Patch spacing in #3140

Marlin/example_configurations/Felix/Configuration.h

@@ -408,7 +408,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/Felix/Configuration_DUAL.h

@@ -405,7 +405,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/Hephestos/Configuration.h

@@ -418,7 +418,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -421,7 +421,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/K8200/Configuration.h

@@ -441,7 +441,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -426,7 +426,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/RigidBot/Configuration.h

@@ -420,7 +420,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/SCARA/Configuration.h

@@ -434,7 +434,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/TAZ4/Configuration.h

@@ -446,7 +446,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/WITBOX/Configuration.h

@@ -418,7 +418,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -448,7 +448,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -454,7 +454,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/makibox/Configuration.h

@@ -429,7 +429,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -416,7 +416,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
   #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.