Specify that Z_PROBE_*_HEIGHT is nozzle-relative

master
Scott Lahteine 8 years ago
parent fc11f05c11
commit e113740fa3

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -523,10 +523,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -521,10 +521,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -533,10 +533,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -535,10 +535,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 5 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 5 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 2 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 2 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -558,10 +558,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -538,10 +538,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -549,10 +549,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -562,10 +562,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -533,10 +533,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -541,10 +541,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -630,10 +630,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 50 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 50 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -624,10 +624,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -627,10 +627,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 50 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 50 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -621,10 +621,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 100 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 100 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -622,10 +622,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 20 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 20 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 10 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 10 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -544,10 +544,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

@ -531,10 +531,11 @@
//#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// //
// Probe Raise options provide clearance for the probe to deploy, stow, and travel. // Minimum heights for the probe to deploy/stow and travel.
// These values specify the distance from the NOZZLE to the BED.
// //
#define Z_PROBE_DEPLOY_HEIGHT 15 // Raise to make room for the probe to deploy / stow #define Z_PROBE_DEPLOY_HEIGHT 15 // Z position for the probe to deploy/stow
#define Z_PROBE_TRAVEL_HEIGHT 5 // Raise between probing points. #define Z_PROBE_TRAVEL_HEIGHT 5 // Z position for travel between points
// //
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset

Loading…
Cancel
Save