forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Deprecate EXTRUDER_WATTS and BED_WATTS

Browse Source
master
Scott Lahteine 8 years ago
parent e1970b4b28
commit c31f56a38c
24 changed files with 5 additions and 108 deletions
Show Stats Download Patch File Download Diff File

4
Marlin/Configuration.h
Unescape View File

@ -263,10 +263,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

15
Marlin/Marlin_main.cpp
Unescape View File

@ -4488,31 +4488,16 @@ inline void gcode_M104() {
} }
#endif #endif
SERIAL_PROTOCOLPGM(" @:"); SERIAL_PROTOCOLPGM(" @:");
#ifdef EXTRUDER_WATTS
SERIAL_PROTOCOL(((EXTRUDER_WATTS) * thermalManager.getHeaterPower(target_extruder)) / 127);
SERIAL_PROTOCOLCHAR('W');
#else
SERIAL_PROTOCOL(thermalManager.getHeaterPower(target_extruder)); SERIAL_PROTOCOL(thermalManager.getHeaterPower(target_extruder));
#endif
#if HAS_TEMP_BED #if HAS_TEMP_BED
SERIAL_PROTOCOLPGM(" B@:"); SERIAL_PROTOCOLPGM(" B@:");
#ifdef BED_WATTS
SERIAL_PROTOCOL(((BED_WATTS) * thermalManager.getHeaterPower(-1)) / 127);
SERIAL_PROTOCOLCHAR('W');
#else
SERIAL_PROTOCOL(thermalManager.getHeaterPower(-1)); SERIAL_PROTOCOL(thermalManager.getHeaterPower(-1));
#endif #endif
#endif
#if HOTENDS > 1 #if HOTENDS > 1
HOTEND_LOOP() { HOTEND_LOOP() {
SERIAL_PROTOCOLPAIR(" @", e); SERIAL_PROTOCOLPAIR(" @", e);
SERIAL_PROTOCOLCHAR(':'); SERIAL_PROTOCOLCHAR(':');
#ifdef EXTRUDER_WATTS
SERIAL_PROTOCOL(((EXTRUDER_WATTS) * thermalManager.getHeaterPower(e)) / 127);
SERIAL_PROTOCOLCHAR('W');
#else
SERIAL_PROTOCOL(thermalManager.getHeaterPower(e)); SERIAL_PROTOCOL(thermalManager.getHeaterPower(e));
#endif
} }
#endif #endif
} }

4
Marlin/SanityCheck.h
Unescape View File

@ -698,8 +698,8 @@
#error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead." #error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead."
#elif defined(PID_PARAMS_PER_EXTRUDER) #elif defined(PID_PARAMS_PER_EXTRUDER)
#error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead." #error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead."
#elif defined(EXTRUDER_WATTS) #elif defined(EXTRUDER_WATTS) || defined(BED_WATTS)
#error "EXTRUDER_WATTS is deprecated. Use HOTEND_WATTS instead." #error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration."
#elif defined(SERVO_ENDSTOP_ANGLES) #elif defined(SERVO_ENDSTOP_ANGLES)
#error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead." #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
#elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR) #elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)

4
Marlin/example_configurations/Cartesio/Configuration.h
Unescape View File

@ -265,10 +265,6 @@
#define HEATER_3_MAXTEMP 415 #define HEATER_3_MAXTEMP 415
#define BED_MAXTEMP 165 #define BED_MAXTEMP 165
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/Felix/Configuration.h
Unescape View File

@ -264,10 +264,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/Felix/DUAL/Configuration.h
Unescape View File

@ -264,10 +264,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/Hephestos/Configuration.h
Unescape View File

@ -267,10 +267,6 @@
#define HEATER_3_MAXTEMP 260 #define HEATER_3_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/Hephestos_2/Configuration.h
Unescape View File

@ -263,10 +263,6 @@
//#define HEATER_3_MAXTEMP 275 //#define HEATER_3_MAXTEMP 275
//#define BED_MAXTEMP 150 //#define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/K8200/Configuration.h
Unescape View File

@ -271,10 +271,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/K8400/Configuration.h
Unescape View File

@ -264,10 +264,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/K8400/Dual-head/Configuration.h
Unescape View File

@ -264,10 +264,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
Unescape View File

@ -264,10 +264,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/RigidBot/Configuration.h
Unescape View File

@ -267,10 +267,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/SCARA/Configuration.h
Unescape View File

@ -289,10 +289,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
#define HOTEND_WATTS (2*2/5.9) // P=U^2/R
#define BED_WATTS (5.45*5.45/2.2) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/TAZ4/Configuration.h
Unescape View File

@ -264,10 +264,6 @@
#define HEATER_3_MAXTEMP 250 #define HEATER_3_MAXTEMP 250
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/WITBOX/Configuration.h
Unescape View File

@ -266,10 +266,6 @@
#define HEATER_3_MAXTEMP 260 #define HEATER_3_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/adafruit/ST7565/Configuration.h
Unescape View File

@ -264,10 +264,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/delta/biv2.5/Configuration.h
Unescape View File

@ -264,10 +264,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/delta/generic/Configuration.h
Unescape View File

@ -264,10 +264,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Unescape View File

@ -264,10 +264,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/delta/kossel_pro/Configuration.h
Unescape View File

@ -270,10 +270,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/delta/kossel_xl/Configuration.h
Unescape View File

@ -257,10 +257,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/makibox/Configuration.h
Unescape View File

@ -264,10 +264,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

4
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Unescape View File

@ -263,10 +263,6 @@
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
//#define HOTEND_WATTS (12.0*12.0/6.7) // P=U^2/R
//#define BED_WATTS (12.0*12.0/1.1) // P=U^2/R
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
//=========================================================================== //===========================================================================

Write Preview
Loading…
Cancel
Save