Configurable delay for BLTouch servo emulation

Marlin/Conditionals_LCD.h

@@ -345,6 +345,9 @@
     #undef DEACTIVATE_SERVOS_AFTER_MOVE
     #undef SERVO_DELAY
     #define SERVO_DELAY 50
+    #ifndef BLTOUCH_DELAY
+      #define BLTOUCH_DELAY 375
+    #endif
     #undef Z_SERVO_ANGLES
     #define Z_SERVO_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
 

Marlin/Configuration.h

@@ -559,6 +559,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/Marlin_main.cpp

@@ -1990,7 +1990,7 @@ static void clean_up_after_endstop_or_probe_move() {
   #if ENABLED(BLTOUCH)
     void bltouch_command(int angle) {
       servo[Z_ENDSTOP_SERVO_NR].move(angle);  // Give the BL-Touch the command and wait
-      safe_delay(375);
+      safe_delay(BLTOUCH_DELAY);
     }
 
     void set_bltouch_deployed(const bool deploy) {

Marlin/example_configurations/Cartesio/Configuration.h

@@ -559,6 +559,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/Felix/Configuration.h

@@ -542,6 +542,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -542,6 +542,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/Hephestos/Configuration.h

@@ -551,6 +551,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -553,6 +553,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/K8200/Configuration.h

@@ -588,6 +588,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/K8400/Configuration.h

@@ -559,6 +559,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/K8400/Dual-head/Configuration.h

@@ -559,6 +559,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -559,6 +559,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/RigidBot/Configuration.h

@@ -558,6 +558,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/SCARA/Configuration.h

@@ -574,6 +574,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/TAZ4/Configuration.h

@@ -580,6 +580,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/TinyBoy2/Configuration.h

@@ -605,6 +605,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/WITBOX/Configuration.h

@@ -551,6 +551,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -559,6 +559,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h

@@ -617,6 +617,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/delta/generic/Configuration.h

@@ -604,6 +604,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -604,6 +604,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -598,6 +598,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -617,6 +617,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/makibox/Configuration.h

@@ -562,6 +562,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -555,6 +555,7 @@
 // The BLTouch probe emulates a servo probe.
 // The default connector is SERVO 0. Set Z_ENDSTOP_SERVO_NR below to override.
 //#define BLTOUCH
+//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
 
 // Z Servo Probe, such as an endstop switch on a rotating arm.
 //#define Z_ENDSTOP_SERVO_NR 0