@ -3,10 +3,10 @@
*/
# ifndef __AVR_ATmega2560__
# error Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu.
# error Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu.
# endif
# define LARGE_FLASH true
# define LARGE_FLASH true
# undef X_MS1_PIN
@ -20,92 +20,94 @@
# undef E1_MS1_PIN
# undef E1_MS2_PIN
# define X_STEP_PIN 37
# define X_DIR_PIN 48
# define X_MIN_PIN 12
# define X_MAX_PIN 30
# define X_ENABLE_PIN 29
# define X_MS1_PIN 40
# define X_MS2_PIN 41
# define Y_STEP_PIN 36
# define Y_DIR_PIN 49
# define Y_MIN_PIN 11
# define Y_MAX_PIN 24
# define Y_ENABLE_PIN 28
# define Y_MS1_PIN 69
# define Y_MS2_PIN 39
# define Z_STEP_PIN 35
# define Z_DIR_PIN 47
# define Z_MIN_PIN 10
# define Z_MAX_PIN 23
# define Z_ENABLE_PIN 27
# define Z_MS1_PIN 68
# define Z_MS2_PIN 67
# define HEATER_BED_PIN 4
# define TEMP_BED_PIN 2
# define HEATER_0_PIN 3
# define TEMP_0_PIN 0
# define HEATER_1_PIN 7
# define TEMP_1_PIN 1
# define X_STEP_PIN 37
# define X_DIR_PIN 48
# define X_MIN_PIN 12
# define X_MAX_PIN 30
# define X_ENABLE_PIN 29
# define X_MS1_PIN 40
# define X_MS2_PIN 41
# define Y_STEP_PIN 36
# define Y_DIR_PIN 49
# define Y_MIN_PIN 11
# define Y_MAX_PIN 24
# define Y_ENABLE_PIN 28
# define Y_MS1_PIN 69
# define Y_MS2_PIN 39
# define Z_STEP_PIN 35
# define Z_DIR_PIN 47
# define Z_MIN_PIN 10
# define Z_MAX_PIN 23
# define Z_ENABLE_PIN 27
# define Z_MS1_PIN 68
# define Z_MS2_PIN 67
# define HEATER_BED_PIN 4
# define TEMP_BED_PIN 2
# define HEATER_0_PIN 3
# define TEMP_0_PIN 0
# define HEATER_1_PIN 7
# define TEMP_1_PIN 1
# if ENABLED(BARICUDA)
# define HEATER_2_PIN 6
# define HEATER_2_PIN 6
# else
# define HEATER_2_PIN -1
# define HEATER_2_PIN -1
# endif
# define TEMP_2_PIN -1
# define TEMP_2_PIN -1
# define E0_STEP_PIN 34
# define E0_DIR_PIN 43
# define E0_ENABLE_PIN 26
# define E0_MS1_PIN 65
# define E0_MS2_PIN 66
# define E0_MS1_PIN 65
# define E0_MS2_PIN 66
# define E1_STEP_PIN -1
# define E1_DIR_PIN -1
# define E1_ENABLE_PIN -1
# define E1_MS1_PIN -1
# define E1_MS2_PIN -1
# define E1_MS1_PIN -1
# define E1_MS2_PIN -1
# define MOTOR_CURRENT_PWM_XY_PIN 46
# define MOTOR_CURRENT_PWM_Z_PIN 45
# define MOTOR_CURRENT_PWM_E_PIN 44
# define MOTOR_CURRENT_PWM_Z_PIN 45
# define MOTOR_CURRENT_PWM_E_PIN 44
//Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
# define MOTOR_CURRENT_PWM_RANGE 2000
# define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
# define SDPOWER -1
# define SDSS 53
# define LED_PIN 13
# define FAN_PIN 8
# define FAN_1_PIN 6
# define PS_ON_PIN -1
# define KILL_PIN -1 // 80 with Smart Controller LCD
# define SUICIDE_PIN -1 // PIN that has to be turned on right after start, to keep power flowing.
# define SDPOWER -1
# define SDSS 53
# define LED_PIN 13
# define FAN_PIN 8
# define FAN_1_PIN 6
# define PS_ON_PIN -1
# define KILL_PIN -1 // 80 with Smart Controller LCD
# define SUICIDE_PIN -1 // PIN that has to be turned on right after start, to keep power flowing.
# if ENABLED(ULTRA_LCD)
# define KILL_PIN 32
# define KILL_PIN 32
# if ENABLED(NEWPANEL)
//arduino pin which triggers an piezzo beeper
# define BEEPER 84 // Beeper on AUX-4
# define LCD_PINS_RS 82
# define BEEPER _PIN 84 // Beeper on AUX-4
# define LCD_PINS_RS 82
# define LCD_PINS_ENABLE 18
# define LCD_PINS_D4 19
# define LCD_PINS_D5 70
# define LCD_PINS_D6 85
# define LCD_PINS_D7 71
# define LCD_PINS_D4 19
# define LCD_PINS_D5 70
# define LCD_PINS_D6 85
# define LCD_PINS_D7 71
//buttons are directly attached using AUX-2
# define BTN_EN1 14
# define BTN_EN2 72
# define BTN_ENC 9 // the click
# define BTN_EN1 14
# define BTN_EN2 72
# define BTN_ENC 9 // the click
# define SDCARDDETECT 15
# define SDCARDDETECT 15
# endif
# endif //NEWPANEL
# endif //ULTRA_LCD
Richard Wackerbarth
10 years ago