if HAS_TEMP_0 || HAS_TEMP_BED || ENABLED(HEATER_0_USES_MAX6675)
-      if (extruder < 0) {
+        print_heaterstates();
-        p = soft_pwm_bed;
+        SERIAL_EOL;
-        SERIAL_PROTOCOLPGM(MSG_B);
+      #endif
-      }
-      else {
-        p = soft_pwm[extruder];
-        SERIAL_PROTOCOLPGM(MSG_T);
-      }
-
-      SERIAL_PROTOCOL(input);
-      SERIAL_PROTOCOLPGM(MSG_AT);
-      SERIAL_PROTOCOLLN(p);
 
       temp_ms = ms;
     } // every 2 seconds