forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Move leveling_is_active to a macro

Browse Source
master
Scott Lahteine 7 years ago
parent fcd3b326e9
commit da93a272a0
6 changed files with 30 additions and 33 deletions
Show Stats Download Patch File Download Diff File

1
Marlin/Marlin.h
Unescape View File

@ -323,7 +323,6 @@ extern float soft_endstop_min[XYZ], soft_endstop_max[XYZ];
#if HAS_LEVELING
bool leveling_is_valid();
bool leveling_is_active();
void set_bed_leveling_enabled(const bool enable=true);
void reset_bed_level();
#endif

34
Marlin/Marlin_main.cpp
Unescape View File

@ -2471,18 +2471,6 @@ static void clean_up_after_endstop_or_probe_move() {
;
}
bool leveling_is_active() {
return
#if ENABLED(MESH_BED_LEVELING)
mbl.active()
#elif ENABLED(AUTO_BED_LEVELING_UBL)
ubl.state.active
#else
planner.abl_enabled
#endif
;
}
/**
* Turn bed leveling on or off, fixing the current
* position as-needed.
@ -2498,7 +2486,7 @@ static void clean_up_after_endstop_or_probe_move() {
constexpr bool can_change = true;
#endif
if (can_change && enable != leveling_is_active()) {
if (can_change && enable != LEVELING_IS_ACTIVE()) {
#if ENABLED(MESH_BED_LEVELING)
@ -2559,7 +2547,7 @@ static void clean_up_after_endstop_or_probe_move() {
void set_z_fade_height(const float zfh) {
const bool level_active = leveling_is_active();
const bool level_active = LEVELING_IS_ACTIVE();
#if ENABLED(AUTO_BED_LEVELING_UBL)
@ -3771,7 +3759,7 @@ inline void gcode_G4() {
#elif ENABLED(AUTO_BED_LEVELING_UBL)
SERIAL_ECHOPGM("UBL");
#endif
if (leveling_is_active()) {
if (LEVELING_IS_ACTIVE()) {
SERIAL_ECHOLNPGM(" (enabled)");
#if ABL_PLANAR
const float diff[XYZ] = {
@ -3802,7 +3790,7 @@ inline void gcode_G4() {
#elif ENABLED(MESH_BED_LEVELING)
SERIAL_ECHOPGM("Mesh Bed Leveling");
if (leveling_is_active()) {
if (LEVELING_IS_ACTIVE()) {
float lz = current_position[Z_AXIS];
planner.apply_leveling(current_position[X_AXIS], current_position[Y_AXIS], lz);
SERIAL_ECHOLNPGM(" (enabled)");
@ -3971,7 +3959,7 @@ inline void gcode_G28(const bool always_home_all) {
// Disable the leveling matrix before homing
#if HAS_LEVELING
#if ENABLED(AUTO_BED_LEVELING_UBL)
const bool ubl_state_at_entry = leveling_is_active();
const bool ubl_state_at_entry = LEVELING_IS_ACTIVE();
#endif
set_bed_leveling_enabled(false);
#endif
@ -4261,7 +4249,7 @@ void home_all_axes() { gcode_G28(true); }
switch (state) {
case MeshReport:
if (leveling_is_valid()) {
SERIAL_PROTOCOLLNPAIR("State: ", leveling_is_active() ? MSG_ON : MSG_OFF);
SERIAL_PROTOCOLLNPAIR("State: ", LEVELING_IS_ACTIVE() ? MSG_ON : MSG_OFF);
mbl_mesh_report();
}
else
@ -4580,7 +4568,7 @@ void home_all_axes() { gcode_G28(true); }
abl_probe_index = -1;
#endif
abl_should_enable = leveling_is_active();
abl_should_enable = LEVELING_IS_ACTIVE();
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
@ -7077,7 +7065,7 @@ inline void gcode_M42() {
// Disable bed level correction in M48 because we want the raw data when we probe
#if HAS_LEVELING
const bool was_enabled = leveling_is_active();
const bool was_enabled = LEVELING_IS_ACTIVE();
set_bed_leveling_enabled(false);
#endif
@ -9413,7 +9401,7 @@ void quickstop_stepper() {
if (parser.seen('Z')) set_z_fade_height(parser.value_linear_units());
#endif
const bool new_status = leveling_is_active();
const bool new_status = LEVELING_IS_ACTIVE();
if (to_enable && !new_status) {
SERIAL_ERROR_START();
@ -9644,7 +9632,7 @@ inline void gcode_M502() {
#endif
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
if (!no_babystep && leveling_is_active())
if (!no_babystep && LEVELING_IS_ACTIVE())
thermalManager.babystep_axis(Z_AXIS, -LROUND(diff * planner.axis_steps_per_mm[Z_AXIS]));
#else
UNUSED(no_babystep);
@ -10691,7 +10679,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#if ENABLED(MESH_BED_LEVELING)
if (leveling_is_active()) {
if (LEVELING_IS_ACTIVE()) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOPAIR("Z before MBL: ", current_position[Z_AXIS]);
#endif

4
Marlin/configuration_store.cpp
Unescape View File

@ -1594,7 +1594,7 @@ void MarlinSettings::reset() {
SERIAL_ECHOLNPGM(":");
}
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M420 S", leveling_is_active() ? 1 : 0);
SERIAL_ECHOPAIR(" M420 S", LEVELING_IS_ACTIVE() ? 1 : 0);
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOPAIR(" Z", planner.z_fade_height);
#endif
@ -1615,7 +1615,7 @@ void MarlinSettings::reset() {
SERIAL_ECHOLNPGM("Auto Bed Leveling:");
}
CONFIG_ECHO_START;
SERIAL_ECHOPAIR(" M420 S", leveling_is_active() ? 1 : 0);
SERIAL_ECHOPAIR(" M420 S", LEVELING_IS_ACTIVE() ? 1 : 0);
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
#endif

10
Marlin/planner.h
Unescape View File

@ -468,6 +468,16 @@ class Planner {
#define PLANNER_XY_FEEDRATE() (min(planner.max_feedrate_mm_s[X_AXIS], planner.max_feedrate_mm_s[Y_AXIS]))
#if ENABLED(MESH_BED_LEVELING)
#define LEVELING_IS_ACTIVE() (mesh_bed_leveling::active())
#elif ENABLED(AUTO_BED_LEVELING_UBL)
#define LEVELING_IS_ACTIVE() (unified_bed_leveling::state.active)
#elif HAS_ABL
#define LEVELING_IS_ACTIVE() (Planner::abl_enabled)
#else
#define LEVELING_IS_ACTIVE() (false)
#endif
extern Planner planner;
#endif // PLANNER_H

12
Marlin/ultralcd.cpp
Unescape View File

@ -50,6 +50,11 @@
#if ENABLED(AUTO_BED_LEVELING_UBL)
#include "ubl.h"
bool ubl_lcd_map_control = false;
#elif HAS_ABL
#include "planner.h"
#elif ENABLED(MESH_BED_LEVELING) && ENABLED(LCD_BED_LEVELING)
#include "mesh_bed_leveling.h"
extern void mesh_probing_done();
#endif
// Initialized by settings.load()
@ -194,11 +199,6 @@ uint16_t max_display_update_time = 0;
void lcd_delta_calibrate_menu();
#endif
#if ENABLED(MESH_BED_LEVELING) && ENABLED(LCD_BED_LEVELING)
#include "mesh_bed_leveling.h"
extern void mesh_probing_done();
#endif
////////////////////////////////////////////
//////////// Menu System Actions ///////////
////////////////////////////////////////////
@ -1937,7 +1937,7 @@ void kill_screen(const char* lcd_msg) {
if (!(axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS]))
MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
else if (leveling_is_valid()) {
_level_state = leveling_is_active();
_level_state = LEVELING_IS_ACTIVE();
MENU_ITEM_EDIT_CALLBACK(bool, MSG_BED_LEVELING, &_level_state, _lcd_toggle_bed_leveling);
}

2
Marlin/ultralcd_impl_HD44780.h
Unescape View File

@ -792,7 +792,7 @@ static void lcd_implementation_status_screen() {
lcd.print(ftostr52sp(FIXFLOAT(current_position[Z_AXIS])));
#if HAS_LEVELING
lcd.write(leveling_is_active() || blink ? '_' : ' ');
lcd.write(LEVELING_IS_ACTIVE() || blink ? '_' : ' ');
#endif
#endif // LCD_HEIGHT > 2

Write Preview
Loading…
Cancel
Save