Merge pull request #6293 from thinkyhead/rc_move_toshiba

Put TOSHIBA with other stepper driver options
8 years ago · dad907b923
parent 7a704af5e6 9343f6a95f
commit dad907b923
24 changed files with 72 additions and 72 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -423,9 +423,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -747,6 +744,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@ -422,9 +422,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -746,6 +743,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@ -405,9 +405,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -730,6 +727,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR true

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@ -405,9 +405,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -730,6 +727,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR true

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@ -414,9 +414,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -738,6 +735,9 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR true

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@ -417,9 +417,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -741,6 +738,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR true

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@ -453,9 +453,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -776,6 +773,9 @@
 #define INVERT_Y_DIR false // K8200: false
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@ -423,9 +423,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -747,6 +744,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR true

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@ -423,9 +423,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -747,6 +744,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR true

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@ -423,9 +423,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -747,6 +744,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@ -420,9 +420,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -746,6 +743,9 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@ -438,9 +438,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -762,6 +759,9 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR true

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@ -443,9 +443,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -767,6 +764,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/TinyBoy2/Configuration.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration.h
@ -473,9 +473,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -798,6 +795,9 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba steppers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@ -414,9 +414,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -738,6 +735,9 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR true

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@ -423,9 +423,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -747,6 +744,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h
@ -491,9 +491,6 @@

 #endif

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -863,6 +860,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR true

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -478,9 +478,6 @@

 #endif

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -849,6 +846,9 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@ -478,9 +478,6 @@

 #endif

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -844,6 +841,9 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@ -465,9 +465,6 @@

 #endif

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -852,6 +849,9 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR true

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@ -483,9 +483,6 @@

 #endif

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -860,6 +857,9 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@ -426,9 +426,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -750,6 +747,9 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@ -413,9 +413,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -743,6 +740,9 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR true

+// Enable this option for Toshiba stepper drivers
+#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.
--- a/Marlin/example_configurations/wt150/Configuration.h
+++ b/Marlin/example_configurations/wt150/Configuration.h
@ -428,9 +428,6 @@
 //#define COREZX
 //#define COREZY

-// Enable this option for Toshiba steppers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@ -752,6 +749,9 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR false

+// Enable this option for Toshiba steppers
+//#define CONFIG_STEPPERS_TOSHIBA
+
 // @section extruder

 // For direct drive extruder v9 set to true, for geared extruder set to false.