forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Disabled position display in Hibiscus UI (T1822)

Browse Source 
- Position display is now disabled as requested by marketing.
- Merged upstream Marlin changes to GUI code.
master
Marcio Teixeira 7 years ago
parent e8cbfacf47
commit c5973765e4
7 changed files with 163 additions and 133 deletions
Show Stats Download Patch File Download Diff File

10
Marlin/Conditionals_LulzBot.h
Unescape View File

@ -13,7 +13,7 @@
* got disabled.
*/
#define LULZBOT_FW_VERSION ".15" // Change this with each update
#define LULZBOT_FW_VERSION ".16" // Change this with each update
#if ( \
!defined(LULZBOT_Gladiola_Mini) && \
@ -119,7 +119,7 @@
#define LULZBOT_PRINTCOUNTER
#define LULZBOT_USE_32_MICROSTEPS_ON_Z
#define LULZBOT_UUID "e5502411-d46d-421d-ba3a-a20126d7930f"
#define LULZBOT_MODERN_UI
#define LULZBOT_LIGHTWEIGHT_UI
#define LULZBOT_USE_EXPERIMENTAL_FEATURES
#endif
@ -160,7 +160,7 @@
#define LULZBOT_BAUDRATE 250000
#define LULZBOT_PRINTCOUNTER
#define LULZBOT_UUID "a952577d-8722-483a-999d-acdc9e772b7b"
#define LULZBOT_MODERN_UI
#define LULZBOT_LIGHTWEIGHT_UI
#define LULZBOT_USE_EXPERIMENTAL_FEATURES
#endif
@ -1761,7 +1761,7 @@
#define LULZBOT_ENHANCED_TEMP_ERROR_MSG(msg, e) \
((e == -1) ? PSTR(LULZBOT_STRINGIFY(msg) " BED") : ((e == 0) ? PSTR(LULZBOT_STRINGIFY(msg) " E0") : PSTR(LULZBOT_STRINGIFY(msg) " E1")) )
#if defined(LULZBOT_MODERN_UI)
#if defined(LULZBOT_LIGHTWEIGHT_UI)
#define LULZBOT_ABOUT_TO_DRAW_SCREEN(a,b) \
lcd_in_status(a == b); \
if(a == b) { \
@ -1775,7 +1775,7 @@
#else
#define WELCOME_MSG _UxGT("TAZ 7 ready.")
#endif
#define LULZBOT_DELAY_TO_SHOW_POSITION 20
#define LULZBOT_STATUS_EXPIRE_SECONDS 0
#else
#define LULZBOT_ABOUT_TO_DRAW_SCREEN(a)
#endif

18
Marlin/Configuration_adv.h
Unescape View File

@ -643,6 +643,24 @@
// Swap the CW/CCW indicators in the graphics overlay
//#define OVERLAY_GFX_REVERSE
#if ENABLED(U8GLIB_ST7920)
/**
* ST7920-based LCDs can emulate a 16 x 4 character display using
* the ST7920 character-generator for very fast screen updates.
* Enable LIGHTWEIGHT_UI to use this special display mode.
*
* Since LIGHTWEIGHT_UI has limited space, the position and status
* message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
* length of time to display the status message before clearing.
*/
#if defined(LULZBOT_LIGHTWEIGHT_UI)
#define LIGHTWEIGHT_UI LULZBOT_LIGHTWEIGHT_UI
#endif
#if ENABLED(LIGHTWEIGHT_UI)
#define STATUS_EXPIRE_SECONDS LULZBOT_STATUS_EXPIRE_SECONDS
#endif
#endif
#endif // DOGLCD
// @section safety

253
Marlin/status_screen_lite_ST7920.h
Unescape View File

@ -360,18 +360,18 @@ const uint16_t fan2_icon[] PROGMEM = {
const uint16_t feedrate_icon[] PROGMEM = {
0b0000000000000000,
0b0111111000000000,
0b0100000000000000,
0b0100000000000000,
0b0100000000000000,
0b0110000000000000,
0b0110000000000000,
0b0110000000000000,
0b0111111011111000,
0b0100000010000100,
0b0100000010000100,
0b0100000010000100,
0b0100000011111000,
0b0000000010001000,
0b0000000010000100,
0b0000000010000100,
0b0000000010000010,
0b0110000011001100,
0b0110000011001100,
0b0110000011001100,
0b0110000011111000,
0b0000000011001100,
0b0000000011001100,
0b0000000011001100,
0b0000000011001100,
0b0000000000000000,
0b0000000000000000
};
@ -384,7 +384,7 @@ const uint16_t feedrate_icon[] PROGMEM = {
// i.e x is [1-16], while the y position is [1-4]
void ST7920_Lite_Status_Screen::draw_degree_symbol(uint8_t x, uint8_t y, bool draw) {
const uint8_t *p_bytes = degree_symbol;
if(y > 2) {
if (y > 2) {
// Handle display folding
y -= 2;
x += 16;
@ -399,12 +399,12 @@ void ST7920_Lite_Status_Screen::draw_degree_symbol(uint8_t x, uint8_t y, bool dr
uint8_t byte = pgm_read_byte_near(p_bytes++);
set_gdram_address(x_word,i+y*16);
begin_data();
if(draw) {
if (draw) {
write_byte(oddChar ? 0x00 : byte);
write_byte(oddChar ? byte : 0x00);
} else {
write_word(0x0000);
}
else
write_word(0x0000);
}
}
@ -442,15 +442,15 @@ void ST7920_Lite_Status_Screen::draw_static_elements() {
void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) {
#if EXTRUDERS == 1
// If we have only one extruder, draw a long progress bar on the third line
const int top = 1; // Top in pixels
const int bottom = 13; // Bottom in pixels
const int left = 12; // Left edge, in 16-bit words
const int width = 4; // Width of progress bar, in 16-bit words
const uint8_t top = 1, // Top in pixels
bottom = 13, // Bottom in pixels
left = 12, // Left edge, in 16-bit words
width = 4; // Width of progress bar, in 16-bit words
#else
const uint8_t top = 16 + 1, // Top in pixels
bottom = 16 + 13, // Bottom in pixels
left = 5, // Left edge, in 16-bit words
width = 3; // Width of progress bar, in 16-bit words
const uint8_t top = 16 + 1,
bottom = 16 + 13,
left = 5,
width = 3;
#endif
const uint8_t char_pcnt = 100 / width; // How many percent does each 16-bit word represent?
@ -477,7 +477,6 @@ void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) {
}
// Draw the percentage as text in DDRAM
#if EXTRUDERS == 1
set_ddram_address(DDRAM_LINE_3 + 4);
begin_data();
@ -487,6 +486,7 @@ void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) {
begin_data();
#endif
// Draw centered
if (value > 9) {
write_number(value, 4);
write_str(F("% "));
@ -525,11 +525,18 @@ void ST7920_Lite_Status_Screen::draw_heat_icon(const bool whichIcon, const bool
static struct {
bool E1_show_target : 1;
bool E2_show_target : 1;
bool bed_show_target : 1;
} display_state = {true, true, true};
#if HAS_HEATER_BED
bool bed_show_target : 1;
#endif
} display_state = {
true, true
#if HAS_HEATER_BED
, true
#endif
};
void ST7920_Lite_Status_Screen::draw_temps(uint8_t line, const int16_t temp, const int16_t target, bool showTarget, bool targetStateChange) {
switch(line) {
switch (line) {
case 1: set_ddram_address(DDRAM_LINE_1 + 1); break;
case 2: set_ddram_address(DDRAM_LINE_2 + 1); break;
case 3: set_ddram_address(DDRAM_LINE_3 + 1); break;
@ -543,45 +550,37 @@ void ST7920_Lite_Status_Screen::draw_temps(uint8_t line, const int16_t temp, con
write_number(target);
};
if(targetStateChange) {
if(showTarget) {
draw_degree_symbol(6, line, false);
draw_degree_symbol(10, line, true);
} else {
write_str(F(" "));
draw_degree_symbol(6, line, true);
draw_degree_symbol(10, line, false);
}
if (targetStateChange) {
if (!showTarget) write_str(F(" "));
draw_degree_symbol(6, line, !showTarget);
draw_degree_symbol(10, line, showTarget);
}
}
void ST7920_Lite_Status_Screen::draw_extruder_1_temp(const int16_t temp, const int16_t target, bool forceUpdate) {
const bool show_target = target && FAR(temp, target);
draw_temps(1, temp, target, show_target, display_state.E1_show_target != show_target || forceUpdate);
display_state.E1_show_target = show_target;
}
void ST7920_Lite_Status_Screen::draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate) {
const bool show_target = target && FAR(temp, target);
draw_temps(2, temp, target, show_target, display_state.E2_show_target != show_target || forceUpdate);
display_state.E2_show_target = show_target;
}
void ST7920_Lite_Status_Screen::draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate) {
const bool show_target = target && FAR(temp, target);
draw_temps(
#if EXTRUDERS == 1
2,
#else
3,
#endif
temp, target, show_target, display_state.bed_show_target != show_target || forceUpdate);
display_state.bed_show_target = show_target;
}
#if HAS_HEATER_BED
void ST7920_Lite_Status_Screen::draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate) {
const bool show_target = target && FAR(temp, target);
draw_temps(2
#if EXTRUDERS > 1
+ 1
#endif
, temp, target, show_target, display_state.bed_show_target != show_target || forceUpdate
);
display_state.bed_show_target = show_target;
}
#endif
void ST7920_Lite_Status_Screen::draw_fan_speed(const uint8_t value) {
set_ddram_address(DDRAM_LINE_1 + 6);
@ -590,19 +589,16 @@ void ST7920_Lite_Status_Screen::draw_fan_speed(const uint8_t value) {
write_byte('%');
}
void ST7920_Lite_Status_Screen::draw_print_time(const uint32_t elapsed) {
const uint8_t hrs = elapsed / 3600,
min = (elapsed / 60) % 60;
char str[7];
sprintf_P(str, hrs > 99 ? PSTR("%03d:%02d") : PSTR("%02d:%02d "), hrs, min);
void ST7920_Lite_Status_Screen::draw_print_time(const duration_t &elapsed) {
#if EXTRUDERS == 1
set_ddram_address(DDRAM_LINE_3);
#else
set_ddram_address(DDRAM_LINE_3 + 5);
#endif
char str[7];
str[elapsed.toDigital(str)] = ' ';
begin_data();
write_str(str);
write_str(str, 6);
}
void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint8_t percentage) {
@ -680,26 +676,23 @@ bool ST7920_Lite_Status_Screen::indicators_changed() {
const bool blink = lcd_blink();
const uint8_t feedrate_perc = feedrate_percentage;
const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256;
const float extruder_1_target = thermalManager.degTargetHotend(0);
const int16_t extruder_1_target = thermalManager.degTargetHotend(0);
#if EXTRUDERS == 2
const float extruder_2_target = thermalManager.degTargetHotend(1);
const int16_t extruder_2_target = thermalManager.degTargetHotend(1);
#endif
const float bed_target = thermalManager.degTargetBed();
static uint8_t last_checksum = 0;
const uint8_t checksum =
uint8_t(blink) ^
uint8_t(feedrate_perc) ^
uint8_t(fan_speed) ^
uint8_t(extruder_1_target) ^
#if HAS_HEATER_BED
const int16_t bed_target = thermalManager.degTargetBed();
#endif
static uint16_t last_checksum = 0;
const uint16_t checksum = blink ^ feedrate_perc ^ fan_speed ^ extruder_1_target
#if EXTRUDERS == 2
uint8_t(extruder_2_target) ^
^ extruder_2_target
#endif
uint8_t(bed_target);
#if HAS_HEATER_BED
^ bed_target
#endif
;
if (last_checksum == checksum) return false;
last_checksum = checksum;
return true;
}
@ -708,33 +701,38 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) {
if (forceUpdate || indicators_changed()) {
const bool blink = lcd_blink();
const duration_t elapsed = print_job_timer.duration();
const uint32_t seconds_elapsed = elapsed.value;
const uint8_t feedrate_perc = feedrate_percentage;
const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256;
const float extruder_1_temp = thermalManager.degHotend(0);
const float extruder_1_target = thermalManager.degTargetHotend(0);
const int16_t extruder_1_temp = thermalManager.degHotend(0),
extruder_1_target = thermalManager.degTargetHotend(0);
#if EXTRUDERS == 2
const float extruder_2_temp = thermalManager.degHotend(1);
const float extruder_2_target = thermalManager.degTargetHotend(1);
const int16_t extruder_2_temp = thermalManager.degHotend(1),
extruder_2_target = thermalManager.degTargetHotend(1);
#endif
#if HAS_HEATER_BED
const int16_t bed_temp = thermalManager.degBed(),
bed_target = thermalManager.degTargetBed();
#endif
const float bed_temp = thermalManager.degBed();
const float bed_target = thermalManager.degTargetBed();
draw_extruder_1_temp(extruder_1_temp, extruder_1_target, forceUpdate);
#if EXTRUDERS == 2
draw_extruder_2_temp(extruder_2_temp, extruder_2_target, forceUpdate);
#endif
draw_bed_temp(bed_temp, bed_target, forceUpdate);
#if HAS_HEATER_BED
draw_bed_temp(bed_temp, bed_target, forceUpdate);
#endif
draw_fan_speed(fan_speed);
draw_print_time(seconds_elapsed);
draw_print_time(elapsed);
draw_feedrate_percentage(feedrate_perc);
// Update the fan and bed animations
if (fan_speed > 0) draw_fan_icon(blink);
if (bed_target > 0)
draw_heat_icon(blink, true);
else
draw_heat_icon(false, false);
#if HAS_HEATER_BED
if (bed_target > 0)
draw_heat_icon(blink, true);
else
draw_heat_icon(false, false);
#endif
}
}
@ -753,7 +751,6 @@ bool ST7920_Lite_Status_Screen::position_changed() {
bool ST7920_Lite_Status_Screen::status_changed() {
uint8_t checksum = 0;
for (const char *p = lcd_status_message; *p; p++) checksum ^= *p;
static uint8_t last_checksum = 0;
if (last_checksum == checksum) return false;
last_checksum = checksum;
@ -769,7 +766,12 @@ bool ST7920_Lite_Status_Screen::blink_changed() {
}
void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) {
static uint8_t countdown = 0;
#ifndef STATUS_EXPIRE_SECONDS
#define STATUS_EXPIRE_SECONDS 20
#endif
#if STATUS_EXPIRE_SECONDS != 0
static uint8_t countdown = 0;
#endif
/**
* There is only enough room in the display for either the
@ -782,51 +784,61 @@ void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) {
* countdown > 1 -- Show status
* countdown = 1 -- Show status, until movement
* countdown = 0 -- Show position
*
* If STATUS_EXPIRE_SECONDS is zero, then the position
* display will be disabled and only the status will be
* shown.
*/
if (forceUpdate || status_changed()) {
#if ENABLED(STATUS_MESSAGE_SCROLLING)
status_scroll_pos = 0;
#endif
#ifndef STATUS_EXPIRE_SECONDS
#define STATUS_EXPIRE_SECONDS 20
#if STATUS_EXPIRE_SECONDS != 0
countdown = lcd_strlen(lcd_status_message) ? STATUS_EXPIRE_SECONDS : 0;
#endif
countdown = lcd_strlen(lcd_status_message) ? STATUS_EXPIRE_SECONDS : 0;
draw_status_message(lcd_status_message);
blink_changed(); // Clear changed flag
}
else if (countdown > 1 && blink_changed()) {
countdown--;
#if STATUS_EXPIRE_SECONDS == 0
#if ENABLED(STATUS_MESSAGE_SCROLLING)
draw_status_message(lcd_status_message);
else
draw_status_message(lcd_status_message);
#endif
}
else if (countdown > 0 && blink_changed()) {
if (position_changed()) {
#else
else if (countdown > 1 && blink_changed()) {
countdown--;
forceUpdate = true;
#if ENABLED(STATUS_MESSAGE_SCROLLING)
draw_status_message(lcd_status_message);
#endif
}
#if ENABLED(STATUS_MESSAGE_SCROLLING)
draw_status_message(lcd_status_message);
#endif
}
if (countdown == 0 && (forceUpdate || position_changed() ||
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
blink_changed()
#endif
)) {
draw_position(
current_position[X_AXIS],
current_position[Y_AXIS],
current_position[Z_AXIS],
#if ENABLED(DISABLE_REDUCED_ACCURACY_WARNING)
true
#else
axis_known_position[X_AXIS] &&
axis_known_position[Y_AXIS] &&
axis_known_position[Z_AXIS]
else if (countdown > 0 && blink_changed()) {
if (position_changed()) {
countdown--;
forceUpdate = true;
}
#if ENABLED(STATUS_MESSAGE_SCROLLING)
draw_status_message(lcd_status_message);
#endif
);
}
}
if (countdown == 0 && (forceUpdate || position_changed() ||
#if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING)
blink_changed()
#endif
)) {
draw_position(
current_position[X_AXIS],
current_position[Y_AXIS],
current_position[Z_AXIS],
#if ENABLED(DISABLE_REDUCED_ACCURACY_WARNING)
true
#else
axis_known_position[X_AXIS] &&
axis_known_position[Y_AXIS] &&
axis_known_position[Z_AXIS]
#endif
);
}
#endif
}
void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) {
@ -836,8 +848,7 @@ void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) {
// Set current percentage from SD when actively printing
#if ENABLED(SDSUPPORT)
if (IS_SD_PRINTING)
progress_bar_percent = card.percentDone();
if (IS_SD_PRINTING) progress_bar_percent = card.percentDone();
#endif
// Since the progress bar involves writing

3
Marlin/status_screen_lite_ST7920_class.h
Unescape View File

@ -18,6 +18,7 @@
#define STATUS_SCREEN_LITE_ST7920_CLASS_H
#include "macros.h"
#include "duration_t.h"
typedef const __FlashStringHelper *progmem_str;
@ -85,7 +86,7 @@ class ST7920_Lite_Status_Screen {
static void draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate = false);
static void draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate = false);
static void draw_fan_speed(const uint8_t value);
static void draw_print_time(const uint32_t elapsed);
static void draw_print_time(const duration_t &elapsed);
static void draw_feedrate_percentage(const uint8_t percentage);
static void draw_status_message(const char *str);
static void draw_position(const float x, const float y, const float z, bool position_known = true);

2
Marlin/ultralcd.cpp
Unescape View File

@ -4969,7 +4969,7 @@ void lcd_update() {
#endif
#if ENABLED(DOGLCD)
#if defined(LULZBOT_MODERN_UI)
#if defined(LULZBOT_LIGHTWEIGHT_UI)
LULZBOT_ABOUT_TO_DRAW_SCREEN(currentScreen, lcd_status_screen)
#endif
if (!drawing_screen) { // If not already drawing pages

8
Marlin/ultralcd_impl_DOGM.h
Unescape View File

@ -44,7 +44,7 @@
*/
#include "ultralcd.h"
#if ENABLED(LULZBOT_MODERN_UI)
#if ENABLED(LULZBOT_LIGHTWEIGHT_UI)
typedef const __FlashStringHelper *progmem_str;
#include "status_screen_lite_ST7920.h"
#endif
@ -370,7 +370,7 @@ static void lcd_implementation_init() {
// The kill screen is displayed for unrecoverable conditions
void lcd_kill_screen() {
#if ENABLED(LULZBOT_MODERN_UI)
#if ENABLED(LULZBOT_LIGHTWEIGHT_UI)
ST7920_Lite_Status_Screen::clear_text_buffer();
#endif
u8g.firstPage();
@ -495,7 +495,7 @@ inline void lcd_implementation_status_message(const bool blink) {
//#define DOGM_SD_PERCENT
#if !defined(LULZBOT_MODERN_UI)
#if !defined(LULZBOT_LIGHTWEIGHT_UI)
static void lcd_implementation_status_screen() {
const bool blink = lcd_blink();
@ -769,7 +769,7 @@ static void lcd_implementation_status_screen() {
#endif
}
}
#endif // LULZBOT_MODERN_UI
#endif // LULZBOT_LIGHTWEIGHT_UI
#if ENABLED(ULTIPANEL)

2
Marlin/ultralcd_st7920_u8glib_rrd.h
Unescape View File

@ -190,7 +190,7 @@ class U8GLIB_ST7920_128X64_RRD : public U8GLIB {
U8GLIB_ST7920_128X64_RRD(uint8_t dummy) : U8GLIB(&u8g_dev_st7920_128x64_rrd_sw_spi) { UNUSED(dummy); }
};
#if ENABLED(LULZBOT_MODERN_UI)
#if ENABLED(LULZBOT_LIGHTWEIGHT_UI)
typedef const __FlashStringHelper *progmem_str;
// We have to include the code for the lightweight UI here

Write Preview
Loading…
Cancel
Save