Always define status LED pins

Marlin/pins_AZTEEG_X3.h

@@ -41,16 +41,14 @@
   #define DOGLCD_CS         32
   #define BTN_ENC           12
 
-  #if ENABLED(TEMP_STAT_LEDS)
+  #undef STAT_LED_RED_PIN
-    #undef STAT_LED_RED_PIN
+  #undef STAT_LED_BLUE_PIN
-    #undef STAT_LED_BLUE_PIN
+  #define STAT_LED_RED_PIN  64
-    #define STAT_LED_RED_PIN    64
+  #define STAT_LED_BLUE_PIN 63
-    #define STAT_LED_BLUE_PIN   63
-  #endif
 
-#elif ENABLED(TEMP_STAT_LEDS)
+#else
 
-  #define STAT_LED_RED_PIN       6
+  #define STAT_LED_RED_PIN   6
-  #define STAT_LED_BLUE_PIN     11
+  #define STAT_LED_BLUE_PIN 11
 
 #endif

Marlin/pins_AZTEEG_X3_PRO.h

@@ -117,6 +117,6 @@
   #undef SD_DETECT_PIN
   #define SD_DETECT_PIN    49 // For easy adapter board
 #else
-  #define STAT_LED_RED_PIN     32
+  #define STAT_LED_RED_PIN 32
-  #define STAT_LED_BLUE_PIN    35
+  #define STAT_LED_BLUE_PIN 35
 #endif

Marlin/pins_CNCONTROLS_11.h

@@ -115,5 +115,5 @@
 //
 // Misc. Functions
 //
-#define STAT_LED_BLUE_PIN      -1
+#define STAT_LED_BLUE_PIN  -1
-#define STAT_LED_RED_PIN       31
+#define STAT_LED_RED_PIN   31

Marlin/pins_CNCONTROLS_12.h

@@ -111,8 +111,8 @@
 //#define UI1              43
 //#define UI2              37
 
-#define STAT_LED_BLUE_PIN      -1
+#define STAT_LED_BLUE_PIN  -1
-#define STAT_LED_RED_PIN       10 // TOOL_0_PWM_PIN
+#define STAT_LED_RED_PIN   10 // TOOL_0_PWM_PIN
 
 //
 // SD Card

Marlin/pins_MKS_13.h

@@ -120,9 +120,9 @@
   #define BEEPER_PIN      25
 
   // yellow               RED-LED
-  #define STAT_LED_RED_PIN    16
+  #define STAT_LED_RED_PIN 16
 
   // white                BLUE-LED
-  #define STAT_LED_BLUE_PIN   17
+  #define STAT_LED_BLUE_PIN 17
 
 #endif

Marlin/pins_PRINTRBOARD.h

@@ -131,8 +131,8 @@
 
   #define SDSS 45
   #define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test)
-  #if ENABLED(TEMP_STAT_LEDS)
+
-    #define STAT_LED_RED_PIN      12 //Non-FastIO
+  #define STAT_LED_RED_PIN  12 //Non-FastIO
-    #define STAT_LED_BLUE_PIN     10 //Non-FastIO
+  #define STAT_LED_BLUE_PIN 10 //Non-FastIO
-  #endif
+
 #endif

Marlin/pins_PRINTRBOARD_REVF.h

@@ -117,21 +117,18 @@
 
 #if ENABLED(VIKI2) || ENABLED(miniVIKI)
   #define BEEPER_PIN 32 //FastIO
-  // Pins for DOGM SPI LCD Support
   #define DOGLCD_A0  42 //Non-FastIO
   #define DOGLCD_CS  43 //Non-FastIO
   #define LCD_SCREEN_ROT_180
 
-  //The encoder and click button (FastIO Pins)
+  // (FastIO Pins)
   #define BTN_EN1 26
   #define BTN_EN2 27
   #define BTN_ENC 47
 
   #define SDSS 45
-  #define SD_DETECT_PIN -1 // FastIO (Manual says 72 I'm not certain cause I can't test)
+  #define SD_DETECT_PIN -1 // FastIO (Manual says 72)
 
-  #if ENABLED(TEMP_STAT_LEDS)
+  #define STAT_LED_RED_PIN 12 //Non-FastIO
-    #define STAT_LED_RED_PIN      12 //Non-FastIO
+  #define STAT_LED_BLUE_PIN 10 //Non-FastIO
-    #define STAT_LED_BLUE_PIN     10 //Non-FastIO
-  #endif
 #endif

Marlin/pins_RAMBO.h

@@ -169,10 +169,8 @@
 
       #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
 
-      #if ENABLED(TEMP_STAT_LEDS)
+      #define STAT_LED_RED_PIN 22
-        #define STAT_LED_RED_PIN      22
+      #define STAT_LED_BLUE_PIN 32
-        #define STAT_LED_BLUE_PIN     32
-      #endif
 
     #else
 

Marlin/pins_RAMPS.h

@@ -280,10 +280,9 @@
 
       #define KILL_PIN         31
 
-      #if ENABLED(TEMP_STAT_LEDS)
+      #define STAT_LED_RED_PIN 32
-        #define STAT_LED_RED_PIN   32
+      #define STAT_LED_BLUE_PIN 35
-        #define STAT_LED_BLUE_PIN  35
+
-      #endif
     #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
       #define BTN_EN1 35  // reverse if the encoder turns the wrong way.
       #define BTN_EN2 37