Merge pull request #212 from elgambitero/Marlin_v1

Spanish language included in the language.h file

Marlin/language.h

@@ -5,10 +5,11 @@
 // 1  Custom (For you to add your own messages)
 // 2  English 
 // 3  French	(Waiting translation)
-// 4  German
+// 4  German	(Waiting translation)
-// 5  Etc
+// 5  Spanish
+// 6  Etc
 
-#define LANGUAGE_CHOICE 1  // Pick your language from the list above
+#define LANGUAGE_CHOICE 5  // Pick your language from the list above
 
 #define PROTOCOL_VERSION "1.0"
 
@@ -36,7 +37,6 @@
 	#define MSG_SET_ORIGIN " Set Origin"
 	#define MSG_COOLDOWN " Cooldown"
 	#define MSG_EXTRUDE " Extrude"
-    #define MSG_RETRACT" Retract"
 	#define MSG_PREHEAT_PLA " Preheat PLA"
 	#define MSG_PREHEAT_ABS " Preheat ABS"
 	#define MSG_MOVE_AXIS " Move Axis      \x7E"
@@ -87,8 +87,6 @@
 	#define MSG_CONTROL_ARROW " Control \x7E"
 	#define MSG_RETRACT_ARROW " Control \x7E"
 	#define MSG_TUNE " Tune    \x7E"
-    #define MSG_PAUSE_PRINT " Pause Print  \x7E"
-    #define MSG_RESUME_PRINT " Resume Print \x7E"
 	#define MSG_STOP_PRINT " Stop Print   \x7E"
 	#define MSG_CARD_MENU " Card Menu    \x7E"
 	#define MSG_NO_CARD " No Card"
@@ -99,6 +97,8 @@
 	#define MSG_PART_RELEASE "Partial Release"
 	#define MSG_KILLED "KILLED. "
 	#define MSG_STOPPED "STOPPED. "
+	#define MSG_PREHEAT_PLA " Preheat PLA"
+	#define MSG_PREHEAT_ABS " Preheat ABS"
 	#define MSG_STEPPER_RELEASED "Released."
   #define MSG_CONTROL_RETRACT  " Retract mm:"
   #define MSG_CONTROL_RETRACTF " Retract  F:"
@@ -177,25 +177,30 @@
 #if LANGUAGE_CHOICE == 4
 
 // LCD Menu Messages
-	#define WELCOME_MSG MACHINE_NAME " Bereit."
+
-	#define MSG_SD_INSERTED "Karte eingelegt"
+	#define WELCOME_MSG MACHINE_NAME " Ready."
-	#define MSG_SD_REMOVED "Karte entfernt"
+
-	#define MSG_MAIN " Haupt \003"
+	#define MSG_SD_INSERTED "Card inserted"
+	#define MSG_SD_REMOVED "Card removed"
+	#define MSG_MAIN " Main \003"
 	#define MSG_AUTOSTART " Autostart"
-	#define MSG_DISABLE_STEPPERS " Motoren abschalten"
+	#define MSG_DISABLE_STEPPERS " Stepper abschalten"
 	#define MSG_AUTO_HOME " Auto Heim"
 	#define MSG_SET_ORIGIN " Position setzen"
-	#define MSG_COOLDOWN " Abkuehlen"
-	#define MSG_EXTRUDE " Druck"
 	#define MSG_PREHEAT_PLA " Aufheizen PLA"
 	#define MSG_PREHEAT_ABS " Aufheizen ABS"
-	#define MSG_MOVE_AXIS " Achse bewegen   \x7E"
+	#define MSG_COOLDOWN " Abkuehlen"
+	#define MSG_EXTRUDE " Extrude"
+	#define MSG_PREHEAT_PLA " Preheat PLA"
+	#define MSG_PREHEAT_ABS " Preheat ABS"
+	#define MSG_MOVE_AXIS " Move Axis      \x7E"
+	#define MSG_MOVE_AXIS " Achsen verfahren   \x7E"
 	#define MSG_SPEED " Geschw:"
 	#define MSG_NOZZLE " \002Duese:"
 	#define MSG_NOZZLE1 " \002Duese2:"
 	#define MSG_NOZZLE2 " \002Duese3:"
 	#define MSG_BED " \002Bett:"
-	#define MSG_FAN_SPEED " Luefter Geschw.:"
+	#define MSG_FAN_SPEED " Luefter geschw.:"
 	#define MSG_FLOW " Fluss:"
 	#define MSG_CONTROL " Kontrolle \003"
 	#define MSG_MIN " \002 Min:"
@@ -218,42 +223,38 @@
 	#define MSG_VMIN " Vmin:"
 	#define MSG_VTRAV_MIN " VTrav min:"
 	#define MSG_AMAX " Amax "
-	#define MSG_A_RETRACT " A-Rueckzug:"
+	#define MSG_A_RETRACT " A-retract:"
 	#define MSG_XSTEPS " Xsteps/mm:"
 	#define MSG_YSTEPS " Ysteps/mm:"
 	#define MSG_ZSTEPS " Zsteps/mm:"
 	#define MSG_ESTEPS " Esteps/mm:"
-	#define MSG_MAIN_WIDE " Hauptmenue  \003"
+	#define MSG_MAIN_WIDE " Main        \003"
-	#define MSG_RECTRACT_WIDE " Rueckzug    \x7E"
 	#define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
-	#define MSG_MOTION_WIDE " Bewegung    \x7E"
+	#define MSG_MOTION_WIDE " Motion      \x7E"
 	#define MSG_STORE_EPROM " EPROM speichern"
 	#define MSG_LOAD_EPROM "  EPROM laden"
 	#define MSG_RESTORE_FAILSAFE " Standard Konfig."
-	#define MSG_REFRESH "\004Aktualisieren"
+	#define MSG_REFRESH "\004Refresh"
 	#define MSG_WATCH " Beobachten   \003"
-	#define MSG_PREPARE " Vorbereiten \x7E"
+	#define MSG_PREPARE " Prepare \x7E"
-	#define MSG_PREPARE_ALT " Vorbereiten \003"
+	#define MSG_PREPARE_ALT " Prepare \003"
-	#define MSG_CONTROL_ARROW " Kontrolle \x7E"
+	#define MSG_CONTROL_ARROW " Control \x7E"
-	#define MSG_RETRACT_ARROW " Control \x7E"
+	
 	#define MSG_TUNE " Tune    \x7E"
 	#define MSG_STOP_PRINT " Druck stoppen   \x7E"
 	#define MSG_CARD_MENU " SDKarten Menue    \x7E"
 	#define MSG_NO_CARD " Keine SDKarte"
 	#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der  Menuestruktur."
-	#define MSG_DWELL "verweilen..."
+	#define MSG_DWELL "DWELL..."		
-	#define MSG_USERWAIT "Warten auf Nutzer..."
+	#define MSG_NO_MOVE "No move."
-	#define MSG_NO_MOVE "Keine Bewegung."
+	#define MSG_PART_RELEASE "Partial Release"
-	#define MSG_PART_RELEASE "Teil loesen"
+	#define MSG_KILLED "KILLED. "
-	#define MSG_KILLED "GEKILLT. "
+	#define MSG_STOPPED "STOPPED. "
-	#define MSG_STOPPED "GESTOPPT. "
+	#define MSG_PREHEAT_PLA " Preheat PLA"
-	#define MSG_STEPPER_RELEASED "Freigegeben."
+	#define MSG_PREHEAT_ABS " Preheat ABS"
-	#define MSG_CONTROL_RETRACT  " Rueckzug mm:"
+	#define MSG_STEPPER_RELEASED "Released."
-	#define MSG_CONTROL_RETRACTF " Rueckzug  F:"
+	
-	#define MSG_CONTROL_RETRACT_ZLIFT " Z Sprung mm:"
+
-	#define MSG_CONTROL_RETRACT_RECOVER " Vorschub +mm:"
-	#define MSG_CONTROL_RETRACT_RECOVERF " Vorschub  F:"
-	#define MSG_AUTORETRACT " AutoRueckzug.:"
 
 // Serial Console Messages
 
@@ -300,26 +301,177 @@
 	#define MSG_Z_MIN "z_min:"
 	#define MSG_Z_MAX "z_max:"
 
-	#define MSG_SD_CANT_OPEN_SUBDIR "Verz. kein Zugriff"
+	#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
-	#define MSG_SD_INIT_FAIL "SD init Fehler"
+	#define MSG_SD_INIT_FAIL "SD init fail"
-	#define MSG_SD_VOL_INIT_FAIL "volume.init Fehler"
+	#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
-	#define MSG_SD_OPENROOT_FAIL "openRoot Fehler"
+	#define MSG_SD_OPENROOT_FAIL "openRoot failed"
-	#define MSG_SD_CARD_OK "SDKarte ok"
+	#define MSG_SD_CARD_OK "SD card ok"
-	#define MSG_SD_WORKDIR_FAIL "workDir Oeffnen Fehler"
+	#define MSG_SD_WORKDIR_FAIL "workDir open failed"
-	#define MSG_SD_OPEN_FILE_FAIL "Fehler: Oeffnen Datei: "
+	#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
-	#define MSG_SD_FILE_OPENED "Datei geoeffnet:"
+	#define MSG_SD_FILE_OPENED "File opened:"
-	#define MSG_SD_SIZE " Groesse:"
+	#define MSG_SD_SIZE " Size:"
-	#define MSG_SD_FILE_SELECTED "Datei selektiert"
+	#define MSG_SD_FILE_SELECTED "File selected"
-	#define MSG_SD_WRITE_TO_FILE "Schreibe in Datei: "
+	#define MSG_SD_WRITE_TO_FILE "Writing to file: "
-	#define MSG_SD_PRINTING_BYTE "SD druckt byte "
+	#define MSG_SD_PRINTING_BYTE "SD printing byte "
-	#define MSG_SD_NOT_PRINTING "Druckt nicht von SD"
+	#define MSG_SD_NOT_PRINTING "Not SD printing"
-	#define MSG_SD_ERR_WRITE_TO_FILE "Datei Schreibfehler"
+	#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
-	#define MSG_SD_CANT_ENTER_SUBDIR "Kann Verz. nicht wechseln:"
+	#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
+
+	#define MSG_STEPPER_TO_HIGH "Steprate to high : "
+	#define MSG_ENDSTOPS_HIT "endstops hit: "
+	#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+	#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
+
+#endif
+
+#if LANGUAGE_CHOICE == 5
+
+// LCD Menu Messages
+#define WELCOME_MSG MACHINE_NAME " Lista."
+#define MSG_SD_INSERTED "Tarjeta SD Colocada"
+#define MSG_SD_REMOVED "Tarjeta SD Retirada"
+#define MSG_MAIN " Menu Principal \003"
+#define MSG_AUTOSTART " Autostart"
+#define MSG_DISABLE_STEPPERS " Apagar Motores"
+#define MSG_AUTO_HOME " Llevar Ejes al Cero"
+#define MSG_SET_ORIGIN " Establecer Cero"
+#define MSG_COOLDOWN " Enfriar"
+#define MSG_EXTRUDE " Extruir"
+#define MSG_PREHEAT_PLA " Precalentar PLA"
+#define MSG_PREHEAT_ABS " Precalentar ABS"
+#define MSG_MOVE_AXIS " Mover Ejes      \x7E"
+#define MSG_SPEED " Velocidad:"
+#define MSG_NOZZLE " \002Nozzle:"
+#define MSG_NOZZLE1 " \002Nozzle2:"
+#define MSG_NOZZLE2 " \002Nozzle3:"
+#define MSG_BED " \002Bed:"
+#define MSG_FAN_SPEED " Ventilador:"
+#define MSG_FLOW " Flujo:"
+#define MSG_CONTROL " Control \003"
+#define MSG_MIN " \002 Min:"
+#define MSG_MAX " \002 Max:"
+#define MSG_FACTOR " \002 Fact:"
+#define MSG_AUTOTEMP " Autotemp:"
+#define MSG_ON "On "
+#define MSG_OFF "Off"
+#define MSG_PID_P " PID-P: "
+#define MSG_PID_I " PID-I: "
+#define MSG_PID_D " PID-D: "
+#define MSG_PID_C " PID-C: "
+#define MSG_ACC  " Acc:"
+#define MSG_VXY_JERK " Vxy-jerk: "
+#define MSG_VMAX " Vmax "
+#define MSG_X "x:"
+#define MSG_Y "y:"
+#define MSG_Z "z:"
+#define MSG_E "e:"
+#define MSG_VMIN " Vmin:"
+#define MSG_VTRAV_MIN " VTrav min:"
+#define MSG_AMAX " Amax "
+#define MSG_A_RETRACT " A-retrac.:"
+#define MSG_XSTEPS " Xpasos/mm:"
+#define MSG_YSTEPS " Ypasos/mm:"
+#define MSG_ZSTEPS " Zpasos/mm:"
+#define MSG_ESTEPS " Epasos/mm:"
+#define MSG_MAIN_WIDE " Menu Principal  \003"
+#define MSG_RECTRACT_WIDE " Retraer         \x7E"
+#define MSG_TEMPERATURE_WIDE " Temperatura     \x7E"
+#define MSG_MOTION_WIDE " Movimiento      \x7E"
+#define MSG_STORE_EPROM " Guardar Memoria"
+#define MSG_LOAD_EPROM " Cargar Memoria"
+#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
+#define MSG_REFRESH "\004Volver a cargar"
+#define MSG_WATCH " Monitorizar \003"
+#define MSG_PREPARE " Preparar \x7E"
+#define MSG_PREPARE_ALT " Preparar \003"
+#define MSG_CONTROL_ARROW " Control  \x7E"
+#define MSG_RETRACT_ARROW " Control  \x7E"
+#define MSG_TUNE " Ajustar \x7E"
+#define MSG_STOP_PRINT " Detener Impresion \x7E"
+#define MSG_CARD_MENU " Menu de SD    \x7E"
+#define MSG_NO_CARD " No hay Tarjeta SD"
+#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu"
+#define MSG_DWELL "Reposo..."
+#define MSG_USERWAIT "Esperando Ordenes..."
+#define MSG_NO_MOVE "Sin movimiento"
+#define MSG_PART_RELEASE "Desacople Parcial"
+#define MSG_KILLED "PARADA DE EMERGENCIA. "
+#define MSG_STOPPED "PARADA. "
+#define MSG_PREHEAT_PLA " Precalentar PLA"
+#define MSG_PREHEAT_ABS " Precalentar ABS"
+#define MSG_STEPPER_RELEASED "Desacoplada."
+#define MSG_CONTROL_RETRACT  " Retraer mm:"
+#define MSG_CONTROL_RETRACTF " Retraer  F:"
+#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
+#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
+#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
+#define MSG_AUTORETRACT " AutoRetr.:"
+
+// Serial Console Messages
+
+#define MSG_Enqueing "En cola \""
+#define MSG_POWERUP "PowerUp"
+#define MSG_EXTERNAL_RESET " Reset Externo"
+#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
+#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
+#define MSG_SOFTWARE_RESET " Reset por Software"
+#define MSG_MARLIN "Marlin "
+#define MSG_AUTHOR " | Autor: "
+#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
+#define MSG_FREE_MEMORY " Memoria libre: "
+#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+#define MSG_OK "ok"
+#define MSG_FILE_SAVED "Guardado."
+#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
+#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
+#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
+#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
+#define MSG_FILE_PRINTED "Impresion terminado"
+#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
+#define MSG_END_FILE_LIST "Fin de la lista de archivos"
+#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
+#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
+#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
+#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
+#define MSG_HEATING "Calientando..."
+#define MSG_HEATING_COMPLETE "Calentamiento terminado."
+#define MSG_BED_HEATING "Calentando la base."
+#define MSG_BED_DONE "Base Caliente."
+#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+#define MSG_COUNT_X " Cuenta X:"
+#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
+#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
+#define MSG_RESEND "Reenviar:"
+#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
+#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
+#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
+#define MSG_X_MIN "x_min:"
+#define MSG_X_MAX "x_max:"
+#define MSG_Y_MIN "y_min:"
+#define MSG_Y_MAX "y_max:"
+#define MSG_Z_MIN "z_min:"
+#define MSG_Z_MAX "z_max:"
+
+#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
+#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
+#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
+#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
+#define MSG_SD_CARD_OK "Tarjeta SD OK"
+#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
+#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
+#define MSG_SD_FILE_OPENED "Archivo abierto:"
+#define MSG_SD_SIZE " Tamaño:"
+#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
+#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
+#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
+#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
+#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
+#define MSG_SD_CANT_ENTER_SUBDIR "No se puede entrar en la carpeta:"
 
-	#define MSG_STEPPER_TO_HIGH "Steprate zu hoch : "
+#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
-	#define MSG_ENDSTOPS_HIT "Endstop erreicht: "
+#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
-	#define MSG_ERR_COLD_EXTRUDE_STOP " kalter Druck unterbunden"
+#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
-	#define MSG_ERR_LONG_EXTRUDE_STOP " langer Druckweg unterbunden"
+#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
 
 #endif
 #endif // ifndef LANGUAGE_H