Fixes to 1.1.8 merge.

Marlin/Conditionals_LulzBot.h

@@ -13,7 +13,7 @@
  * got disabled.
  */
 
-#define LULZBOT_FW_VERSION ".75" // Change this with each update
+#define LULZBOT_FW_VERSION ".1" // Change this with each update
 
 #if ( \
     !defined(LULZBOT_Gladiola_Mini) && \
@@ -177,9 +177,6 @@
   Running = true; \
   lcd_reset_alert_level();
 
-// Fix for auto0.g, which is broken
-#define LULZBOT_AUTOSTART_BUGFIX
-
 // Q&A wants to be able to use M226 on endstops switches
 #define LULZBOT_NO_PIN_PROTECTION_ON_M226
 
@@ -190,17 +187,10 @@
     #define LULZBOT_G28_DISABLES_LEVELING_WORKAROUND
 #endif
 
-// Marlin 1.1.5 does not respect Z_HOMING_HEIGHT on the Mini. This has
-// been reported upstream as bug #8669
-#define LULZBOT_Z_HOMING_HEIGHT_WORKAROUND
-
 // Marlin 1.1.5 does not respect ENDSTOPS_ALWAYS_ON_DEFAULT at startup,
 // as described in T1393
 #define LULZBOT_ENDSTOPS_ALWAYS_ON_DEFAULT_WORKAROUND
 
-// Backport of upstream Marlin fix T7811 related to M600 resume_print
-#define LULZBOT_M600_BACKPORT_T7811
-
 // In Marlin 1.1.5, a paused print cannot be resumed from the LCD if
 // PAUSE_PARK_RETRACT_LENGTH is non-zero. This has been submitted as
 // bug #8703
@@ -212,11 +202,6 @@
 //      Back port of upstream https://github.com/MarlinFirmware/Marlin/commit/6ed284061580ffc6eef40df391afb30d2f8b45f5
 #define LULZBOT_OCTOPRINT_RX_BUFFER_OVERFLOW_WORKAROUND delay(2);
 
-/* In Marlin, the custom boot screen is incorrectly being drawn during
- * lcd_implementation_init, this causes the boot screen to flash
- * before entering menus, and also screws up the new modern UI */
-#define LULZBOT_CUSTOM_BOOTSCREEN_DURING_INIT_WORKAROUND
-
 /************************* EXPERIMENTAL FEATURES ******************************/
 
 #if defined(LULZBOT_USE_EXPERIMENTAL_FEATURES)
@@ -442,6 +427,19 @@
   #endif
 #endif
 
+/* Make sure Marlin allows probe points outside of the bed area */
+#if defined(LULZBOT_USE_AUTOLEVELING)
+  #if LULZBOT_Z_SAFE_HOMING_X_POINT < LULZBOT_LEFT_PROBE_BED_POSITION
+    #define MIN_PROBE_X LULZBOT_Z_SAFE_HOMING_X_POINT
+  #else
+    #define MIN_PROBE_X LULZBOT_LEFT_PROBE_BED_POSITION
+  #endif
+  #define MAX_PROBE_X LULZBOT_RIGHT_PROBE_BED_POSITION
+
+  #define MIN_PROBE_Y LULZBOT_FRONT_PROBE_BED_POSITION
+  #define MAX_PROBE_Y LULZBOT_BACK_PROBE_BED_POSITION
+#endif
+
 /* Auto-leveling was introduced on the Mini and TAZ 6.
  * Define probe parameters related to bed leveling,
  * e.g. the washers on the bed. These are confusingly
@@ -450,10 +448,9 @@
  */
 #if defined(LULZBOT_USE_AUTOLEVELING)
     #define LULZBOT_FIX_MOUNTED_PROBE
-    #define LULZBOT_PROBE_POINTS_OUTSIDE_OF_BED
 #endif // LULZBOT_USE_AUTOLEVELING
 
-#define LULZBOT_PROBE_DOUBLE_TOUCH
+#define LULZBOT_MULTIPLE_PROBING              2
 #define LULZBOT_X_PROBE_OFFSET_FROM_EXTRUDER  0
 #define LULZBOT_Y_PROBE_OFFSET_FROM_EXTRUDER  0
 #define LULZBOT_Z_PROBE_OFFSET_RANGE_MIN      -2
@@ -1440,7 +1437,7 @@
         /* Always use COOLSTEP on E0 */ \
         LULZBOT_ENABLE_COOLSTEP_WITH_STALLGUARD(stepperE0); \
 
-    #define LULZBOT_TMC2130_ADV { \
+    #define LULZBOT_TMC_ADV { \
             LULZBOT_MOTOR_INIT_XY \
             LULZBOT_MOTOR_INIT_Z \
             LULZBOT_MOTOR_INIT_E \
@@ -1819,7 +1816,6 @@
     #define LULZBOT_HIDE_ACTIVE_NOZZLE_IN_LCD
     #define LULZBOT_HIDE_PID_CONFIG_IN_LCD
     #define LULZBOT_HIDE_EXTRA_FAN_CONFIG_IN_LCD
-    #define LULZBOT_SCROLL_LONG_FILE_NAMES
     #define LULZBOT_REORDERED_MENUS
     #define LULZBOT_ESTEP_REDUCED_LCD_PRECISION
     #if LULZBOT_EXTRUDERS > 1

Marlin/Conditionals_post.h

@@ -1080,11 +1080,6 @@
     #define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT
   #endif
 
-      #define MIN_PROBE_X (X_MIN_POS)
-      #define MIN_PROBE_Y (Y_MIN_POS)
-      #define MAX_PROBE_X (X_MAX_POS)
-      #define MAX_PROBE_Y (Y_MAX_POS)
-    #elif ENABLED(BED_CENTER_AT_0_0)
   // Stepper pulse duration, in cycles
   #define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND)
 

Marlin/Configuration.h

@@ -727,7 +727,7 @@
 // The number of probes to perform at each point.
 //   Set to 2 for a fast/slow probe, using the second probe result.
 //   Set to 3 or more for slow probes, averaging the results.
-//#define MULTIPLE_PROBING 2
+#define MULTIPLE_PROBING LULZBOT_MULTIPLE_PROBING
 
 /**
  * Z probes require clearance when deploying, stowing, and moving between
@@ -1074,7 +1074,7 @@
 
 #if ENABLED(Z_SAFE_HOMING)
   #define Z_SAFE_HOMING_X_POINT LULZBOT_Z_SAFE_HOMING_X_POINT    // X point for Z homing when homing all axes (G28).
-  #define Z_SAFE_HOMING_Y_POINT LULZBOT_Z_SAFE_HOMING_X_POINT    // Y point for Z homing when homing all axes (G28).
+  #define Z_SAFE_HOMING_Y_POINT LULZBOT_Z_SAFE_HOMING_Y_POINT    // Y point for Z homing when homing all axes (G28).
 #endif
 
 // Homing speeds (mm/m)

Marlin/Configuration_adv.h

@@ -358,9 +358,7 @@
 #define Z_HOME_BUMP_MM LULZBOT_Z_HOME_BUMP_MM
 #define HOMING_BUMP_DIVISOR { 2, 2, 4 }  // Re-Bump Speed Divisor (Divides the Homing Feedrate)
 #if defined(LULZBOT_QUICKHOME)
-#define QUICK_HOME                     // If homing includes X and Y, do a diagonal move initially
+#define QUICK_HOME LULZBOT_QUICKHOME   // If homing includes X and Y, do a diagonal move initially
-#endif
-#define QUICK_HOME LULZBOT_QUICKHOME  //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
 #endif
 
 // When G28 is called, this option will make Y home before X
@@ -1170,7 +1168,7 @@
    *   stepperY.interpolate(0); \
    * }
    */
-  #define  TMC_ADV() LULZBOT_TMC2130_ADV
+  #define  TMC_ADV() LULZBOT_TMC_ADV
 
 #endif // TMC2130 || TMC2208
 

Marlin/Marlin_main.cpp

@@ -2342,13 +2342,14 @@ static void clean_up_after_endstop_or_probe_move() {
 
     #if defined(LULZBOT_Z_CLEARANCE_DEPLOY_PROBE_WORKAROUND)
     do_probe_raise(_Z_CLEARANCE_DEPLOY_PROBE);
-    #endif
 
+    // Move the probe to the given XY
+    do_blocking_move_to_xy(nx, ny);
+    #else
     // Move the probe to the starting XYZ
     do_blocking_move_to(nx, ny, nz);
     #endif
 
-
     float measured_z = NAN;
     if (!DEPLOY_PROBE()) {
       measured_z = run_z_probe() + zprobe_zoffset;
@@ -2972,7 +2973,7 @@ static void homeaxis(const AxisEnum axis) {
       if (axis == Y_AXIS) tmc_sensorless_homing(stepperY);
     #endif
     #if ENABLED(Z_IS_TMC2130) && defined(LULZBOT_SENSORLESS_HOMING_Z)
-      if (axis == Z_AXIS) tmc2130_sensorless_homing(stepperZ);
+      if (axis == Z_AXIS) tmc_sensorless_homing(stepperZ);
       if (axis == Z_AXIS) LULZBOT_ADJUST_Z_HOMING_CURRENT(true);
     #endif
   #endif
@@ -3086,7 +3087,7 @@ static void homeaxis(const AxisEnum axis) {
       if (axis == Y_AXIS) tmc_sensorless_homing(stepperY, false);
     #endif
     #if ENABLED(Z_IS_TMC2130) && defined(LULZBOT_SENSORLESS_HOMING_Z)
-      if (axis == Z_AXIS) tmc2130_sensorless_homing(stepperZ, false);
+      if (axis == Z_AXIS) tmc_sensorless_homing(stepperZ, false);
       if (axis == Z_AXIS) LULZBOT_ADJUST_Z_HOMING_CURRENT(false);
     #endif
   #endif
@@ -4063,7 +4064,6 @@ inline void gcode_G28(const bool always_home_all) {
 
     #endif
 
-    #if defined(LULZBOT_Z_HOMING_HEIGHT_WORKAROUND)
     if (home_all || homeX || homeY) {
       // Raise Z before homing any other axes and z is not already high enough (never lower z)
       destination[Z_AXIS] = Z_HOMING_HEIGHT;
@@ -6233,7 +6233,7 @@ inline void gcode_G92() {
   #endif
 
   bool didE = false;
-  #if IS_SCARA || !HAS_POSITION_SHIFT
+  #if IS_SCARA || !HAS_POSITION_SHIFT || defined(LULZBOT_G92_BACKWARDS_COMPATIBILITY)
     bool didXYZ = false;
   #else
     constexpr bool didXYZ = false;
@@ -6245,7 +6245,7 @@ inline void gcode_G92() {
                   v = i == E_AXIS ? l : LOGICAL_TO_NATIVE(l, i),
                   d = v - current_position[i];
       if (!NEAR_ZERO(d)) {
-        #if IS_SCARA || !HAS_POSITION_SHIFT
+        #if IS_SCARA || !HAS_POSITION_SHIFT || defined(LULZBOT_G92_BACKWARDS_COMPATIBILITY)
           if (i == E_AXIS) didE = true; else didXYZ = true;
           current_position[i] = v;        // Without workspaces revert to Marlin 1.0 behavior
         #elif HAS_POSITION_SHIFT
@@ -6684,8 +6684,6 @@ inline void gcode_M17() {
 
     set_destination_from_current();
 
-    #endif
-
     if (load_length != 0) {
       #if ENABLED(ULTIPANEL)
         // Show "insert filament"
@@ -7657,7 +7655,6 @@ inline void gcode_M104() {
   #endif
 }
 
-    LULZBOT_OCTOPRINT_RX_BUFFER_OVERFLOW_WORKAROUND
 /**
  * M105: Read hot end and bed temperature
  */
@@ -10870,8 +10867,8 @@ inline void gcode_M502() {
         else tmc_get_sgt(stepperY2, extended_axis_codes[TMC_Y2]);
       #endif
       #if ENABLED(E0_IS_TMC2130)
-        if (parser.seen(axis_codes[E_AXIS])) tmc2130_set_sgt(stepperE0, 'E', parser.value_int());
+        if (parser.seen(axis_codes[E_AXIS])) tmc_set_sgt(stepperE0, extended_axis_codes[TMC_E0], parser.value_int());
-        else tmc2130_get_sgt(stepperE0, 'E');
+        else tmc_get_sgt(stepperE0, extended_axis_codes[TMC_E0]);
       #endif
     }
   #endif // SENSORLESS_HOMING
@@ -11791,6 +11788,7 @@ void process_parsed_command() {
         case 26: // G26: LulzBot clear probe fail
           LULZBOT_G26_RESET_ACTION;
           break;
+      #endif
 
       #if ENABLED(NOZZLE_PARK_FEATURE)
         case 27: // G27: Nozzle Park

Marlin/temperature.cpp

@@ -2225,6 +2225,7 @@ void Temperature::isr() {
       SERIAL_PROTOCOLPAIR(" (", r / OVERSAMPLENR);
       SERIAL_PROTOCOLCHAR(')');
     #endif
+    LULZBOT_OCTOPRINT_RX_BUFFER_OVERFLOW_WORKAROUND
   }
 
   extern uint8_t target_extruder;