ErikZalm
11 years ago
commit
e36d31a3b7
@ -1,748 +1,757 @@
|
|||||||
#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||||
#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Implementation of the LCD display routines for a hitachi HD44780 display. These are common LCD character displays.
|
* Implementation of the LCD display routines for a hitachi HD44780 display. These are common LCD character displays.
|
||||||
* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters.
|
* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters.
|
||||||
**/
|
**/
|
||||||
|
|
||||||
#ifndef REPRAPWORLD_KEYPAD
|
#ifndef REPRAPWORLD_KEYPAD
|
||||||
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
|
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
|
||||||
#else
|
#else
|
||||||
extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
|
extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
////////////////////////////////////
|
////////////////////////////////////
|
||||||
// Setup button and encode mappings for each panel (into 'buttons' variable)
|
// Setup button and encode mappings for each panel (into 'buttons' variable)
|
||||||
//
|
//
|
||||||
// This is just to map common functions (across different panels) onto the same
|
// This is just to map common functions (across different panels) onto the same
|
||||||
// macro name. The mapping is independent of whether the button is directly connected or
|
// macro name. The mapping is independent of whether the button is directly connected or
|
||||||
// via a shift/i2c register.
|
// via a shift/i2c register.
|
||||||
|
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
// All Ultipanels might have an encoder - so this is always be mapped onto first two bits
|
// All Ultipanels might have an encoder - so this is always be mapped onto first two bits
|
||||||
#define BLEN_B 1
|
#define BLEN_B 1
|
||||||
#define BLEN_A 0
|
#define BLEN_A 0
|
||||||
|
|
||||||
#define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
|
#define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
|
||||||
#define EN_A (1<<BLEN_A)
|
#define EN_A (1<<BLEN_A)
|
||||||
|
|
||||||
#if defined(BTN_ENC) && BTN_ENC > -1
|
#if defined(BTN_ENC) && BTN_ENC > -1
|
||||||
// encoder click is directly connected
|
// encoder click is directly connected
|
||||||
#define BLEN_C 2
|
#define BLEN_C 2
|
||||||
#define EN_C (1<<BLEN_C)
|
#define EN_C (1<<BLEN_C)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
//
|
//
|
||||||
// Setup other button mappings of each panel
|
// Setup other button mappings of each panel
|
||||||
//
|
//
|
||||||
#if defined(LCD_I2C_VIKI)
|
#if defined(LCD_I2C_VIKI)
|
||||||
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
|
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
|
||||||
|
|
||||||
// button and encoder bit positions within 'buttons'
|
// button and encoder bit positions within 'buttons'
|
||||||
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
|
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
|
||||||
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
|
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
|
||||||
#define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
|
#define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
|
||||||
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
|
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
|
||||||
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
|
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
|
||||||
|
|
||||||
#if defined(BTN_ENC) && BTN_ENC > -1
|
#if defined(BTN_ENC) && BTN_ENC > -1
|
||||||
// the pause/stop/restart button is connected to BTN_ENC when used
|
// the pause/stop/restart button is connected to BTN_ENC when used
|
||||||
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
|
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
|
||||||
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
|
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
|
||||||
#else
|
#else
|
||||||
#define LCD_CLICKED (buttons&(B_MI|B_RI))
|
#define LCD_CLICKED (buttons&(B_MI|B_RI))
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
|
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
|
||||||
#define LCD_HAS_SLOW_BUTTONS
|
#define LCD_HAS_SLOW_BUTTONS
|
||||||
|
|
||||||
#elif defined(LCD_I2C_PANELOLU2)
|
#elif defined(LCD_I2C_PANELOLU2)
|
||||||
// encoder click can be read through I2C if not directly connected
|
// encoder click can be read through I2C if not directly connected
|
||||||
#if BTN_ENC <= 0
|
#if BTN_ENC <= 0
|
||||||
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
|
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
|
||||||
|
|
||||||
#define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
|
#define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
|
||||||
|
|
||||||
#define LCD_CLICKED (buttons&B_MI)
|
#define LCD_CLICKED (buttons&B_MI)
|
||||||
|
|
||||||
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
|
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
|
||||||
#define LCD_HAS_SLOW_BUTTONS
|
#define LCD_HAS_SLOW_BUTTONS
|
||||||
#else
|
#else
|
||||||
#define LCD_CLICKED (buttons&EN_C)
|
#define LCD_CLICKED (buttons&EN_C)
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#elif defined(REPRAPWORLD_KEYPAD)
|
#elif defined(REPRAPWORLD_KEYPAD)
|
||||||
// define register bit values, don't change it
|
// define register bit values, don't change it
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_F3 0
|
#define BLEN_REPRAPWORLD_KEYPAD_F3 0
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_F2 1
|
#define BLEN_REPRAPWORLD_KEYPAD_F2 1
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_F1 2
|
#define BLEN_REPRAPWORLD_KEYPAD_F1 2
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_UP 3
|
#define BLEN_REPRAPWORLD_KEYPAD_UP 3
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4
|
#define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5
|
#define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_DOWN 6
|
#define BLEN_REPRAPWORLD_KEYPAD_DOWN 6
|
||||||
#define BLEN_REPRAPWORLD_KEYPAD_LEFT 7
|
#define BLEN_REPRAPWORLD_KEYPAD_LEFT 7
|
||||||
|
|
||||||
#define REPRAPWORLD_BTN_OFFSET 3 // bit offset into buttons for shift register values
|
#define REPRAPWORLD_BTN_OFFSET 3 // bit offset into buttons for shift register values
|
||||||
|
|
||||||
#define EN_REPRAPWORLD_KEYPAD_F3 (1<<(BLEN_REPRAPWORLD_KEYPAD_F3+REPRAPWORLD_BTN_OFFSET))
|
#define EN_REPRAPWORLD_KEYPAD_F3 (1<<(BLEN_REPRAPWORLD_KEYPAD_F3+REPRAPWORLD_BTN_OFFSET))
|
||||||
#define EN_REPRAPWORLD_KEYPAD_F2 (1<<(BLEN_REPRAPWORLD_KEYPAD_F2+REPRAPWORLD_BTN_OFFSET))
|
#define EN_REPRAPWORLD_KEYPAD_F2 (1<<(BLEN_REPRAPWORLD_KEYPAD_F2+REPRAPWORLD_BTN_OFFSET))
|
||||||
#define EN_REPRAPWORLD_KEYPAD_F1 (1<<(BLEN_REPRAPWORLD_KEYPAD_F1+REPRAPWORLD_BTN_OFFSET))
|
#define EN_REPRAPWORLD_KEYPAD_F1 (1<<(BLEN_REPRAPWORLD_KEYPAD_F1+REPRAPWORLD_BTN_OFFSET))
|
||||||
#define EN_REPRAPWORLD_KEYPAD_UP (1<<(BLEN_REPRAPWORLD_KEYPAD_UP+REPRAPWORLD_BTN_OFFSET))
|
#define EN_REPRAPWORLD_KEYPAD_UP (1<<(BLEN_REPRAPWORLD_KEYPAD_UP+REPRAPWORLD_BTN_OFFSET))
|
||||||
#define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<(BLEN_REPRAPWORLD_KEYPAD_RIGHT+REPRAPWORLD_BTN_OFFSET))
|
#define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<(BLEN_REPRAPWORLD_KEYPAD_RIGHT+REPRAPWORLD_BTN_OFFSET))
|
||||||
#define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<(BLEN_REPRAPWORLD_KEYPAD_MIDDLE+REPRAPWORLD_BTN_OFFSET))
|
#define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<(BLEN_REPRAPWORLD_KEYPAD_MIDDLE+REPRAPWORLD_BTN_OFFSET))
|
||||||
#define EN_REPRAPWORLD_KEYPAD_DOWN (1<<(BLEN_REPRAPWORLD_KEYPAD_DOWN+REPRAPWORLD_BTN_OFFSET))
|
#define EN_REPRAPWORLD_KEYPAD_DOWN (1<<(BLEN_REPRAPWORLD_KEYPAD_DOWN+REPRAPWORLD_BTN_OFFSET))
|
||||||
#define EN_REPRAPWORLD_KEYPAD_LEFT (1<<(BLEN_REPRAPWORLD_KEYPAD_LEFT+REPRAPWORLD_BTN_OFFSET))
|
#define EN_REPRAPWORLD_KEYPAD_LEFT (1<<(BLEN_REPRAPWORLD_KEYPAD_LEFT+REPRAPWORLD_BTN_OFFSET))
|
||||||
|
|
||||||
#define LCD_CLICKED ((buttons&EN_C) || (buttons&EN_REPRAPWORLD_KEYPAD_F1))
|
#define LCD_CLICKED ((buttons&EN_C) || (buttons&EN_REPRAPWORLD_KEYPAD_F1))
|
||||||
#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons&EN_REPRAPWORLD_KEYPAD_DOWN)
|
#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons&EN_REPRAPWORLD_KEYPAD_DOWN)
|
||||||
#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons&EN_REPRAPWORLD_KEYPAD_UP)
|
#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons&EN_REPRAPWORLD_KEYPAD_UP)
|
||||||
#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons&EN_REPRAPWORLD_KEYPAD_MIDDLE)
|
#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons&EN_REPRAPWORLD_KEYPAD_MIDDLE)
|
||||||
|
|
||||||
#elif defined(NEWPANEL)
|
#elif defined(NEWPANEL)
|
||||||
#define LCD_CLICKED (buttons&EN_C)
|
#define LCD_CLICKED (buttons&EN_C)
|
||||||
|
|
||||||
#else // old style ULTIPANEL
|
#else // old style ULTIPANEL
|
||||||
//bits in the shift register that carry the buttons for:
|
//bits in the shift register that carry the buttons for:
|
||||||
// left up center down right red(stop)
|
// left up center down right red(stop)
|
||||||
#define BL_LE 7
|
#define BL_LE 7
|
||||||
#define BL_UP 6
|
#define BL_UP 6
|
||||||
#define BL_MI 5
|
#define BL_MI 5
|
||||||
#define BL_DW 4
|
#define BL_DW 4
|
||||||
#define BL_RI 3
|
#define BL_RI 3
|
||||||
#define BL_ST 2
|
#define BL_ST 2
|
||||||
|
|
||||||
//automatic, do not change
|
//automatic, do not change
|
||||||
#define B_LE (1<<BL_LE)
|
#define B_LE (1<<BL_LE)
|
||||||
#define B_UP (1<<BL_UP)
|
#define B_UP (1<<BL_UP)
|
||||||
#define B_MI (1<<BL_MI)
|
#define B_MI (1<<BL_MI)
|
||||||
#define B_DW (1<<BL_DW)
|
#define B_DW (1<<BL_DW)
|
||||||
#define B_RI (1<<BL_RI)
|
#define B_RI (1<<BL_RI)
|
||||||
#define B_ST (1<<BL_ST)
|
#define B_ST (1<<BL_ST)
|
||||||
|
|
||||||
#define LCD_CLICKED (buttons&(B_MI|B_ST))
|
#define LCD_CLICKED (buttons&(B_MI|B_ST))
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
////////////////////////
|
////////////////////////
|
||||||
// Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
|
// Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
|
||||||
// These values are independent of which pins are used for EN_A and EN_B indications
|
// These values are independent of which pins are used for EN_A and EN_B indications
|
||||||
// The rotary encoder part is also independent to the chipset used for the LCD
|
// The rotary encoder part is also independent to the chipset used for the LCD
|
||||||
#if defined(EN_A) && defined(EN_B)
|
#if defined(EN_A) && defined(EN_B)
|
||||||
#ifndef ULTIMAKERCONTROLLER
|
#ifndef ULTIMAKERCONTROLLER
|
||||||
#define encrot0 0
|
#define encrot0 0
|
||||||
#define encrot1 2
|
#define encrot1 2
|
||||||
#define encrot2 3
|
#define encrot2 3
|
||||||
#define encrot3 1
|
#define encrot3 1
|
||||||
#else
|
#else
|
||||||
#define encrot0 0
|
#define encrot0 0
|
||||||
#define encrot1 1
|
#define encrot1 1
|
||||||
#define encrot2 3
|
#define encrot2 3
|
||||||
#define encrot3 2
|
#define encrot3 2
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#endif //ULTIPANEL
|
#endif //ULTIPANEL
|
||||||
|
|
||||||
////////////////////////////////////
|
////////////////////////////////////
|
||||||
// Create LCD class instance and chipset-specific information
|
// Create LCD class instance and chipset-specific information
|
||||||
#if defined(LCD_I2C_TYPE_PCF8575)
|
#if defined(LCD_I2C_TYPE_PCF8575)
|
||||||
// note: these are register mapped pins on the PCF8575 controller not Arduino pins
|
// note: these are register mapped pins on the PCF8575 controller not Arduino pins
|
||||||
#define LCD_I2C_PIN_BL 3
|
#define LCD_I2C_PIN_BL 3
|
||||||
#define LCD_I2C_PIN_EN 2
|
#define LCD_I2C_PIN_EN 2
|
||||||
#define LCD_I2C_PIN_RW 1
|
#define LCD_I2C_PIN_RW 1
|
||||||
#define LCD_I2C_PIN_RS 0
|
#define LCD_I2C_PIN_RS 0
|
||||||
#define LCD_I2C_PIN_D4 4
|
#define LCD_I2C_PIN_D4 4
|
||||||
#define LCD_I2C_PIN_D5 5
|
#define LCD_I2C_PIN_D5 5
|
||||||
#define LCD_I2C_PIN_D6 6
|
#define LCD_I2C_PIN_D6 6
|
||||||
#define LCD_I2C_PIN_D7 7
|
#define LCD_I2C_PIN_D7 7
|
||||||
|
|
||||||
#include <Wire.h>
|
#include <Wire.h>
|
||||||
#include <LCD.h>
|
#include <LCD.h>
|
||||||
#include <LiquidCrystal_I2C.h>
|
#include <LiquidCrystal_I2C.h>
|
||||||
#define LCD_CLASS LiquidCrystal_I2C
|
#define LCD_CLASS LiquidCrystal_I2C
|
||||||
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
|
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
|
||||||
|
|
||||||
#elif defined(LCD_I2C_TYPE_MCP23017)
|
#elif defined(LCD_I2C_TYPE_MCP23017)
|
||||||
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
|
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
|
||||||
#define LED_A 0x04 //100
|
#define LED_A 0x04 //100
|
||||||
#define LED_B 0x02 //010
|
#define LED_B 0x02 //010
|
||||||
#define LED_C 0x01 //001
|
#define LED_C 0x01 //001
|
||||||
|
|
||||||
#define LCD_HAS_STATUS_INDICATORS
|
#define LCD_HAS_STATUS_INDICATORS
|
||||||
|
|
||||||
#include <Wire.h>
|
#include <Wire.h>
|
||||||
#include <LiquidTWI2.h>
|
#include <LiquidTWI2.h>
|
||||||
#define LCD_CLASS LiquidTWI2
|
#define LCD_CLASS LiquidTWI2
|
||||||
LCD_CLASS lcd(LCD_I2C_ADDRESS);
|
LCD_CLASS lcd(LCD_I2C_ADDRESS);
|
||||||
|
|
||||||
#elif defined(LCD_I2C_TYPE_MCP23008)
|
#elif defined(LCD_I2C_TYPE_MCP23008)
|
||||||
#include <Wire.h>
|
#include <Wire.h>
|
||||||
#include <LiquidTWI2.h>
|
#include <LiquidTWI2.h>
|
||||||
#define LCD_CLASS LiquidTWI2
|
#define LCD_CLASS LiquidTWI2
|
||||||
LCD_CLASS lcd(LCD_I2C_ADDRESS);
|
LCD_CLASS lcd(LCD_I2C_ADDRESS);
|
||||||
|
|
||||||
#else
|
#elif defined(LCD_I2C_TYPE_PCA8574)
|
||||||
// Standard directly connected LCD implementations
|
#include <LiquidCrystal_I2C.h>
|
||||||
#if LANGUAGE_CHOICE == 6
|
#define LCD_CLASS LiquidCrystal_I2C
|
||||||
#include "LiquidCrystalRus.h"
|
LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT);
|
||||||
#define LCD_CLASS LiquidCrystalRus
|
|
||||||
#else
|
#else
|
||||||
#include <LiquidCrystal.h>
|
// Standard directly connected LCD implementations
|
||||||
#define LCD_CLASS LiquidCrystal
|
#if LANGUAGE_CHOICE == 6
|
||||||
#endif
|
#include "LiquidCrystalRus.h"
|
||||||
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
#define LCD_CLASS LiquidCrystalRus
|
||||||
#endif
|
#else
|
||||||
|
#include <LiquidCrystal.h>
|
||||||
/* Custom characters defined in the first 8 characters of the LCD */
|
#define LCD_CLASS LiquidCrystal
|
||||||
#define LCD_STR_BEDTEMP "\x00"
|
#endif
|
||||||
#define LCD_STR_DEGREE "\x01"
|
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
||||||
#define LCD_STR_THERMOMETER "\x02"
|
#endif
|
||||||
#define LCD_STR_UPLEVEL "\x03"
|
|
||||||
#define LCD_STR_REFRESH "\x04"
|
/* Custom characters defined in the first 8 characters of the LCD */
|
||||||
#define LCD_STR_FOLDER "\x05"
|
#define LCD_STR_BEDTEMP "\x00"
|
||||||
#define LCD_STR_FEEDRATE "\x06"
|
#define LCD_STR_DEGREE "\x01"
|
||||||
#define LCD_STR_CLOCK "\x07"
|
#define LCD_STR_THERMOMETER "\x02"
|
||||||
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
|
#define LCD_STR_UPLEVEL "\x03"
|
||||||
|
#define LCD_STR_REFRESH "\x04"
|
||||||
static void lcd_implementation_init()
|
#define LCD_STR_FOLDER "\x05"
|
||||||
{
|
#define LCD_STR_FEEDRATE "\x06"
|
||||||
byte bedTemp[8] =
|
#define LCD_STR_CLOCK "\x07"
|
||||||
{
|
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
|
||||||
B00000,
|
|
||||||
B11111,
|
static void lcd_implementation_init()
|
||||||
B10101,
|
{
|
||||||
B10001,
|
byte bedTemp[8] =
|
||||||
B10101,
|
{
|
||||||
B11111,
|
B00000,
|
||||||
B00000,
|
B11111,
|
||||||
B00000
|
B10101,
|
||||||
}; //thanks Sonny Mounicou
|
B10001,
|
||||||
byte degree[8] =
|
B10101,
|
||||||
{
|
B11111,
|
||||||
B01100,
|
B00000,
|
||||||
B10010,
|
B00000
|
||||||
B10010,
|
}; //thanks Sonny Mounicou
|
||||||
B01100,
|
byte degree[8] =
|
||||||
B00000,
|
{
|
||||||
B00000,
|
B01100,
|
||||||
B00000,
|
B10010,
|
||||||
B00000
|
B10010,
|
||||||
};
|
B01100,
|
||||||
byte thermometer[8] =
|
B00000,
|
||||||
{
|
B00000,
|
||||||
B00100,
|
B00000,
|
||||||
B01010,
|
B00000
|
||||||
B01010,
|
};
|
||||||
B01010,
|
byte thermometer[8] =
|
||||||
B01010,
|
{
|
||||||
B10001,
|
B00100,
|
||||||
B10001,
|
B01010,
|
||||||
B01110
|
B01010,
|
||||||
};
|
B01010,
|
||||||
byte uplevel[8]={
|
B01010,
|
||||||
B00100,
|
B10001,
|
||||||
B01110,
|
B10001,
|
||||||
B11111,
|
B01110
|
||||||
B00100,
|
};
|
||||||
B11100,
|
byte uplevel[8]={
|
||||||
B00000,
|
B00100,
|
||||||
B00000,
|
B01110,
|
||||||
B00000
|
B11111,
|
||||||
}; //thanks joris
|
B00100,
|
||||||
byte refresh[8]={
|
B11100,
|
||||||
B00000,
|
B00000,
|
||||||
B00110,
|
B00000,
|
||||||
B11001,
|
B00000
|
||||||
B11000,
|
}; //thanks joris
|
||||||
B00011,
|
byte refresh[8]={
|
||||||
B10011,
|
B00000,
|
||||||
B01100,
|
B00110,
|
||||||
B00000,
|
B11001,
|
||||||
}; //thanks joris
|
B11000,
|
||||||
byte folder [8]={
|
B00011,
|
||||||
B00000,
|
B10011,
|
||||||
B11100,
|
B01100,
|
||||||
B11111,
|
B00000,
|
||||||
B10001,
|
}; //thanks joris
|
||||||
B10001,
|
byte folder [8]={
|
||||||
B11111,
|
B00000,
|
||||||
B00000,
|
B11100,
|
||||||
B00000
|
B11111,
|
||||||
}; //thanks joris
|
B10001,
|
||||||
byte feedrate [8]={
|
B10001,
|
||||||
B11100,
|
B11111,
|
||||||
B10000,
|
B00000,
|
||||||
B11000,
|
B00000
|
||||||
B10111,
|
}; //thanks joris
|
||||||
B00101,
|
byte feedrate [8]={
|
||||||
B00110,
|
B11100,
|
||||||
B00101,
|
B10000,
|
||||||
B00000
|
B11000,
|
||||||
}; //thanks Sonny Mounicou
|
B10111,
|
||||||
byte clock [8]={
|
B00101,
|
||||||
B00000,
|
B00110,
|
||||||
B01110,
|
B00101,
|
||||||
B10011,
|
B00000
|
||||||
B10101,
|
}; //thanks Sonny Mounicou
|
||||||
B10001,
|
byte clock [8]={
|
||||||
B01110,
|
B00000,
|
||||||
B00000,
|
B01110,
|
||||||
B00000
|
B10011,
|
||||||
}; //thanks Sonny Mounicou
|
B10101,
|
||||||
|
B10001,
|
||||||
#if defined(LCDI2C_TYPE_PCF8575)
|
B01110,
|
||||||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
B00000,
|
||||||
#ifdef LCD_I2C_PIN_BL
|
B00000
|
||||||
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
|
}; //thanks Sonny Mounicou
|
||||||
lcd.setBacklight(HIGH);
|
|
||||||
#endif
|
#if defined(LCDI2C_TYPE_PCF8575)
|
||||||
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
#elif defined(LCD_I2C_TYPE_MCP23017)
|
#ifdef LCD_I2C_PIN_BL
|
||||||
lcd.setMCPType(LTI_TYPE_MCP23017);
|
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
|
||||||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
lcd.setBacklight(HIGH);
|
||||||
lcd.setBacklight(0); //set all the LEDs off to begin with
|
#endif
|
||||||
|
|
||||||
#elif defined(LCD_I2C_TYPE_MCP23008)
|
#elif defined(LCD_I2C_TYPE_MCP23017)
|
||||||
lcd.setMCPType(LTI_TYPE_MCP23008);
|
lcd.setMCPType(LTI_TYPE_MCP23017);
|
||||||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
|
lcd.setBacklight(0); //set all the LEDs off to begin with
|
||||||
#else
|
|
||||||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
#elif defined(LCD_I2C_TYPE_MCP23008)
|
||||||
#endif
|
lcd.setMCPType(LTI_TYPE_MCP23008);
|
||||||
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
|
|
||||||
lcd.createChar(LCD_STR_DEGREE[0], degree);
|
#elif defined(LCD_I2C_TYPE_PCA8574)
|
||||||
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
|
lcd.init();
|
||||||
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
|
lcd.backlight();
|
||||||
lcd.createChar(LCD_STR_REFRESH[0], refresh);
|
|
||||||
lcd.createChar(LCD_STR_FOLDER[0], folder);
|
#else
|
||||||
lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||||
lcd.createChar(LCD_STR_CLOCK[0], clock);
|
#endif
|
||||||
lcd.clear();
|
|
||||||
}
|
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
|
||||||
static void lcd_implementation_clear()
|
lcd.createChar(LCD_STR_DEGREE[0], degree);
|
||||||
{
|
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
|
||||||
lcd.clear();
|
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
|
||||||
}
|
lcd.createChar(LCD_STR_REFRESH[0], refresh);
|
||||||
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
|
lcd.createChar(LCD_STR_FOLDER[0], folder);
|
||||||
static void lcd_printPGM(const char* str)
|
lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
|
||||||
{
|
lcd.createChar(LCD_STR_CLOCK[0], clock);
|
||||||
char c;
|
lcd.clear();
|
||||||
while((c = pgm_read_byte(str++)) != '\0')
|
}
|
||||||
{
|
static void lcd_implementation_clear()
|
||||||
lcd.write(c);
|
{
|
||||||
}
|
lcd.clear();
|
||||||
}
|
}
|
||||||
/*
|
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
|
||||||
Possible status screens:
|
static void lcd_printPGM(const char* str)
|
||||||
16x2 |0123456789012345|
|
{
|
||||||
|000/000 B000/000|
|
char c;
|
||||||
|Status line.....|
|
while((c = pgm_read_byte(str++)) != '\0')
|
||||||
|
{
|
||||||
16x4 |0123456789012345|
|
lcd.write(c);
|
||||||
|000/000 B000/000|
|
}
|
||||||
|SD100% Z000.0|
|
}
|
||||||
|F100% T--:--|
|
/*
|
||||||
|Status line.....|
|
Possible status screens:
|
||||||
|
16x2 |0123456789012345|
|
||||||
20x2 |01234567890123456789|
|
|000/000 B000/000|
|
||||||
|T000/000D B000/000D |
|
|Status line.....|
|
||||||
|Status line.........|
|
|
||||||
|
16x4 |0123456789012345|
|
||||||
20x4 |01234567890123456789|
|
|000/000 B000/000|
|
||||||
|T000/000D B000/000D |
|
|SD100% Z000.0|
|
||||||
|X+000.0 Y+000.0 Z+000.0|
|
|F100% T--:--|
|
||||||
|F100% SD100% T--:--|
|
|Status line.....|
|
||||||
|Status line.........|
|
|
||||||
|
20x2 |01234567890123456789|
|
||||||
20x4 |01234567890123456789|
|
|T000/000D B000/000D |
|
||||||
|T000/000D B000/000D |
|
|Status line.........|
|
||||||
|T000/000D Z000.0|
|
|
||||||
|F100% SD100% T--:--|
|
20x4 |01234567890123456789|
|
||||||
|Status line.........|
|
|T000/000D B000/000D |
|
||||||
*/
|
|X+000.0 Y+000.0 Z+000.0|
|
||||||
static void lcd_implementation_status_screen()
|
|F100% SD100% T--:--|
|
||||||
{
|
|Status line.........|
|
||||||
int tHotend=int(degHotend(0) + 0.5);
|
|
||||||
int tTarget=int(degTargetHotend(0) + 0.5);
|
20x4 |01234567890123456789|
|
||||||
|
|T000/000D B000/000D |
|
||||||
#if LCD_WIDTH < 20
|
|T000/000D Z000.0|
|
||||||
lcd.setCursor(0, 0);
|
|F100% SD100% T--:--|
|
||||||
lcd.print(itostr3(tHotend));
|
|Status line.........|
|
||||||
lcd.print('/');
|
*/
|
||||||
lcd.print(itostr3left(tTarget));
|
static void lcd_implementation_status_screen()
|
||||||
|
{
|
||||||
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
int tHotend=int(degHotend(0) + 0.5);
|
||||||
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
int tTarget=int(degTargetHotend(0) + 0.5);
|
||||||
lcd.setCursor(8, 0);
|
|
||||||
# if EXTRUDERS > 1
|
#if LCD_WIDTH < 20
|
||||||
tHotend = int(degHotend(1) + 0.5);
|
lcd.setCursor(0, 0);
|
||||||
tTarget = int(degTargetHotend(1) + 0.5);
|
lcd.print(itostr3(tHotend));
|
||||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
lcd.print('/');
|
||||||
# else//Heated bed
|
lcd.print(itostr3left(tTarget));
|
||||||
tHotend=int(degBed() + 0.5);
|
|
||||||
tTarget=int(degTargetBed() + 0.5);
|
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
||||||
# endif
|
lcd.setCursor(8, 0);
|
||||||
lcd.print(itostr3(tHotend));
|
# if EXTRUDERS > 1
|
||||||
lcd.print('/');
|
tHotend = int(degHotend(1) + 0.5);
|
||||||
lcd.print(itostr3left(tTarget));
|
tTarget = int(degTargetHotend(1) + 0.5);
|
||||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||||
|
# else//Heated bed
|
||||||
#else//LCD_WIDTH > 19
|
tHotend=int(degBed() + 0.5);
|
||||||
lcd.setCursor(0, 0);
|
tTarget=int(degTargetBed() + 0.5);
|
||||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||||
lcd.print(itostr3(tHotend));
|
# endif
|
||||||
lcd.print('/');
|
lcd.print(itostr3(tHotend));
|
||||||
lcd.print(itostr3left(tTarget));
|
lcd.print('/');
|
||||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
lcd.print(itostr3left(tTarget));
|
||||||
if (tTarget < 10)
|
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||||
lcd.print(' ');
|
|
||||||
|
#else//LCD_WIDTH > 19
|
||||||
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
lcd.setCursor(0, 0);
|
||||||
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||||
lcd.setCursor(10, 0);
|
lcd.print(itostr3(tHotend));
|
||||||
# if EXTRUDERS > 1
|
lcd.print('/');
|
||||||
tHotend = int(degHotend(1) + 0.5);
|
lcd.print(itostr3left(tTarget));
|
||||||
tTarget = int(degTargetHotend(1) + 0.5);
|
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
if (tTarget < 10)
|
||||||
# else//Heated bed
|
lcd.print(' ');
|
||||||
tHotend=int(degBed() + 0.5);
|
|
||||||
tTarget=int(degTargetBed() + 0.5);
|
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
||||||
# endif
|
lcd.setCursor(10, 0);
|
||||||
lcd.print(itostr3(tHotend));
|
# if EXTRUDERS > 1
|
||||||
lcd.print('/');
|
tHotend = int(degHotend(1) + 0.5);
|
||||||
lcd.print(itostr3left(tTarget));
|
tTarget = int(degTargetHotend(1) + 0.5);
|
||||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||||
if (tTarget < 10)
|
# else//Heated bed
|
||||||
lcd.print(' ');
|
tHotend=int(degBed() + 0.5);
|
||||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
tTarget=int(degTargetBed() + 0.5);
|
||||||
#endif//LCD_WIDTH > 19
|
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||||
|
# endif
|
||||||
#if LCD_HEIGHT > 2
|
lcd.print(itostr3(tHotend));
|
||||||
//Lines 2 for 4 line LCD
|
lcd.print('/');
|
||||||
# if LCD_WIDTH < 20
|
lcd.print(itostr3left(tTarget));
|
||||||
# ifdef SDSUPPORT
|
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||||
lcd.setCursor(0, 2);
|
if (tTarget < 10)
|
||||||
lcd_printPGM(PSTR("SD"));
|
lcd.print(' ');
|
||||||
if (IS_SD_PRINTING)
|
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||||
lcd.print(itostr3(card.percentDone()));
|
#endif//LCD_WIDTH > 19
|
||||||
else
|
|
||||||
lcd_printPGM(PSTR("---"));
|
#if LCD_HEIGHT > 2
|
||||||
lcd.print('%');
|
//Lines 2 for 4 line LCD
|
||||||
# endif//SDSUPPORT
|
# if LCD_WIDTH < 20
|
||||||
# else//LCD_WIDTH > 19
|
# ifdef SDSUPPORT
|
||||||
# if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0
|
lcd.setCursor(0, 2);
|
||||||
//If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps
|
lcd_printPGM(PSTR("SD"));
|
||||||
tHotend=int(degBed() + 0.5);
|
if (IS_SD_PRINTING)
|
||||||
tTarget=int(degTargetBed() + 0.5);
|
lcd.print(itostr3(card.percentDone()));
|
||||||
|
else
|
||||||
lcd.setCursor(0, 1);
|
lcd_printPGM(PSTR("---"));
|
||||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
lcd.print('%');
|
||||||
lcd.print(itostr3(tHotend));
|
# endif//SDSUPPORT
|
||||||
lcd.print('/');
|
# else//LCD_WIDTH > 19
|
||||||
lcd.print(itostr3left(tTarget));
|
# if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0
|
||||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
//If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps
|
||||||
if (tTarget < 10)
|
tHotend=int(degBed() + 0.5);
|
||||||
lcd.print(' ');
|
tTarget=int(degTargetBed() + 0.5);
|
||||||
# else
|
|
||||||
lcd.setCursor(0,1);
|
lcd.setCursor(0, 1);
|
||||||
lcd.print('X');
|
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||||
lcd.print(ftostr3(current_position[X_AXIS]));
|
lcd.print(itostr3(tHotend));
|
||||||
lcd_printPGM(PSTR(" Y"));
|
lcd.print('/');
|
||||||
lcd.print(ftostr3(current_position[Y_AXIS]));
|
lcd.print(itostr3left(tTarget));
|
||||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||||
# endif//LCD_WIDTH > 19
|
if (tTarget < 10)
|
||||||
lcd.setCursor(LCD_WIDTH - 8, 1);
|
lcd.print(' ');
|
||||||
lcd.print('Z');
|
# else
|
||||||
lcd.print(ftostr32(current_position[Z_AXIS]));
|
lcd.setCursor(0,1);
|
||||||
#endif//LCD_HEIGHT > 2
|
lcd.print('X');
|
||||||
|
lcd.print(ftostr3(current_position[X_AXIS]));
|
||||||
#if LCD_HEIGHT > 3
|
lcd_printPGM(PSTR(" Y"));
|
||||||
lcd.setCursor(0, 2);
|
lcd.print(ftostr3(current_position[Y_AXIS]));
|
||||||
lcd.print(LCD_STR_FEEDRATE[0]);
|
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||||
lcd.print(itostr3(feedmultiply));
|
# endif//LCD_WIDTH > 19
|
||||||
lcd.print('%');
|
lcd.setCursor(LCD_WIDTH - 8, 1);
|
||||||
# if LCD_WIDTH > 19
|
lcd.print('Z');
|
||||||
# ifdef SDSUPPORT
|
lcd.print(ftostr32(current_position[Z_AXIS]));
|
||||||
lcd.setCursor(7, 2);
|
#endif//LCD_HEIGHT > 2
|
||||||
lcd_printPGM(PSTR("SD"));
|
|
||||||
if (IS_SD_PRINTING)
|
#if LCD_HEIGHT > 3
|
||||||
lcd.print(itostr3(card.percentDone()));
|
lcd.setCursor(0, 2);
|
||||||
else
|
lcd.print(LCD_STR_FEEDRATE[0]);
|
||||||
lcd_printPGM(PSTR("---"));
|
lcd.print(itostr3(feedmultiply));
|
||||||
lcd.print('%');
|
lcd.print('%');
|
||||||
# endif//SDSUPPORT
|
# if LCD_WIDTH > 19
|
||||||
# endif//LCD_WIDTH > 19
|
# ifdef SDSUPPORT
|
||||||
lcd.setCursor(LCD_WIDTH - 6, 2);
|
lcd.setCursor(7, 2);
|
||||||
lcd.print(LCD_STR_CLOCK[0]);
|
lcd_printPGM(PSTR("SD"));
|
||||||
if(starttime != 0)
|
if (IS_SD_PRINTING)
|
||||||
{
|
lcd.print(itostr3(card.percentDone()));
|
||||||
uint16_t time = millis()/60000 - starttime/60000;
|
else
|
||||||
lcd.print(itostr2(time/60));
|
lcd_printPGM(PSTR("---"));
|
||||||
lcd.print(':');
|
lcd.print('%');
|
||||||
lcd.print(itostr2(time%60));
|
# endif//SDSUPPORT
|
||||||
}else{
|
# endif//LCD_WIDTH > 19
|
||||||
lcd_printPGM(PSTR("--:--"));
|
lcd.setCursor(LCD_WIDTH - 6, 2);
|
||||||
}
|
lcd.print(LCD_STR_CLOCK[0]);
|
||||||
#endif
|
if(starttime != 0)
|
||||||
|
{
|
||||||
//Status message line on the last line
|
uint16_t time = millis()/60000 - starttime/60000;
|
||||||
lcd.setCursor(0, LCD_HEIGHT - 1);
|
lcd.print(itostr2(time/60));
|
||||||
lcd.print(lcd_status_message);
|
lcd.print(':');
|
||||||
}
|
lcd.print(itostr2(time%60));
|
||||||
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
|
}else{
|
||||||
{
|
lcd_printPGM(PSTR("--:--"));
|
||||||
char c;
|
}
|
||||||
//Use all characters in narrow LCDs
|
#endif
|
||||||
#if LCD_WIDTH < 20
|
|
||||||
uint8_t n = LCD_WIDTH - 1 - 1;
|
//Status message line on the last line
|
||||||
#else
|
lcd.setCursor(0, LCD_HEIGHT - 1);
|
||||||
uint8_t n = LCD_WIDTH - 1 - 2;
|
lcd.print(lcd_status_message);
|
||||||
#endif
|
}
|
||||||
lcd.setCursor(0, row);
|
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
|
||||||
lcd.print(pre_char);
|
{
|
||||||
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
|
char c;
|
||||||
{
|
//Use all characters in narrow LCDs
|
||||||
lcd.print(c);
|
#if LCD_WIDTH < 20
|
||||||
pstr++;
|
uint8_t n = LCD_WIDTH - 1 - 1;
|
||||||
n--;
|
#else
|
||||||
}
|
uint8_t n = LCD_WIDTH - 1 - 2;
|
||||||
while(n--)
|
#endif
|
||||||
lcd.print(' ');
|
lcd.setCursor(0, row);
|
||||||
lcd.print(post_char);
|
lcd.print(pre_char);
|
||||||
lcd.print(' ');
|
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
|
||||||
}
|
{
|
||||||
static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
|
lcd.print(c);
|
||||||
{
|
pstr++;
|
||||||
char c;
|
n--;
|
||||||
//Use all characters in narrow LCDs
|
}
|
||||||
#if LCD_WIDTH < 20
|
while(n--)
|
||||||
uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
|
lcd.print(' ');
|
||||||
#else
|
lcd.print(post_char);
|
||||||
uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
|
lcd.print(' ');
|
||||||
#endif
|
}
|
||||||
lcd.setCursor(0, row);
|
static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
|
||||||
lcd.print(pre_char);
|
{
|
||||||
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
|
char c;
|
||||||
{
|
//Use all characters in narrow LCDs
|
||||||
lcd.print(c);
|
#if LCD_WIDTH < 20
|
||||||
pstr++;
|
uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
|
||||||
n--;
|
#else
|
||||||
}
|
uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
|
||||||
lcd.print(':');
|
#endif
|
||||||
while(n--)
|
lcd.setCursor(0, row);
|
||||||
lcd.print(' ');
|
lcd.print(pre_char);
|
||||||
lcd.print(data);
|
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
|
||||||
}
|
{
|
||||||
static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
|
lcd.print(c);
|
||||||
{
|
pstr++;
|
||||||
char c;
|
n--;
|
||||||
//Use all characters in narrow LCDs
|
}
|
||||||
#if LCD_WIDTH < 20
|
lcd.print(':');
|
||||||
uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
|
while(n--)
|
||||||
#else
|
lcd.print(' ');
|
||||||
uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
|
lcd.print(data);
|
||||||
#endif
|
}
|
||||||
lcd.setCursor(0, row);
|
static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
|
||||||
lcd.print(pre_char);
|
{
|
||||||
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
|
char c;
|
||||||
{
|
//Use all characters in narrow LCDs
|
||||||
lcd.print(c);
|
#if LCD_WIDTH < 20
|
||||||
pstr++;
|
uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
|
||||||
n--;
|
#else
|
||||||
}
|
uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
|
||||||
lcd.print(':');
|
#endif
|
||||||
while(n--)
|
lcd.setCursor(0, row);
|
||||||
lcd.print(' ');
|
lcd.print(pre_char);
|
||||||
lcd_printPGM(data);
|
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
|
||||||
}
|
{
|
||||||
#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
lcd.print(c);
|
||||||
#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
pstr++;
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
n--;
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
}
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
lcd.print(':');
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
while(n--)
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
lcd.print(' ');
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
lcd_printPGM(data);
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
}
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||||
|
#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||||
//Add version for callback functions
|
#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
//Add version for callback functions
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
||||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||||
|
#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||||
|
#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
||||||
void lcd_implementation_drawedit(const char* pstr, char* value)
|
#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
||||||
{
|
#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
||||||
lcd.setCursor(1, 1);
|
#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
||||||
lcd_printPGM(pstr);
|
#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||||
lcd.print(':');
|
#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||||
#if LCD_WIDTH < 20
|
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||||
lcd.setCursor(LCD_WIDTH - strlen(value), 1);
|
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||||
#else
|
|
||||||
lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
|
|
||||||
#endif
|
void lcd_implementation_drawedit(const char* pstr, char* value)
|
||||||
lcd.print(value);
|
{
|
||||||
}
|
lcd.setCursor(1, 1);
|
||||||
static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
lcd_printPGM(pstr);
|
||||||
{
|
lcd.print(':');
|
||||||
char c;
|
#if LCD_WIDTH < 20
|
||||||
uint8_t n = LCD_WIDTH - 1;
|
lcd.setCursor(LCD_WIDTH - strlen(value), 1);
|
||||||
lcd.setCursor(0, row);
|
#else
|
||||||
lcd.print('>');
|
lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
|
||||||
if (longFilename[0] != '\0')
|
#endif
|
||||||
{
|
lcd.print(value);
|
||||||
filename = longFilename;
|
}
|
||||||
longFilename[LCD_WIDTH-1] = '\0';
|
static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||||
}
|
{
|
||||||
while( ((c = *filename) != '\0') && (n>0) )
|
char c;
|
||||||
{
|
uint8_t n = LCD_WIDTH - 1;
|
||||||
lcd.print(c);
|
lcd.setCursor(0, row);
|
||||||
filename++;
|
lcd.print('>');
|
||||||
n--;
|
if (longFilename[0] != '\0')
|
||||||
}
|
{
|
||||||
while(n--)
|
filename = longFilename;
|
||||||
lcd.print(' ');
|
longFilename[LCD_WIDTH-1] = '\0';
|
||||||
}
|
}
|
||||||
static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
while( ((c = *filename) != '\0') && (n>0) )
|
||||||
{
|
{
|
||||||
char c;
|
lcd.print(c);
|
||||||
uint8_t n = LCD_WIDTH - 1;
|
filename++;
|
||||||
lcd.setCursor(0, row);
|
n--;
|
||||||
lcd.print(' ');
|
}
|
||||||
if (longFilename[0] != '\0')
|
while(n--)
|
||||||
{
|
lcd.print(' ');
|
||||||
filename = longFilename;
|
}
|
||||||
longFilename[LCD_WIDTH-1] = '\0';
|
static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||||
}
|
{
|
||||||
while( ((c = *filename) != '\0') && (n>0) )
|
char c;
|
||||||
{
|
uint8_t n = LCD_WIDTH - 1;
|
||||||
lcd.print(c);
|
lcd.setCursor(0, row);
|
||||||
filename++;
|
lcd.print(' ');
|
||||||
n--;
|
if (longFilename[0] != '\0')
|
||||||
}
|
{
|
||||||
while(n--)
|
filename = longFilename;
|
||||||
lcd.print(' ');
|
longFilename[LCD_WIDTH-1] = '\0';
|
||||||
}
|
}
|
||||||
static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
while( ((c = *filename) != '\0') && (n>0) )
|
||||||
{
|
{
|
||||||
char c;
|
lcd.print(c);
|
||||||
uint8_t n = LCD_WIDTH - 2;
|
filename++;
|
||||||
lcd.setCursor(0, row);
|
n--;
|
||||||
lcd.print('>');
|
}
|
||||||
lcd.print(LCD_STR_FOLDER[0]);
|
while(n--)
|
||||||
if (longFilename[0] != '\0')
|
lcd.print(' ');
|
||||||
{
|
}
|
||||||
filename = longFilename;
|
static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||||
longFilename[LCD_WIDTH-2] = '\0';
|
{
|
||||||
}
|
char c;
|
||||||
while( ((c = *filename) != '\0') && (n>0) )
|
uint8_t n = LCD_WIDTH - 2;
|
||||||
{
|
lcd.setCursor(0, row);
|
||||||
lcd.print(c);
|
lcd.print('>');
|
||||||
filename++;
|
lcd.print(LCD_STR_FOLDER[0]);
|
||||||
n--;
|
if (longFilename[0] != '\0')
|
||||||
}
|
{
|
||||||
while(n--)
|
filename = longFilename;
|
||||||
lcd.print(' ');
|
longFilename[LCD_WIDTH-2] = '\0';
|
||||||
}
|
}
|
||||||
static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
while( ((c = *filename) != '\0') && (n>0) )
|
||||||
{
|
{
|
||||||
char c;
|
lcd.print(c);
|
||||||
uint8_t n = LCD_WIDTH - 2;
|
filename++;
|
||||||
lcd.setCursor(0, row);
|
n--;
|
||||||
lcd.print(' ');
|
}
|
||||||
lcd.print(LCD_STR_FOLDER[0]);
|
while(n--)
|
||||||
if (longFilename[0] != '\0')
|
lcd.print(' ');
|
||||||
{
|
}
|
||||||
filename = longFilename;
|
static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||||
longFilename[LCD_WIDTH-2] = '\0';
|
{
|
||||||
}
|
char c;
|
||||||
while( ((c = *filename) != '\0') && (n>0) )
|
uint8_t n = LCD_WIDTH - 2;
|
||||||
{
|
lcd.setCursor(0, row);
|
||||||
lcd.print(c);
|
lcd.print(' ');
|
||||||
filename++;
|
lcd.print(LCD_STR_FOLDER[0]);
|
||||||
n--;
|
if (longFilename[0] != '\0')
|
||||||
}
|
{
|
||||||
while(n--)
|
filename = longFilename;
|
||||||
lcd.print(' ');
|
longFilename[LCD_WIDTH-2] = '\0';
|
||||||
}
|
}
|
||||||
#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
|
while( ((c = *filename) != '\0') && (n>0) )
|
||||||
#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
|
{
|
||||||
#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
|
lcd.print(c);
|
||||||
#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
|
filename++;
|
||||||
#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
n--;
|
||||||
#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
}
|
||||||
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
while(n--)
|
||||||
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
lcd.print(' ');
|
||||||
|
}
|
||||||
static void lcd_implementation_quick_feedback()
|
#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
|
||||||
{
|
#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
|
||||||
#ifdef LCD_USE_I2C_BUZZER
|
#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
|
||||||
lcd.buzz(60,1000/6);
|
#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
|
||||||
#elif defined(BEEPER) && BEEPER > -1
|
#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||||
SET_OUTPUT(BEEPER);
|
#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||||
for(int8_t i=0;i<10;i++)
|
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||||
{
|
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||||
WRITE(BEEPER,HIGH);
|
|
||||||
delay(3);
|
static void lcd_implementation_quick_feedback()
|
||||||
WRITE(BEEPER,LOW);
|
{
|
||||||
delay(3);
|
#ifdef LCD_USE_I2C_BUZZER
|
||||||
}
|
lcd.buzz(60,1000/6);
|
||||||
#endif
|
#elif defined(BEEPER) && BEEPER > -1
|
||||||
}
|
SET_OUTPUT(BEEPER);
|
||||||
|
for(int8_t i=0;i<10;i++)
|
||||||
#ifdef LCD_HAS_STATUS_INDICATORS
|
{
|
||||||
static void lcd_implementation_update_indicators()
|
WRITE(BEEPER,HIGH);
|
||||||
{
|
delay(3);
|
||||||
#if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
|
WRITE(BEEPER,LOW);
|
||||||
//set the LEDS - referred to as backlights by the LiquidTWI2 library
|
delay(3);
|
||||||
static uint8_t ledsprev = 0;
|
}
|
||||||
uint8_t leds = 0;
|
#endif
|
||||||
if (target_temperature_bed > 0) leds |= LED_A;
|
}
|
||||||
if (target_temperature[0] > 0) leds |= LED_B;
|
|
||||||
if (fanSpeed) leds |= LED_C;
|
#ifdef LCD_HAS_STATUS_INDICATORS
|
||||||
#if EXTRUDERS > 1
|
static void lcd_implementation_update_indicators()
|
||||||
if (target_temperature[1] > 0) leds |= LED_C;
|
{
|
||||||
#endif
|
#if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
|
||||||
if (leds != ledsprev) {
|
//set the LEDS - referred to as backlights by the LiquidTWI2 library
|
||||||
lcd.setBacklight(leds);
|
static uint8_t ledsprev = 0;
|
||||||
ledsprev = leds;
|
uint8_t leds = 0;
|
||||||
}
|
if (target_temperature_bed > 0) leds |= LED_A;
|
||||||
#endif
|
if (target_temperature[0] > 0) leds |= LED_B;
|
||||||
}
|
if (fanSpeed) leds |= LED_C;
|
||||||
#endif
|
#if EXTRUDERS > 1
|
||||||
|
if (target_temperature[1] > 0) leds |= LED_C;
|
||||||
#ifdef LCD_HAS_SLOW_BUTTONS
|
#endif
|
||||||
static uint8_t lcd_implementation_read_slow_buttons()
|
if (leds != ledsprev) {
|
||||||
{
|
lcd.setBacklight(leds);
|
||||||
#ifdef LCD_I2C_TYPE_MCP23017
|
ledsprev = leds;
|
||||||
// Reading these buttons this is likely to be too slow to call inside interrupt context
|
}
|
||||||
// so they are called during normal lcd_update
|
#endif
|
||||||
return lcd.readButtons() << B_I2C_BTN_OFFSET;
|
}
|
||||||
#endif
|
#endif
|
||||||
}
|
|
||||||
#endif
|
#ifdef LCD_HAS_SLOW_BUTTONS
|
||||||
|
static uint8_t lcd_implementation_read_slow_buttons()
|
||||||
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
{
|
||||||
|
#ifdef LCD_I2C_TYPE_MCP23017
|
||||||
|
// Reading these buttons this is likely to be too slow to call inside interrupt context
|
||||||
|
// so they are called during normal lcd_update
|
||||||
|
return lcd.readButtons() << B_I2C_BTN_OFFSET;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||||
|
|||||||
Loading…
Reference in new issue