Update all config files with the new G12 options

master
João Brázio 8 years ago committed by Scott Lahteine
parent 47fef80848
commit b869fbc05e

@ -894,12 +894,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -877,12 +877,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -875,12 +875,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -886,12 +886,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -888,12 +888,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -911,12 +911,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -894,12 +894,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -894,12 +894,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -894,12 +894,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -892,12 +892,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -902,12 +902,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -915,12 +915,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -886,12 +886,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -894,12 +894,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -989,12 +989,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -983,12 +983,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -986,12 +986,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -986,12 +986,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -988,12 +988,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -897,12 +897,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

@ -888,12 +888,12 @@
// Number of pattern repetitions // Number of pattern repetitions
#define NOZZLE_CLEAN_STROKES 12 #define NOZZLE_CLEAN_STROKES 12
// { X, Y, Z} // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_PT { 30, 30, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_PT {100, 60, (Z_MIN_POS + 5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Moves the nozzle to the parked position // Moves the nozzle to the initial position
#define NOZZLE_CLEAN_PARK #define NOZZLE_CLEAN_GOBACK
#endif #endif
// //

Loading…
Cancel
Save