Shorthand for do_blocking_move_to

Marlin/Marlin_main.cpp

@@ -1300,6 +1300,10 @@ static void setup_for_endstop_move() {
     feedrate = oldFeedRate;
   }
 
+  inline void do_blocking_move_to_xy(float x, float y) { do_blocking_move_to(x, y, current_position[Z_AXIS]); }
+  inline void do_blocking_move_to_x(float x) { do_blocking_move_to(x, current_position[Y_AXIS], current_position[Z_AXIS]); }
+  inline void do_blocking_move_to_z(float z) { do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], z); }
+
   static void clean_up_after_endstop_move() {
     #ifdef ENDSTOPS_ONLY_FOR_HOMING
       enable_endstops(false);
@@ -1408,7 +1412,7 @@ static void setup_for_endstop_move() {
 
         #if Z_RAISE_AFTER_PROBING > 0
           if (doRaise) {
-            do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING); // this also updates current_position
+            do_blocking_move_to_z(current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING); // this also updates current_position
             st_synchronize();
           }
         #endif
@@ -1494,8 +1498,8 @@ static void setup_for_endstop_move() {
   // Probe bed height at position (x,y), returns the measured z value
   static float probe_pt(float x, float y, float z_before, ProbeAction probe_action=ProbeDeployAndStow, int verbose_level=1) {
     // Move Z up to the z_before height, then move the probe to the given XY
-    do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], z_before); // this also updates current_position
-    do_blocking_move_to(x - X_PROBE_OFFSET_FROM_EXTRUDER, y - Y_PROBE_OFFSET_FROM_EXTRUDER, current_position[Z_AXIS]); // this also updates current_position
+    do_blocking_move_to_z(z_before); // this also updates current_position
+    do_blocking_move_to_xy(x - X_PROBE_OFFSET_FROM_EXTRUDER, y - Y_PROBE_OFFSET_FROM_EXTRUDER); // this also updates current_position
 
     #if !defined(Z_PROBE_SLED) && !defined(Z_PROBE_ALLEN_KEY)
       if (probe_action & ProbeDeploy) deploy_z_probe();
@@ -1604,20 +1608,18 @@ static void setup_for_endstop_move() {
       return;
     }
 
-    if (dock) {
     float oldXpos = current_position[X_AXIS]; // save x position
-      do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING); // rise Z   
-      do_blocking_move_to(X_MAX_POS + SLED_DOCKING_OFFSET + offset - 1, current_position[Y_AXIS], current_position[Z_AXIS]);  // Dock sled a bit closer to ensure proper capturing                                                                                                                           
+    if (dock) {
+      do_blocking_move_to_z(current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING); // raise Z   
+      do_blocking_move_to_x(X_MAX_POS + SLED_DOCKING_OFFSET + offset - 1);  // Dock sled a bit closer to ensure proper capturing
       digitalWrite(SLED_PIN, LOW); // turn off magnet
-      do_blocking_move_to(oldXpos, current_position[Y_AXIS], current_position[Z_AXIS]); // return to position before docking
     } else {
-      float oldXpos = current_position[X_AXIS]; // save x position
       float z_loc = current_position[Z_AXIS];
       if (z_loc < Z_RAISE_BEFORE_PROBING + 5) z_loc = Z_RAISE_BEFORE_PROBING;
       do_blocking_move_to(X_MAX_POS + SLED_DOCKING_OFFSET + offset, current_position[Y_AXIS], z_loc); // this also updates current_position
       digitalWrite(SLED_PIN, HIGH); // turn on magnet
-      do_blocking_move_to(oldXpos, current_position[Y_AXIS], current_position[Z_AXIS]); // return to position before docking
     }
+    do_blocking_move_to_x(oldXpos); // return to position before docking
   }
 
 #endif // Z_PROBE_SLED
@@ -4559,8 +4561,7 @@ inline void gcode_M400() { st_synchronize(); }
     void raise_z_for_servo() {
       float zpos = current_position[Z_AXIS], z_dest = Z_RAISE_BEFORE_HOMING;
       z_dest += axis_known_position[Z_AXIS] ? zprobe_zoffset : zpos;
-      if (zpos < z_dest)
-        do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], z_dest); // also updates current_position
+      if (zpos < z_dest) do_blocking_move_to_z(z_dest); // also updates current_position
     }
   #endif