Merge pull request #1735 from AnHardt/compilerCandy

Remove some further warnings
master
Scott Lahteine 10 years ago
commit b47fa8c064

@ -256,9 +256,6 @@ static void _draw_heater_status(int x, int heater) {
} }
static void lcd_implementation_status_screen() { static void lcd_implementation_status_screen() {
static unsigned char fan_rot = 0;
u8g.setColorIndex(1); // black on white u8g.setColorIndex(1); // black on white
// Symbols menu graphics, animated fan // Symbols menu graphics, animated fan
@ -485,7 +482,7 @@ static void _drawmenu_sd(bool isSelected, uint8_t row, const char* pstr, const c
lcd_implementation_mark_as_selected(row, isSelected); lcd_implementation_mark_as_selected(row, isSelected);
if (isDir) lcd_print(LCD_STR_FOLDER[0]); if (isDir) lcd_print(LCD_STR_FOLDER[0]);
while (c = *filename) { while ((c = *filename)) {
n -= lcd_print(c); n -= lcd_print(c);
filename++; filename++;
} }

@ -459,7 +459,7 @@ ISR(TIMER1_COMPA_vect) {
#ifdef COREXY #ifdef COREXY
// Head direction in -X axis for CoreXY bots. // Head direction in -X axis for CoreXY bots.
// If DeltaX == -DeltaY, the movement is only in Y axis // If DeltaX == -DeltaY, the movement is only in Y axis
if (current_block->steps[A_AXIS] != current_block->steps[B_AXIS] || (TEST(out_bits, A_AXIS) == TEST(out_bits, B_AXIS))) if ((current_block->steps[A_AXIS] != current_block->steps[B_AXIS]) || (TEST(out_bits, A_AXIS) == TEST(out_bits, B_AXIS))) {
if (TEST(out_bits, X_HEAD)) if (TEST(out_bits, X_HEAD))
#else #else
if (TEST(out_bits, X_AXIS)) // stepping along -X axis (regular cartesians bot) if (TEST(out_bits, X_AXIS)) // stepping along -X axis (regular cartesians bot)
@ -487,9 +487,10 @@ ISR(TIMER1_COMPA_vect) {
} }
} }
#ifdef COREXY #ifdef COREXY
}
// Head direction in -Y axis for CoreXY bots. // Head direction in -Y axis for CoreXY bots.
// If DeltaX == DeltaY, the movement is only in X axis // If DeltaX == DeltaY, the movement is only in X axis
if (current_block->steps[A_AXIS] != current_block->steps[B_AXIS] || (TEST(out_bits, A_AXIS) != TEST(out_bits, B_AXIS))) if ((current_block->steps[A_AXIS] != current_block->steps[B_AXIS]) || (TEST(out_bits, A_AXIS) != TEST(out_bits, B_AXIS))) {
if (TEST(out_bits, Y_HEAD)) if (TEST(out_bits, Y_HEAD))
#else #else
if (TEST(out_bits, Y_AXIS)) // -direction if (TEST(out_bits, Y_AXIS)) // -direction
@ -504,6 +505,9 @@ ISR(TIMER1_COMPA_vect) {
UPDATE_ENDSTOP(y, Y, max, MAX); UPDATE_ENDSTOP(y, Y, max, MAX);
#endif #endif
} }
#ifdef COREXY
}
#endif
} }
if (TEST(out_bits, Z_AXIS)) { // -direction if (TEST(out_bits, Z_AXIS)) { // -direction

@ -83,6 +83,17 @@ unsigned char soft_pwm_bed;
#ifdef FILAMENT_SENSOR #ifdef FILAMENT_SENSOR
int current_raw_filwidth = 0; //Holds measured filament diameter - one extruder only int current_raw_filwidth = 0; //Holds measured filament diameter - one extruder only
#endif #endif
#if defined (THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0
void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc);
static int thermal_runaway_state_machine[4]; // = {0,0,0,0};
static unsigned long thermal_runaway_timer[4]; // = {0,0,0,0};
static bool thermal_runaway = false;
#if TEMP_SENSOR_BED != 0
static int thermal_runaway_bed_state_machine;
static unsigned long thermal_runaway_bed_timer;
#endif
#endif
//=========================================================================== //===========================================================================
//=============================private variables============================ //=============================private variables============================
//=========================================================================== //===========================================================================
@ -1100,8 +1111,8 @@ void disable_heater() {
} }
#ifdef HEATER_0_USES_MAX6675 #ifdef HEATER_0_USES_MAX6675
#define MAX6675_HEAT_INTERVAL 250 #define MAX6675_HEAT_INTERVAL 250u
long max6675_previous_millis = MAX6675_HEAT_INTERVAL; unsigned long max6675_previous_millis = MAX6675_HEAT_INTERVAL;
int max6675_temp = 2000; int max6675_temp = 2000;
static int read_max6675() { static int read_max6675() {

@ -146,16 +146,10 @@ void disable_heater();
void setWatch(); void setWatch();
void updatePID(); void updatePID();
#if defined (THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0 void PID_autotune(float temp, int extruder, int ncycles);
void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc);
static int thermal_runaway_state_machine[4]; // = {0,0,0,0}; void setExtruderAutoFanState(int pin, bool state);
static unsigned long thermal_runaway_timer[4]; // = {0,0,0,0}; void checkExtruderAutoFans();
static bool thermal_runaway = false;
#if TEMP_SENSOR_BED != 0
static int thermal_runaway_bed_state_machine;
static unsigned long thermal_runaway_bed_timer;
#endif
#endif
FORCE_INLINE void autotempShutdown() { FORCE_INLINE void autotempShutdown() {
#ifdef AUTOTEMP #ifdef AUTOTEMP
@ -167,9 +161,5 @@ FORCE_INLINE void autotempShutdown() {
#endif #endif
} }
void PID_autotune(float temp, int extruder, int ncycles);
void setExtruderAutoFanState(int pin, bool state);
void checkExtruderAutoFans();
#endif #endif

@ -43,7 +43,7 @@ static void ST7920_SWSPI_SND_8BIT(uint8_t val)
#define ST7920_NCS() {WRITE(ST7920_CS_PIN,0);} #define ST7920_NCS() {WRITE(ST7920_CS_PIN,0);}
#define ST7920_SET_CMD() {ST7920_SWSPI_SND_8BIT(0xf8);u8g_10MicroDelay();} #define ST7920_SET_CMD() {ST7920_SWSPI_SND_8BIT(0xf8);u8g_10MicroDelay();}
#define ST7920_SET_DAT() {ST7920_SWSPI_SND_8BIT(0xfa);u8g_10MicroDelay();} #define ST7920_SET_DAT() {ST7920_SWSPI_SND_8BIT(0xfa);u8g_10MicroDelay();}
#define ST7920_WRITE_BYTE(a) {ST7920_SWSPI_SND_8BIT((a)&0xf0);ST7920_SWSPI_SND_8BIT((a)<<4);u8g_10MicroDelay();} #define ST7920_WRITE_BYTE(a) {ST7920_SWSPI_SND_8BIT((uint8_t)((a)&0xf0u));ST7920_SWSPI_SND_8BIT((uint8_t)((a)<<4u));u8g_10MicroDelay();}
#define ST7920_WRITE_BYTES(p,l) {uint8_t i;for(i=0;i<l;i++){ST7920_SWSPI_SND_8BIT(*p&0xf0);ST7920_SWSPI_SND_8BIT(*p<<4);p++;}u8g_10MicroDelay();} #define ST7920_WRITE_BYTES(p,l) {uint8_t i;for(i=0;i<l;i++){ST7920_SWSPI_SND_8BIT(*p&0xf0);ST7920_SWSPI_SND_8BIT(*p<<4);p++;}u8g_10MicroDelay();}
uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)

Loading…
Cancel
Save