forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #1343 from thinkyhead/dogm_progress_bar

Browse Source 
DOGLCD and LCD_PROGRESS_BAR to coexist
master
Steffen Vogel 10 years ago
parent 6e8e9bb41e 326b925557
commit d74394369b
4 changed files with 210 additions and 239 deletions
Show Stats Download Patch File Download Diff File

8
Marlin/Configuration_adv.h
Unescape View File

@ -297,7 +297,7 @@
// using: // using:
//#define MENU_ADDAUTOSTART //#define MENU_ADDAUTOSTART
// Show a progress bar on the LCD when printing from SD? // Show a progress bar on HD44780 LCDs for SD printing
//#define LCD_PROGRESS_BAR //#define LCD_PROGRESS_BAR
#ifdef LCD_PROGRESS_BAR #ifdef LCD_PROGRESS_BAR
@ -309,6 +309,12 @@
#define PROGRESS_MSG_EXPIRE 0 #define PROGRESS_MSG_EXPIRE 0
// Enable this to show messages for MSG_TIME then hide them // Enable this to show messages for MSG_TIME then hide them
//#define PROGRESS_MSG_ONCE //#define PROGRESS_MSG_ONCE
#ifdef DOGLCD
#warning LCD_PROGRESS_BAR does not apply to graphical displays at this time.
#endif
#ifdef FILAMENT_LCD_DISPLAY
#error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both.
#endif
#endif #endif
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation. // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

118
Marlin/dogm_lcd_implementation.h
Unescape View File

@ -11,9 +11,10 @@
* License: http://opensource.org/licenses/BSD-3-Clause * License: http://opensource.org/licenses/BSD-3-Clause
*/ */
#ifndef DOGM_LCD_IMPLEMENTATION_H
#define DOGM_LCD_IMPLEMENTATION_H
#ifndef ULTRA_LCD_IMPLEMENTATION_DOGM_H #define MARLIN_VERSION "1.0.2"
#define ULTRA_LCD_IMPLEMENTATION_DOGM_H
/** /**
* Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays. * Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
@ -85,17 +86,21 @@ U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
#endif #endif
static void lcd_implementation_init() static void lcd_implementation_init() {
{
#ifdef LCD_PIN_BL #ifdef LCD_PIN_BL
pinMode(LCD_PIN_BL, OUTPUT); // Enable LCD backlight pinMode(LCD_PIN_BL, OUTPUT); // Enable LCD backlight
digitalWrite(LCD_PIN_BL, HIGH); digitalWrite(LCD_PIN_BL, HIGH);
#endif #endif
u8g.setContrast(lcd_contrast); u8g.setContrast(lcd_contrast);
/*
// Uncomment this if you have the first generation (V1.10) of STBs board // Uncomment this if you have the first generation (V1.10) of STBs board
// pinMode(17, OUTPUT); // Enable LCD backlight
// digitalWrite(17, HIGH); pinMode(17, OUTPUT); // Enable LCD backlight
digitalWrite(17, HIGH);
//*/
u8g.firstPage(); u8g.firstPage();
do { do {
@ -105,55 +110,30 @@ static void lcd_implementation_init()
u8g.setColorIndex(1); u8g.setColorIndex(1);
} while( u8g.nextPage() ); } while( u8g.nextPage() );
#ifdef LCD_SCREEN_ROT_90 #if defined(LCD_SCREEN_ROT_90)
u8g.setRot90(); // Rotate screen by 90° u8g.setRot90(); // Rotate screen by 90°
#endif #elif defined(LCD_SCREEN_ROT_180)
#ifdef LCD_SCREEN_ROT_180
u8g.setRot180(); // Rotate screen by 180° u8g.setRot180(); // Rotate screen by 180°
#endif #elif defined(LCD_SCREEN_ROT_270)
#ifdef LCD_SCREEN_ROT_270
u8g.setRot270(); // Rotate screen by 270° u8g.setRot270(); // Rotate screen by 270°
#endif #endif
u8g.firstPage(); u8g.firstPage();
do { do {
// RepRap init bmp // RepRap init bmp
u8g.drawBitmapP(7,7,START_BMPBYTEWIDTH,START_BMPHEIGHT,start_bmp); u8g.drawBitmapP(7,7,START_BMPBYTEWIDTH,START_BMPHEIGHT,start_bmp);
// Welcome message // Welcome message
u8g.setFont(u8g_font_5x8); u8g.setFont(u8g_font_5x8);
u8g.drawStr(7,51,"V1.0.2 - marlin.reprap.org"); u8g.drawStr(7, 51, "V" MARLIN_VERSION " - marlin.reprap.org");
} while( u8g.nextPage() ); } while( u8g.nextPage() );
} }
static void lcd_implementation_clear() static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
{
// NO NEED TO IMPLEMENT LIKE SO. Picture loop automatically clears the display.
//
// Check this article: http://arduino.cc/forum/index.php?topic=91395.25;wap2
//
// u8g.firstPage();
// do {
// u8g.setColorIndex(0);
// u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
// u8g.setColorIndex(1);
// } while( u8g.nextPage() );
}
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */ /* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
static void lcd_printPGM(const char* str) static void lcd_printPGM(const char* str) {
{
char c; char c;
while((c = pgm_read_byte(str++)) != '\0') while ((c = pgm_read_byte(str++))) u8g.print(c);
{
u8g.print(c);
}
} }
static void _draw_heater_status(int x, int heater) { static void _draw_heater_status(int x, int heater) {
@ -176,8 +156,7 @@ static void _draw_heater_status(int x, int heater) {
} }
} }
static void lcd_implementation_status_screen() static void lcd_implementation_status_screen() {
{
static unsigned char fan_rot = 0; static unsigned char fan_rot = 0;
@ -192,30 +171,26 @@ static void lcd_implementation_status_screen()
u8g.drawBox(50,44,2,5); u8g.drawBox(50,44,2,5);
u8g.drawFrame(42,49,10,4); u8g.drawFrame(42,49,10,4);
u8g.drawPixel(50,43); u8g.drawPixel(50,43);
// Progress bar
// Progress bar frame
u8g.drawFrame(54,49,73,4); u8g.drawFrame(54,49,73,4);
// SD Card Progress bar and clock // SD Card Progress bar and clock
u8g.setFont(FONT_STATUSMENU); u8g.setFont(FONT_STATUSMENU);
if (IS_SD_PRINTING) if (IS_SD_PRINTING) {
{ // Progress bar solid part
// Progress bar u8g.drawBox(55, 50, (unsigned int)(71.f * card.percentDone() / 100.f), 2);
u8g.drawBox(55,50, (unsigned int)( (71 * card.percentDone())/100) ,2);
}
else {
// do nothing
} }
u8g.setPrintPos(80,47); u8g.setPrintPos(80,47);
if(starttime != 0) if (starttime != 0) {
{
uint16_t time = millis()/60000 - starttime/60000; uint16_t time = millis()/60000 - starttime/60000;
u8g.print(itostr2(time/60)); u8g.print(itostr2(time/60));
u8g.print(':'); u8g.print(':');
u8g.print(itostr2(time%60)); u8g.print(itostr2(time%60));
}else{ }
else {
lcd_printPGM(PSTR("--:--")); lcd_printPGM(PSTR("--:--"));
} }
#endif #endif
@ -242,7 +217,6 @@ static void lcd_implementation_status_screen()
u8g.print("---"); u8g.print("---");
#endif #endif
// X, Y, Z-Coordinates // X, Y, Z-Coordinates
u8g.setFont(FONT_STATUSMENU); u8g.setFont(FONT_STATUSMENU);
u8g.drawBox(0,29,128,10); u8g.drawBox(0,29,128,10);
@ -282,11 +256,10 @@ static void lcd_implementation_status_screen()
#ifndef FILAMENT_LCD_DISPLAY #ifndef FILAMENT_LCD_DISPLAY
u8g.print(lcd_status_message); u8g.print(lcd_status_message);
#else #else
if(message_millis+5000>millis()){ //Display both Status message line and Filament display on the last line if (millis() < message_millis + 5000) { //Display both Status message line and Filament display on the last line
u8g.print(lcd_status_message); u8g.print(lcd_status_message);
} }
else else {
{
lcd_printPGM(PSTR("dia:")); lcd_printPGM(PSTR("dia:"));
u8g.print(ftostr12ns(filament_width_meas)); u8g.print(ftostr12ns(filament_width_meas));
lcd_printPGM(PSTR(" factor:")); lcd_printPGM(PSTR(" factor:"));
@ -294,35 +267,31 @@ static void lcd_implementation_status_screen()
u8g.print('%'); u8g.print('%');
} }
#endif #endif
} }
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) {
{
char c; char c;
uint8_t n = LCD_WIDTH - 1 - 2; uint8_t n = LCD_WIDTH - 1 - 2;
if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] )) if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] )) {
{
u8g.setColorIndex(1); // black on white u8g.setColorIndex(1); // black on white
u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT); u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
u8g.setColorIndex(0); // following text must be white on black u8g.setColorIndex(0); // following text must be white on black
} else u8g.setColorIndex(1); // unmarked text is black on white }
else {
u8g.setColorIndex(1); // unmarked text is black on white
}
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT); u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
u8g.print(pre_char == '>' ? ' ' : pre_char); // Row selector is obsolete u8g.print(pre_char == '>' ? ' ' : pre_char); // Row selector is obsolete
while((c = pgm_read_byte(pstr))) {
while( (c = pgm_read_byte(pstr)) != '\0' )
{
u8g.print(c); u8g.print(c);
pstr++; pstr++;
n--; n--;
} }
while(n--){ while(n--) u8g.print(' ');
u8g.print(' ');
}
u8g.print(post_char); u8g.print(post_char);
u8g.print(' '); u8g.print(' ');
@ -391,8 +360,7 @@ static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char p
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) #define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
void lcd_implementation_drawedit(const char* pstr, char* value) void lcd_implementation_drawedit(const char* pstr, char* value) {
{
u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW ); u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
u8g.setFont(u8g_font_9x18); u8g.setFont(u8g_font_9x18);
lcd_printPGM(pstr); lcd_printPGM(pstr);
@ -445,13 +413,10 @@ static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, ch
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ') #define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ') #define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
static void lcd_implementation_quick_feedback() static void lcd_implementation_quick_feedback() {
{
#if BEEPER > -1 #if BEEPER > -1
SET_OUTPUT(BEEPER); SET_OUTPUT(BEEPER);
for(int8_t i=0;i<10;i++) for(int8_t i=0; i<10; i++) {
{
WRITE(BEEPER,HIGH); WRITE(BEEPER,HIGH);
delay(3); delay(3);
WRITE(BEEPER,LOW); WRITE(BEEPER,LOW);
@ -459,6 +424,5 @@ static void lcd_implementation_quick_feedback()
} }
#endif #endif
} }
#endif//ULTRA_LCD_IMPLEMENTATION_DOGM_H
#endif //__DOGM_LCD_IMPLEMENTATION_H

15
Marlin/ultralcd.cpp
Unescape View File

@ -195,7 +195,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
if (feedback) lcd_quick_feedback(); if (feedback) lcd_quick_feedback();
// For LCD_PROGRESS_BAR re-initialize the custom characters // For LCD_PROGRESS_BAR re-initialize the custom characters
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
lcd_set_custom_characters(menu == lcd_status_screen); lcd_set_custom_characters(menu == lcd_status_screen);
#endif #endif
} }
@ -204,7 +204,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
/* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */ /* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */
static void lcd_status_screen() static void lcd_status_screen()
{ {
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
uint16_t mil = millis(); uint16_t mil = millis();
#ifndef PROGRESS_MSG_ONCE #ifndef PROGRESS_MSG_ONCE
if (mil > progressBarTick + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) { if (mil > progressBarTick + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) {
@ -236,11 +236,12 @@ static void lcd_status_screen()
lcd_status_update_delay--; lcd_status_update_delay--;
else else
lcdDrawUpdate = 1; lcdDrawUpdate = 1;
if (lcdDrawUpdate)
{ if (lcdDrawUpdate) {
lcd_implementation_status_screen(); lcd_implementation_status_screen();
lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */ lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
} }
#ifdef ULTIPANEL #ifdef ULTIPANEL
bool current_click = LCD_CLICKED; bool current_click = LCD_CLICKED;
@ -265,7 +266,7 @@ static void lcd_status_screen()
{ {
lcd_goto_menu(lcd_main_menu); lcd_goto_menu(lcd_main_menu);
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it. lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
currentMenu == lcd_status_screen currentMenu == lcd_status_screen
#endif #endif
); );
@ -1191,7 +1192,7 @@ void lcd_update()
lcdDrawUpdate = 2; lcdDrawUpdate = 2;
lcd_oldcardstatus = IS_SD_INSERTED; lcd_oldcardstatus = IS_SD_INSERTED;
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it. lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
currentMenu == lcd_status_screen currentMenu == lcd_status_screen
#endif #endif
); );
@ -1294,7 +1295,7 @@ void lcd_finishstatus() {
} }
} }
lcd_status_message[LCD_WIDTH] = '\0'; lcd_status_message[LCD_WIDTH] = '\0';
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) #if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
#if PROGRESS_MSG_EXPIRE > 0 #if PROGRESS_MSG_EXPIRE > 0
messageTick = messageTick =
#endif #endif

Write Preview
Loading…
Cancel
Save