Add Hibiscus geared prototype. Increase tx buffer.

- Added Hibiscus_EinsyGearedMini2LCD variant.
- Increased TX_BUFFER_SIZE as recommended for ADVANCED_OK (may affect T1598, but does not appear to fix that issue)
master
Marcio Teixeira 7 years ago
parent 6353ccb1f4
commit dfb8a12a96

@ -13,7 +13,7 @@
* got disabled.
*/
#define LULZBOT_FW_VERSION ".64" // Change this with each update
#define LULZBOT_FW_VERSION ".67" // Change this with each update
#if ( \
!defined(LULZBOT_Gladiola_Mini) && \
@ -24,6 +24,7 @@
!defined(LULZBOT_Hibiscus_Mini2LCD) && \
!defined(LULZBOT_Hibiscus_EinsyMini2) && \
!defined(LULZBOT_Hibiscus_EinsyMini2LCD) && \
!defined(LULZBOT_Hibiscus_EinsyGearedMini2LCD) && \
!defined(LULZBOT_Quiver_TAZ7) \
) || ( \
!defined(TOOLHEAD_Gladiola_SingleExtruder) && \
@ -155,6 +156,26 @@
#define LULZBOT_UUID "e5502411-d46d-421d-ba3a-a20126d7930f"
#endif
#if defined(LULZBOT_Hibiscus_EinsyGearedMini2LCD)
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini 2 LCD"
#define LULZBOT_LCD_MACHINE_NAME "Mini Einsy 2"
#define LULZBOT_IS_MINI
#define LULZBOT_MINI_BED
#define LULZBOT_USE_EINSYRAMBO
#define LULZBOT_USE_EINSY_RETRO
#define LULZBOT_USE_LCD_DISPLAY
#define LULZBOT_TWO_PIECE_BED
#define LULZBOT_USE_AUTOLEVELING
#define LULZBOT_SENSORLESS_HOMING
#define LULZBOT_USE_TMC_STEALTHCHOP_Z
#define LULZBOT_USE_Z_BELT
#define LULZBOT_USE_Z_GEARBOX
#define LULZBOT_USE_EXPERIMENTAL_FEATURES
#define LULZBOT_BAUDRATE 250000
#define LULZBOT_PRINTCOUNTER
#define LULZBOT_UUID "e5502411-d46d-421d-ba3a-a20126d7930f"
#endif
#if defined(LULZBOT_Hibiscus_Mini2LCD)
// Prototype Mini w/ Z-Belt
#define LULZBOT_CUSTOM_MACHINE_NAME "LulzBot Mini 2 LCD"
@ -193,6 +214,7 @@
/****************************** DEBUGGING OPTIONS *******************************/
//#define LULZBOT_TMC_SHOW_CURRENT_ADJUSTMENTS
//#define LULZBOT_MONITOR_TMC_TEMPERATURE
/**************************** GENERAL CONFIGURATION *****************************/
@ -202,6 +224,7 @@
#define LULZBOT_NOZZLE_PARK_FEATURE
#define LULZBOT_AUTO_REPORT_TEMPERATURES
#define LULZBOT_ADVANCED_OK
#define LULZBOT_TX_BUFFER_SIZE 32
#define LULZBOT_HOST_KEEPALIVE_FEATURE_DISABLED
#define LULZBOT_CLARIFY_ERROR_MESSAGES
@ -349,7 +372,7 @@
#if defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_BELT)
#define LULZBOT_HOMING_FEEDRATE_XY (50*60) // mm/m
#define LULZBOT_HOMING_FEEDRATE_Z (50*60) // mm/m
#define LULZBOT_HOMING_FEEDRATE_Z (40*60) // mm/m
#elif defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_SCREW)
#define LULZBOT_HOMING_FEEDRATE_XY (30*60) // mm/m
@ -1709,6 +1732,18 @@
#define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 8, 40} // (mm/sec)
#define LULZBOT_DEFAULT_MAX_ACCELERATION {9000,9000,100,1000}
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT) && defined(LULZBOT_USE_Z_GEARBOX)
#define LULZBOT_Z_STEPS 500
#define LULZBOT_Z_MICROSTEPS 16
#define LULZBOT_DEFAULT_MAX_FEEDRATE {300, 300, 40, 40} // (mm/sec)
#if defined(LULZBOT_USE_TMC_STEALTHCHOP_XY)
/* Stealthchop can skip steps if the acceleration is too high */
#define LULZBOT_DEFAULT_MAX_ACCELERATION {3000,3000,200,1000}
#else
#define LULZBOT_DEFAULT_MAX_ACCELERATION {9000,9000,200,1000}
#endif
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT)
#if defined(LULZBOT_USE_32_MICROSTEPS_ON_Z)
#define LULZBOT_Z_STEPS 200

@ -761,7 +761,7 @@
// For debug-echo: 128 bytes for the optimal speed.
// Other output doesn't need to be that speedy.
// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
#define TX_BUFFER_SIZE 0
#define TX_BUFFER_SIZE LULZBOT_TX_BUFFER_SIZE
// Enable an emergency-command parser to intercept certain commands as they
// enter the serial receive buffer, so they cannot be blocked.

Loading…
Cancel
Save