forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Overridable Options - Part 4 (PR#2556)

Browse Source 
Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.
master
Scott Lahteine 9 years ago committed by Richard Wackerbarth
parent 4b40964064
commit c0d7ea3e7e
21 changed files with 99 additions and 95 deletions
Show Stats Download Patch File Download Diff File

18
Marlin/pins.h
Unescape View File

@ -175,7 +175,7 @@
#endif #endif
#endif #endif
#ifdef DISABLE_MAX_ENDSTOPS #if ENABLED(DISABLE_MAX_ENDSTOPS)
#undef X_MAX_PIN #undef X_MAX_PIN
#undef Y_MAX_PIN #undef Y_MAX_PIN
#undef Z_MAX_PIN #undef Z_MAX_PIN
@ -184,7 +184,7 @@
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
#endif #endif
#ifdef DISABLE_MIN_ENDSTOPS #if ENABLED(DISABLE_MIN_ENDSTOPS)
#undef X_MIN_PIN #undef X_MIN_PIN
#undef Y_MIN_PIN #undef Y_MIN_PIN
#undef Z_MIN_PIN #undef Z_MIN_PIN
@ -193,36 +193,36 @@
#define Z_MIN_PIN -1 #define Z_MIN_PIN -1
#endif #endif
#if defined(DISABLE_Z_PROBE_ENDSTOP) || !defined(Z_PROBE_ENDSTOP) // Allow code to compile regardless of Z_PROBE_ENDSTOP setting. #if ENABLED(DISABLE_Z_PROBE_ENDSTOP) || DISABLED(Z_PROBE_ENDSTOP) // Allow code to compile regardless of Z_PROBE_ENDSTOP setting.
#undef Z_PROBE_PIN #undef Z_PROBE_PIN
#define Z_PROBE_PIN -1 #define Z_PROBE_PIN -1
#endif #endif
#ifdef DISABLE_XMAX_ENDSTOP #if ENABLED(DISABLE_XMAX_ENDSTOP)
#undef X_MAX_PIN #undef X_MAX_PIN
#define X_MAX_PIN -1 #define X_MAX_PIN -1
#endif #endif
#ifdef DISABLE_XMIN_ENDSTOP #if ENABLED(DISABLE_XMIN_ENDSTOP)
#undef X_MIN_PIN #undef X_MIN_PIN
#define X_MIN_PIN -1 #define X_MIN_PIN -1
#endif #endif
#ifdef DISABLE_YMAX_ENDSTOP #if ENABLED(DISABLE_YMAX_ENDSTOP)
#define Y_MAX_PIN -1 #define Y_MAX_PIN -1
#endif #endif
#ifdef DISABLE_YMIN_ENDSTOP #if ENABLED(DISABLE_YMIN_ENDSTOP)
#undef Y_MIN_PIN #undef Y_MIN_PIN
#define Y_MIN_PIN -1 #define Y_MIN_PIN -1
#endif #endif
#ifdef DISABLE_ZMAX_ENDSTOP #if ENABLED(DISABLE_ZMAX_ENDSTOP)
#undef Z_MAX_PIN #undef Z_MAX_PIN
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
#endif #endif
#ifdef DISABLE_ZMIN_ENDSTOP #if ENABLED(DISABLE_ZMIN_ENDSTOP)
#undef Z_MIN_PIN #undef Z_MIN_PIN
#define Z_MIN_PIN -1 #define Z_MIN_PIN -1
#endif #endif

2
Marlin/pins_3DRAG.h
Unescape View File

@ -29,7 +29,7 @@
#define HEATER_BED_PIN 9 // BED #define HEATER_BED_PIN 9 // BED
#if defined(ULTRA_LCD) && defined(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#undef BEEPER #undef BEEPER
#define BEEPER -1 #define BEEPER -1

2
Marlin/pins_5DPRINT.h
Unescape View File

@ -52,7 +52,7 @@
// The SDSS pin uses a different pin mapping from file Sd2PinMap.h // The SDSS pin uses a different pin mapping from file Sd2PinMap.h
#define SDSS 20 #define SDSS 20
#ifndef SDSUPPORT #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 9 #define SCK_PIN 9
#define MISO_PIN 11 #define MISO_PIN 11

10
Marlin/pins_AZTEEG_X3.h
Unescape View File

@ -6,7 +6,8 @@
//LCD Pins// //LCD Pins//
#if defined(VIKI2) || defined(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 33 #define BEEPER 33
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 31 #define DOGLCD_A0 31
@ -21,11 +22,14 @@
#define SDSS 53 #define SDSS 53
#define SDCARDDETECT -1 // Pin 49 if using display sd interface #define SDCARDDETECT -1 // Pin 49 if using display sd interface
#ifdef TEMP_STAT_LEDS #if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 64 #define STAT_LED_RED 64
#define STAT_LED_BLUE 63 #define STAT_LED_BLUE 63
#endif #endif
#elif defined(TEMP_STAT_LEDS)
#elif ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 6 #define STAT_LED_RED 6
#define STAT_LED_BLUE 11 #define STAT_LED_BLUE 11
#endif #endif

10
Marlin/pins_AZTEEG_X3_PRO.h
Unescape View File

@ -18,7 +18,7 @@
//MIN endstops soldered onto the board. Delta code wants the homing endstops to be //MIN endstops soldered onto the board. Delta code wants the homing endstops to be
//the MAX so I swapped them here. //the MAX so I swapped them here.
// //
#ifdef DELTA #if ENABLED(DELTA)
#undef X_MIN_PIN #undef X_MIN_PIN
#undef X_MAX_PIN #undef X_MAX_PIN
#undef Y_MIN_PIN #undef Y_MIN_PIN
@ -34,7 +34,7 @@
#define Z_MAX_PIN 18 #define Z_MAX_PIN 18
#endif #endif
// //
#ifdef Z_PROBE_ENDSTOP #if ENABLED(Z_PROBE_ENDSTOP)
//#undef Z_MIN_PIN //#undef Z_MIN_PIN
//#define Z_MIN_PIN 15 //#define Z_MIN_PIN 15
#define Z_PROBE_PIN 19 #define Z_PROBE_PIN 19
@ -81,7 +81,7 @@
#undef SERVO2_PIN #undef SERVO2_PIN
#undef SERVO3_PIN #undef SERVO3_PIN
#ifdef NUM_SERVOS #if HAS_SERVOS
#define SERVO0_PIN 47 #define SERVO0_PIN 47
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN -1 #define SERVO1_PIN -1
@ -96,7 +96,7 @@
//LCD Pins// //LCD Pins//
#if defined(VIKI2) || defined(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 33 #define BEEPER 33
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 44
@ -114,7 +114,7 @@
#define KILL_PIN 31 #define KILL_PIN 31
#endif #endif
#ifdef TEMP_STAT_LEDS #if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 32 #define STAT_LED_RED 32
#define STAT_LED_BLUE 35 #define STAT_LED_BLUE 35
#endif #endif

2
Marlin/pins_BRAINWAVE.h
Unescape View File

@ -50,7 +50,7 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define ALARM_PIN -1 #define ALARM_PIN -1
#ifndef SDSUPPORT #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 9 #define SCK_PIN 9
#define MISO_PIN 11 #define MISO_PIN 11

2
Marlin/pins_BRAINWAVE_PRO.h
Unescape View File

@ -56,7 +56,7 @@
#define ALARM_PIN -1 #define ALARM_PIN -1
#define SDCARDDETECT 12 #define SDCARDDETECT 12
#ifndef SDSUPPORT #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 21 #define SCK_PIN 21
#define MISO_PIN 23 #define MISO_PIN 23

4
Marlin/pins_ELEFU_3.h
Unescape View File

@ -61,7 +61,7 @@
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // Data from: http://www.doc-diy.net/photo/rc-1_hacked/
#define PHOTOGRAPH_PIN 29 #define PHOTOGRAPH_PIN 29
#ifdef RA_CONTROL_PANEL #if ENABLED(RA_CONTROL_PANEL)
#define SDSS 53 #define SDSS 53
#define SDCARDDETECT 28 #define SDCARDDETECT 28
@ -76,7 +76,7 @@
#endif // RA_CONTROL_PANEL #endif // RA_CONTROL_PANEL
#ifdef RA_DISCO #if ENABLED(RA_DISCO)
//variables for which pins the TLC5947 is using //variables for which pins the TLC5947 is using
#define TLC_CLOCK_PIN 25 #define TLC_CLOCK_PIN 25
#define TLC_BLANK_PIN 23 #define TLC_BLANK_PIN 23

2
Marlin/pins_FELIX2.h
Unescape View File

@ -14,7 +14,7 @@
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#if defined(ULTRA_LCD) && defined(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#define BLEN_C 2 #define BLEN_C 2
#define BLEN_B 1 #define BLEN_B 1

4
Marlin/pins_MEGATRONICS_3.h
Unescape View File

@ -9,12 +9,12 @@
#define LARGE_FLASH true #define LARGE_FLASH true
#ifdef Z_PROBE_SLED #if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1 #define SLED_PIN -1
#endif #endif
// Servo support // Servo support
#ifdef NUM_SERVOS #if HAS_SERVOS
#define SERVO0_PIN 46 //AUX3-6 #define SERVO0_PIN 46 //AUX3-6
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 47 //AUX3-5 #define SERVO1_PIN 47 //AUX3-5

6
Marlin/pins_MINIRAMBO.h
Unescape View File

@ -53,7 +53,7 @@
#define HEATER_1_PIN 7 #define HEATER_1_PIN 7
#define TEMP_1_PIN 1 #define TEMP_1_PIN 1
#ifdef BARICUDA #if ENABLED(BARICUDA)
#define HEATER_2_PIN 6 #define HEATER_2_PIN 6
#else #else
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
@ -88,9 +88,9 @@
#define KILL_PIN -1 //80 with Smart Controller LCD #define KILL_PIN -1 //80 with Smart Controller LCD
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing. #define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#ifdef ULTRA_LCD #if ENABLED(ULTRA_LCD)
#define KILL_PIN 32 #define KILL_PIN 32
#ifdef NEWPANEL #if ENABLED(NEWPANEL)
//arduino pin which triggers an piezzo beeper //arduino pin which triggers an piezzo beeper
#define BEEPER 84 // Beeper on AUX-4 #define BEEPER 84 // Beeper on AUX-4
#define LCD_PINS_RS 82 #define LCD_PINS_RS 82

16
Marlin/pins_PRINTRBOARD.h
Unescape View File

@ -9,7 +9,7 @@
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu. #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
#endif #endif
#ifdef AT90USBxx_TEENSYPP_ASSIGNMENTS // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional. #if ENABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional.
#error These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h #error These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h
#endif #endif
@ -38,7 +38,7 @@
// If soft or fast PWM is off then use Teensyduino pin numbering, Marlin // If soft or fast PWM is off then use Teensyduino pin numbering, Marlin
// fastio pin numbering otherwise // fastio pin numbering otherwise
#ifdef FAN_SOFT_PWM || FAST_PWM_FAN #if ENABLED(FAN_SOFT_PWM) || ENABLED(FAST_PWM_FAN)
#define FAN_PIN 22 #define FAN_PIN 22
#else #else
#define FAN_PIN 16 #define FAN_PIN 16
@ -54,7 +54,7 @@
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering #define TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering #define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#ifdef FILAMENT_SENSOR #if ENABLED(FILAMENT_SENSOR)
#define FILWIDTH_PIN 2 #define FILWIDTH_PIN 2
#endif #endif
@ -70,18 +70,18 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define ALARM_PIN -1 #define ALARM_PIN -1
#ifndef SDSUPPORT #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 9 #define SCK_PIN 9
#define MISO_PIN 11 #define MISO_PIN 11
#define MOSI_PIN 10 #define MOSI_PIN 10
#endif #endif
#if defined(ULTRA_LCD) && defined(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
//we have no buzzer installed //we have no buzzer installed
#define BEEPER -1 #define BEEPER -1
//LCD Pins //LCD Pins
#ifdef LCD_I2C_PANELOLU2 #if ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 27 //RX1 - fastio.h pin mapping 27 #define BTN_EN1 27 //RX1 - fastio.h pin mapping 27
#define BTN_EN2 26 //TX1 - fastio.h pin mapping 26 #define BTN_EN2 26 //TX1 - fastio.h pin mapping 26
#define BTN_ENC 43 //A3 - fastio.h pin mapping 43 #define BTN_ENC 43 //A3 - fastio.h pin mapping 43
@ -91,7 +91,7 @@
#define SDCARDDETECT -1 #define SDCARDDETECT -1
#endif // ULTRA_LCD && NEWPANEL #endif // ULTRA_LCD && NEWPANEL
#if defined(VIKI2) || defined(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 32 //FastIO #define BEEPER 32 //FastIO
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 42 //Non-FastIO #define DOGLCD_A0 42 //Non-FastIO
@ -106,7 +106,7 @@
#define SDSS 45 #define SDSS 45
#define SDCARDDETECT -1 // FastIO (Manual says 72 I'm not certain cause I can't test) #define SDCARDDETECT -1 // FastIO (Manual says 72 I'm not certain cause I can't test)
#ifdef TEMP_STAT_LEDS #if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 12 //Non-FastIO #define STAT_LED_RED 12 //Non-FastIO
#define STAT_LED_BLUE 10 //Non-FastIO #define STAT_LED_BLUE 10 //Non-FastIO
#endif #endif

16
Marlin/pins_RAMBO.h
Unescape View File

@ -9,7 +9,7 @@
#define LARGE_FLASH true #define LARGE_FLASH true
// Servo support // Servo support
#ifdef NUM_SERVOS #if HAS_SERVOS
#define SERVO0_PIN 22 //motor header MX1 #define SERVO0_PIN 22 //motor header MX1
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 23 //Motor header MX2 #define SERVO1_PIN 23 //Motor header MX2
@ -22,7 +22,7 @@
#endif #endif
#endif #endif
#ifdef Z_PROBE_SLED #if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1 #define SLED_PIN -1
#endif #endif
@ -70,7 +70,7 @@
#define HEATER_1_PIN 7 #define HEATER_1_PIN 7
#define TEMP_1_PIN 1 #define TEMP_1_PIN 1
#ifdef BARICUDA #if ENABLED(BARICUDA)
#define HEATER_2_PIN 6 #define HEATER_2_PIN 6
#else #else
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
@ -109,9 +109,9 @@
#define KILL_PIN -1 //80 with Smart Controller LCD #define KILL_PIN -1 //80 with Smart Controller LCD
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing. #define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#ifdef ULTRA_LCD #if ENABLED(ULTRA_LCD)
#define KILL_PIN 80 #define KILL_PIN 80
#ifdef NEWPANEL #if ENABLED(NEWPANEL)
//arduino pin which triggers an piezzo beeper //arduino pin which triggers an piezzo beeper
#define BEEPER 79 // Beeper on AUX-4 #define BEEPER 79 // Beeper on AUX-4
#define LCD_PINS_RS 70 #define LCD_PINS_RS 70
@ -164,7 +164,7 @@
#endif // ULTRA_LCD #endif // ULTRA_LCD
#if defined(VIKI2) || defined(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 44 #define BEEPER 44
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 70 #define DOGLCD_A0 70
@ -178,13 +178,13 @@
#define SDCARDDETECT -1 // Pin 72 if using easy adapter board #define SDCARDDETECT -1 // Pin 72 if using easy adapter board
#ifdef TEMP_STAT_LEDS #if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 22 #define STAT_LED_RED 22
#define STAT_LED_BLUE 32 #define STAT_LED_BLUE 32
#endif #endif
#endif // VIKI2/miniVIKI #endif // VIKI2/miniVIKI
#ifdef FILAMENT_SENSOR #if ENABLED(FILAMENT_SENSOR)
//Filip added pin for Filament sensor analog input //Filip added pin for Filament sensor analog input
#define FILWIDTH_PIN 3 #define FILWIDTH_PIN 3
#endif #endif

41
Marlin/pins_RAMPS_13.h
Unescape View File

@ -61,23 +61,23 @@
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#if MB(RAMPS_13_EEB) && defined(FILAMENT_SENSOR) // FMM added for Filament Extruder #if MB(RAMPS_13_EEB) && ENABLED(FILAMENT_SENSOR) // FMM added for Filament Extruder
// define analog pin for the filament width sensor input // define analog pin for the filament width sensor input
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector // Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
#define FILWIDTH_PIN 5 #define FILWIDTH_PIN 5
#endif #endif
#ifdef Z_PROBE_ENDSTOP #if ENABLED(Z_PROBE_ENDSTOP)
// Define a pin to use as the signal pin on Arduino for the Z_PROBE endstop. // Define a pin to use as the signal pin on Arduino for the Z_PROBE endstop.
#define Z_PROBE_PIN 32 #define Z_PROBE_PIN 32
#endif #endif
#ifdef FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR)
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector // define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#define FILRUNOUT_PIN 4 #define FILRUNOUT_PIN 4
#endif #endif
#if MB(RAMPS_13_EFF) || defined(IS_RAMPS_EFB) #if MB(RAMPS_13_EFF) || ENABLED(IS_RAMPS_EFB)
#define FAN_PIN 9 // (Sprinter config) #define FAN_PIN 9 // (Sprinter config)
#if MB(RAMPS_13_EFF) #if MB(RAMPS_13_EFF)
#define CONTROLLERFAN_PIN -1 // Pin used for the fan to cool controller #define CONTROLLERFAN_PIN -1 // Pin used for the fan to cool controller
@ -90,7 +90,7 @@
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL)
#define KILL_PIN 41 #define KILL_PIN 41
#else #else
#define KILL_PIN -1 #define KILL_PIN -1
@ -102,7 +102,7 @@
#define HEATER_0_PIN 10 // EXTRUDER 1 #define HEATER_0_PIN 10 // EXTRUDER 1
#endif #endif
#if MB(RAMPS_13_SF) || defined(IS_RAMPS_EFB) #if MB(RAMPS_13_SF) || ENABLED(IS_RAMPS_EFB)
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#else #else
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter) #define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
@ -122,7 +122,7 @@
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
#ifdef NUM_SERVOS #if HAS_SERVOS
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 6 #define SERVO1_PIN 6
@ -135,15 +135,14 @@
#endif #endif
#endif #endif
#ifdef Z_PROBE_SLED #if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1 #define SLED_PIN -1
#endif #endif
#ifdef ULTRA_LCD #if ENABLED(ULTRA_LCD)
#ifdef NEWPANEL #if ENABLED(NEWPANEL)
#if ENABLED(PANEL_ONE)
#ifdef PANEL_ONE
#define LCD_PINS_RS 40 #define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42 #define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65 #define LCD_PINS_D4 65
@ -159,7 +158,7 @@
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
#endif #endif
#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER 37 #define BEEPER 37
#define BTN_EN1 31 #define BTN_EN1 31
@ -167,20 +166,20 @@
#define BTN_ENC 35 #define BTN_ENC 35
#define SDCARDDETECT 49 #define SDCARDDETECT 49
#elif defined(LCD_I2C_PANELOLU2) #elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way. #define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43 #define BTN_EN2 43
#define BTN_ENC 32 #define BTN_ENC 32
#define LCD_SDSS 53 #define LCD_SDSS 53
#define SDCARDDETECT -1 #define SDCARDDETECT -1
#define KILL_PIN 41 #define KILL_PIN 41
#elif defined(LCD_I2C_VIKI) #elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way. #define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7 #define BTN_EN2 7
#define BTN_ENC -1 #define BTN_ENC -1
#define LCD_SDSS 53 #define LCD_SDSS 53
#define SDCARDDETECT 49 #define SDCARDDETECT 49
#elif defined(ELB_FULL_GRAPHIC_CONTROLLER) #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way. #define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37 #define BTN_EN2 37
#define BTN_ENC 31 #define BTN_ENC 31
@ -217,14 +216,14 @@
#define BEEPER 33 // Beeper on AUX-4 #define BEEPER 33 // Beeper on AUX-4
// buttons are directly attached using AUX-2 // buttons are directly attached using AUX-2
#ifdef REPRAPWORLD_KEYPAD #if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder #define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder #define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button #define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register #define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register #define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register #define SHIFT_LD 42 // shift register
#elif defined(PANEL_ONE) #elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3 #define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4 #define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7 #define BTN_ENC 49 // AUX3 PIN 7
@ -234,7 +233,7 @@
#define BTN_ENC 31 // the click #define BTN_ENC 31 // the click
#endif #endif
#ifdef G3D_PANEL #if ENABLED(G3D_PANEL)
#define SDCARDDETECT 49 #define SDCARDDETECT 49
#else #else
#define SDCARDDETECT -1 // Ramps does not use this port #define SDCARDDETECT -1 // Ramps does not use this port
@ -264,13 +263,13 @@
#endif // ULTRA_LCD #endif // ULTRA_LCD
// SPI for Max6675 Thermocouple // SPI for Max6675 Thermocouple
#ifndef SDSUPPORT #if DISABLED(SDSUPPORT)
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
#ifndef SDSUPPORT #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 52 #define SCK_PIN 52
#define MISO_PIN 50 #define MISO_PIN 50

6
Marlin/pins_RAMPS_OLD.h
Unescape View File

@ -37,7 +37,7 @@
#define PS_ON_PIN -1 #define PS_ON_PIN -1
#define KILL_PIN -1 #define KILL_PIN -1
#ifdef RAMPS_V_1_0 // RAMPS_V_1_0 #if ENABLED(RAMPS_V_1_0) // RAMPS_V_1_0
#define HEATER_0_PIN 12 // RAMPS 1.0 #define HEATER_0_PIN 12 // RAMPS 1.0
#define HEATER_BED_PIN -1 // RAMPS 1.0 #define HEATER_BED_PIN -1 // RAMPS 1.0
#define FAN_PIN 11 // RAMPS 1.0 #define FAN_PIN 11 // RAMPS 1.0
@ -55,13 +55,13 @@
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
// SPI for Max6675 Thermocouple // SPI for Max6675 Thermocouple
#ifndef SDSUPPORT #if DISABLED(SDSUPPORT)
#define MAX6675_SS 66// Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS 66// Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS 66// Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS 66// Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
#ifndef SDSUPPORT #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 52 #define SCK_PIN 52
#define MISO_PIN 50 #define MISO_PIN 50

4
Marlin/pins_RIGIDBOARD.h
Unescape View File

@ -4,7 +4,7 @@
#include "pins_RAMPS_13.h" #include "pins_RAMPS_13.h"
#ifdef Z_PROBE_ENDSTOP #if ENABLED(Z_PROBE_ENDSTOP)
#define Z_PROBE_PIN 19 #define Z_PROBE_PIN 19
#endif #endif
@ -20,7 +20,7 @@
// LCD Panel options for the RigidBoard // LCD Panel options for the RigidBoard
#ifdef RIGIDBOT_PANEL #if ENABLED(RIGIDBOT_PANEL)
#undef BEEPER #undef BEEPER
#define BEEPER -1 #define BEEPER -1

19
Marlin/pins_SANGUINOLOLU_11.h
Unescape View File

@ -33,11 +33,11 @@
#endif #endif
#endif #endif
#ifdef Z_PROBE_SLED #if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1 #define SLED_PIN -1
#endif #endif
#ifdef NUM_SERVOS #if HAS_SERVOS
#define SERVO0_PIN -1 #define SERVO0_PIN -1
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN -1 #define SERVO1_PIN -1
@ -57,7 +57,7 @@
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#ifdef SANGUINOLOLU_V_1_2 #if ENABLED(SANGUINOLOLU_V_1_2)
#define HEATER_BED_PIN 12 // (bed) #define HEATER_BED_PIN 12 // (bed)
#define X_ENABLE_PIN 14 #define X_ENABLE_PIN 14
@ -65,7 +65,7 @@
#define Z_ENABLE_PIN 26 #define Z_ENABLE_PIN 26
#define E0_ENABLE_PIN 14 #define E0_ENABLE_PIN 14
#ifdef LCD_I2C_PANELOLU2 #if ENABLED(LCD_I2C_PANELOLU2)
#define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan #define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan
#endif #endif
@ -92,15 +92,15 @@
*/ */
//#define SDSS 24 //#define SDSS 24
#if defined(ULTRA_LCD) && defined(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
// No buzzer installed // No buzzer installed
#define BEEPER -1 #define BEEPER -1
// LCD Pins // LCD Pins
#ifdef DOGLCD #if ENABLED(DOGLCD)
#ifdef U8GLIB_ST7920 //SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0 #if ENABLED(U8GLIB_ST7920) //SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
#if MB(MELZI) // Melzi board #if MB(MELZI) // Melzi board
#define LCD_PINS_RS 30 //CS chip select /SS chip slave select #define LCD_PINS_RS 30 //CS chip select /SS chip slave select
@ -144,7 +144,7 @@
//The encoder and click button //The encoder and click button
#define BTN_EN1 11 #define BTN_EN1 11
#define BTN_EN2 10 #define BTN_EN2 10
#ifdef LCD_I2C_PANELOLU2 #if ENABLED(LCD_I2C_PANELOLU2)
#if MB(MELZI) #if MB(MELZI)
#define BTN_ENC 29 #define BTN_ENC 29
#define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi #define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi
@ -158,9 +158,10 @@
#define SDCARDDETECT -1 #define SDCARDDETECT -1
#elif defined(MAKRPANEL) #elif ENABLED(MAKRPANEL)
#define BEEPER 29 #define BEEPER 29
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 30 #define DOGLCD_A0 30
#define DOGLCD_CS 17 #define DOGLCD_CS 17

8
Marlin/pins_SAV_MKI.h
Unescape View File

@ -45,7 +45,7 @@
#define TEMP_1_PIN -1 #define TEMP_1_PIN -1
#define TEMP_2_PIN -1 #define TEMP_2_PIN -1
#ifndef SDSUPPORT #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 9 #define SCK_PIN 9
#define MISO_PIN 11 #define MISO_PIN 11
@ -93,13 +93,13 @@
#define LCD_PINS_D6 -1 #define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1 #define LCD_PINS_D7 -1
#ifdef SAV_3DLCD #if ENABLED(SAV_3DLCD)
// For LCD SHIFT register LCD // For LCD SHIFT register LCD
#define SR_DATA_PIN EXT_AUX_SDA_D1 #define SR_DATA_PIN EXT_AUX_SDA_D1
#define SR_CLK_PIN EXT_AUX_SCL_D0 #define SR_CLK_PIN EXT_AUX_SCL_D0
#endif // SAV_3DLCD #endif // SAV_3DLCD
#if defined(SAV_3DLCD)||defined(SAV_3DGLCD) #if ENABLED(SAV_3DLCD) || ENABLED(SAV_3DGLCD)
#define BTN_EN1 EXT_AUX_A1_IO #define BTN_EN1 EXT_AUX_A1_IO
#define BTN_EN2 EXT_AUX_A0_IO #define BTN_EN2 EXT_AUX_A0_IO
#define BTN_ENC EXT_AUX_PWM_D24 #define BTN_ENC EXT_AUX_PWM_D24
@ -108,6 +108,6 @@
#define HOME_PIN EXT_AUX_A4_IO #define HOME_PIN EXT_AUX_A4_IO
#endif // SAV_3DLCD || SAV_3DGLCD #endif // SAV_3DLCD || SAV_3DGLCD
#ifdef NUM_SERVOS #if HAS_SERVOS
#define SERVO0_PIN 41 // In teensy's pin definition for pinMode (in servo.cpp) #define SERVO0_PIN 41 // In teensy's pin definition for pinMode (in servo.cpp)
#endif #endif

4
Marlin/pins_TEENSY2.h
Unescape View File

@ -93,14 +93,14 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define ALARM_PIN -1 #define ALARM_PIN -1
#ifndef SDSUPPORT #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 21 // 9 #define SCK_PIN 21 // 9
#define MISO_PIN 23 // 11 #define MISO_PIN 23 // 11
#define MOSI_PIN 22 // 10 #define MOSI_PIN 22 // 10
#endif #endif
#ifdef ULTIPANEL #if ENABLED(ULTIPANEL)
#define LCD_PINS_RS 8 #define LCD_PINS_RS 8
#define LCD_PINS_ENABLE 9 #define LCD_PINS_ENABLE 9
#define LCD_PINS_D4 10 #define LCD_PINS_D4 10

10
Marlin/pins_TEENSYLU.h
Unescape View File

@ -9,7 +9,7 @@
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu. #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
#endif #endif
#ifdef AT90USBxx_TEENSYPP_ASSIGNMENTS // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional. #if ENABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional.
#error These Teensylu assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h #error These Teensylu assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h
#endif #endif
@ -38,7 +38,7 @@
// If soft or fast PWM is off then use Teensyduino pin numbering, Marlin // If soft or fast PWM is off then use Teensyduino pin numbering, Marlin
// fastio pin numbering otherwise // fastio pin numbering otherwise
#ifdef FAN_SOFT_PWM || FAST_PWM_FAN #if ENABLED(FAN_SOFT_PWM) || ENABLED(FAST_PWM_FAN)
#define FAN_PIN 22 #define FAN_PIN 22
#else #else
#define FAN_PIN 16 #define FAN_PIN 16
@ -60,18 +60,18 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define ALARM_PIN -1 #define ALARM_PIN -1
#ifndef SDSUPPORT #if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support // these pins are defined in the SD library if building with SD support
#define SCK_PIN 9 #define SCK_PIN 9
#define MISO_PIN 11 #define MISO_PIN 11
#define MOSI_PIN 10 #define MOSI_PIN 10
#endif #endif
#if defined(ULTRA_LCD) && defined(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
//we have no buzzer installed //we have no buzzer installed
#define BEEPER -1 #define BEEPER -1
//LCD Pins //LCD Pins
#ifdef LCD_I2C_PANELOLU2 #if ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 27 //RX1 - fastio.h pin mapping 27 #define BTN_EN1 27 //RX1 - fastio.h pin mapping 27
#define BTN_EN2 26 //TX1 - fastio.h pin mapping 26 #define BTN_EN2 26 //TX1 - fastio.h pin mapping 26
#define BTN_ENC 43 //A3 - fastio.h pin mapping 43 #define BTN_ENC 43 //A3 - fastio.h pin mapping 43

4
Marlin/pins_ULTIMAKER.h
Unescape View File

@ -55,9 +55,9 @@
#define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing. #define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing.
#define SERVO0_PIN 13 // untested #define SERVO0_PIN 13 // untested
#ifdef ULTRA_LCD #if ENABLED(ULTRA_LCD)
#ifdef NEWPANEL #if ENABLED(NEWPANEL)
//arduino pin witch triggers an piezzo beeper //arduino pin witch triggers an piezzo beeper
#define BEEPER 18 #define BEEPER 18

Write Preview
Loading…
Cancel
Save