Merge pull request #1991 from thinkyhead/thermal_protection_on

Enable thermal runaway protection by default
master
Scott Lahteine 10 years ago
commit e47e888a08

@ -298,8 +298,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

@ -298,8 +298,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

@ -264,8 +264,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

@ -264,8 +264,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

@ -285,8 +285,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

@ -314,8 +314,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

@ -316,8 +316,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

@ -284,8 +284,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

@ -314,8 +314,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

@ -314,8 +314,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

@ -284,8 +284,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

@ -286,8 +286,8 @@ your extruder heater takes 2 minutes to hit the target on heating.
// uncomment the 2 defines below: // uncomment the 2 defines below:
// Parameters for all extruder heaters // Parameters for all extruder heaters
//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds #define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius #define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
// If you want to enable this feature for your bed heater, // If you want to enable this feature for your bed heater,
// uncomment the 2 defines below: // uncomment the 2 defines below:

Loading…
Cancel
Save