Merge pull request #8589 from fiveangle/bf11_babystepping_travis_options

[1.1.x] Additional Travis BABYSTEPPING tests
master
Scott Lahteine 7 years ago committed by GitHub
commit b781f76711
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

@ -100,12 +100,12 @@ script:
# #
- restore_configs - restore_configs
- opt_enable AUTO_BED_LEVELING_UBL DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL - opt_enable AUTO_BED_LEVELING_UBL DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING NANODLP_Z_SYNC - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING NANODLP_Z_SYNC
- build_marlin - build_marlin
# #
# And with a Sled Z Probe # And with a Sled Z Probe
# #
- opt_enable Z_PROBE_SLED - opt_enable Z_PROBE_SLED
- build_marlin - build_marlin
# #
# Test a Servo Probe # Test a Servo Probe

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -2417,8 +2417,8 @@ static void clean_up_after_endstop_or_probe_move() {
ny -= (Y_PROBE_OFFSET_FROM_EXTRUDER); ny -= (Y_PROBE_OFFSET_FROM_EXTRUDER);
} }
else if (!position_is_reachable(nx, ny)) return NAN; // The given position is in terms of the nozzle else if (!position_is_reachable(nx, ny)) return NAN; // The given position is in terms of the nozzle
const float nz = const float nz =
#if ENABLED(DELTA) #if ENABLED(DELTA)
// Move below clip height or xy move will be aborted by do_blocking_move_to // Move below clip height or xy move will be aborted by do_blocking_move_to
min(current_position[Z_AXIS], delta_clip_start_height) min(current_position[Z_AXIS], delta_clip_start_height)
@ -3446,7 +3446,7 @@ inline void gcode_G0_G1(
#else #else
prepare_move_to_destination(); prepare_move_to_destination();
#endif #endif
#if ENABLED(NANODLP_Z_SYNC) #if ENABLED(NANODLP_Z_SYNC)
// If G0/G1 command include Z-axis, wait for move and output sync text. // If G0/G1 command include Z-axis, wait for move and output sync text.
if (parser.seenval('Z')) { if (parser.seenval('Z')) {

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1505,10 +1505,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1511,10 +1511,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1505,10 +1505,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1509,10 +1509,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1475,10 +1475,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1516,10 +1516,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1510,10 +1510,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1510,10 +1510,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1510,10 +1510,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1510,10 +1510,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1515,10 +1515,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1510,10 +1510,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1509,10 +1509,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1508,10 +1508,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1498,10 +1498,10 @@
/** /**
* NanoDLP Sync support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

Loading…
Cancel
Save