forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #553 from iXce/req413

Browse Source 
Update #413 for merging, fix languages.h
master
ErikZalm 12 years ago
parent a105e10075 76841450c8
commit e578f988d3
5 changed files with 1597 additions and 1522 deletions
Show Stats Download Patch File Download Diff File

1
Marlin/Configuration.h
Unescape View File

@ -28,6 +28,7 @@
// 3 = MEGA/RAMPS up to 1.2 = 3 // 3 = MEGA/RAMPS up to 1.2 = 3
// 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed) // 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
// 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed) // 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
// 35 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
// 4 = Duemilanove w/ ATMega328P pin assignment // 4 = Duemilanove w/ ATMega328P pin assignment
// 5 = Gen6 // 5 = Gen6
// 51 = Gen6 deluxe // 51 = Gen6 deluxe

27
Marlin/Marlin_main.cpp
Unescape View File

@ -194,6 +194,10 @@ int EtoPPressure=0;
float retract_recover_length=0, retract_recover_feedrate=8*60; float retract_recover_length=0, retract_recover_feedrate=8*60;
#endif #endif
#ifdef ULTIPANEL
bool powersupply = true;
#endif
//=========================================================================== //===========================================================================
//=============================private variables============================= //=============================private variables=============================
//=========================================================================== //===========================================================================
@ -1390,20 +1394,37 @@ void process_commands()
#endif #endif
#if defined(PS_ON_PIN) && PS_ON_PIN > -1 #if defined(PS_ON_PIN) && PS_ON_PIN > -1
case 80: // M80 - ATX Power On case 80: // M80 - Turn on Power Supply
SET_OUTPUT(PS_ON_PIN); //GND SET_OUTPUT(PS_ON_PIN); //GND
WRITE(PS_ON_PIN, PS_ON_AWAKE); WRITE(PS_ON_PIN, PS_ON_AWAKE);
#ifdef ULTIPANEL
powersupply = true;
LCD_MESSAGEPGM(WELCOME_MSG);
lcd_update();
#endif
break; break;
#endif #endif
case 81: // M81 - ATX Power Off case 81: // M81 - Turn off Power Supply
disable_heater();
st_synchronize();
disable_e0();
disable_e1();
disable_e2();
finishAndDisableSteppers();
fanSpeed = 0;
delay(1000); // Wait a little before to switch off
#if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1
st_synchronize(); st_synchronize();
suicide(); suicide();
#elif defined(PS_ON_PIN) && PS_ON_PIN > -1 #elif defined(PS_ON_PIN) && PS_ON_PIN > -1
SET_OUTPUT(PS_ON_PIN); SET_OUTPUT(PS_ON_PIN);
WRITE(PS_ON_PIN, PS_ON_ASLEEP); WRITE(PS_ON_PIN, PS_ON_ASLEEP);
#endif
#ifdef ULTIPANEL
powersupply = false;
LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF".");
lcd_update();
#endif #endif
break; break;

957
Marlin/language.h
Unescape View File

@ -60,6 +60,8 @@
#define MSG_PREHEAT_ABS "Preheat ABS" #define MSG_PREHEAT_ABS "Preheat ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf" #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf"
#define MSG_COOLDOWN "Cooldown" #define MSG_COOLDOWN "Cooldown"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE "Extrude" #define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract" #define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Move Axis" #define MSG_MOVE_AXIS "Move Axis"
@ -220,6 +222,8 @@
#define MSG_PREHEAT_ABS "Rozgrzej ABS" #define MSG_PREHEAT_ABS "Rozgrzej ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS" #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
#define MSG_COOLDOWN "Chlodzenie" #define MSG_COOLDOWN "Chlodzenie"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE "Ekstruzja" #define MSG_EXTRUDE "Ekstruzja"
#define MSG_RETRACT "Cofanie" #define MSG_RETRACT "Cofanie"
#define MSG_MOVE_AXIS "Ruch osi" #define MSG_MOVE_AXIS "Ruch osi"
@ -290,6 +294,8 @@
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F" #define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F"
#define MSG_AUTORETRACT "Auto. wycofanie" #define MSG_AUTORETRACT "Auto. wycofanie"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
// Serial Console Messages // Serial Console Messages
@ -367,165 +373,169 @@
#if LANGUAGE_CHOICE == 3 #if LANGUAGE_CHOICE == 3
#define WELCOME_MSG MACHINE_NAME " Pret." #define WELCOME_MSG MACHINE_NAME " Pret."
#define MSG_SD_INSERTED "Carte inseree" #define MSG_SD_INSERTED "Carte inseree"
#define MSG_SD_REMOVED "Carte retiree" #define MSG_SD_REMOVED "Carte retiree"
#define MSG_MAIN " Principal \003" #define MSG_MAIN " Principal \003"
#define MSG_AUTOSTART " Demarrage auto." #define MSG_AUTOSTART " Demarrage auto."
#define MSG_DISABLE_STEPPERS " Desactiver moteurs" #define MSG_DISABLE_STEPPERS " Desactiver moteurs"
#define MSG_AUTO_HOME " Home auto." #define MSG_AUTO_HOME " Home auto."
#define MSG_SET_ORIGIN " Regler origine" #define MSG_SET_ORIGIN " Regler origine"
#define MSG_PREHEAT_PLA " Prechauffage PLA" #define MSG_PREHEAT_PLA " Prechauffage PLA"
#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA" #define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
#define MSG_PREHEAT_ABS " Prechauffage ABS" #define MSG_PREHEAT_ABS " Prechauffage ABS"
#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" #define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS"
#define MSG_COOLDOWN " Refroidissement" #define MSG_COOLDOWN " Refroidissement"
#define MSG_EXTRUDE " Extrusion" #define MSG_SWITCH_PS_ON "Allumer alimentation"
#define MSG_RETRACT " Retractation" #define MSG_SWITCH_PS_OFF "Eteindre alimentation"
#define MSG_PREHEAT_PLA " Prechauffage PLA" #define MSG_EXTRUDE " Extrusion"
#define MSG_PREHEAT_ABS " Prechauffage ABS" #define MSG_RETRACT " Retractation"
#define MSG_MOVE_AXIS " Deplacer axe \x7E" #define MSG_PREHEAT_PLA " Prechauffage PLA"
#define MSG_SPEED " Vitesse:" #define MSG_PREHEAT_ABS " Prechauffage ABS"
#define MSG_NOZZLE " \002Buse:" #define MSG_MOVE_AXIS " Deplacer axe \x7E"
#define MSG_NOZZLE1 " \002Buse2:" #define MSG_SPEED " Vitesse:"
#define MSG_NOZZLE2 " \002Buse3:" #define MSG_NOZZLE " \002Buse:"
#define MSG_BED " \002Lit:" #define MSG_NOZZLE1 " \002Buse2:"
#define MSG_FAN_SPEED " Vitesse ventilateur:" #define MSG_NOZZLE2 " \002Buse3:"
#define MSG_FLOW " Flux:" #define MSG_BED " \002Lit:"
#define MSG_CONTROL " Controle \003" #define MSG_FAN_SPEED " Vitesse ventilateur:"
#define MSG_MIN " \002 Min:" #define MSG_FLOW " Flux:"
#define MSG_MAX " \002 Max:" #define MSG_CONTROL " Controle \003"
#define MSG_FACTOR " \002 Facteur:" #define MSG_MIN " \002 Min:"
#define MSG_AUTOTEMP " Temp. Auto.:" #define MSG_MAX " \002 Max:"
#define MSG_ON "Marche " #define MSG_FACTOR " \002 Facteur:"
#define MSG_OFF "Arret" #define MSG_AUTOTEMP " Temp. Auto.:"
#define MSG_PID_P " PID-P: " #define MSG_ON "Marche "
#define MSG_PID_I " PID-I: " #define MSG_OFF "Arret"
#define MSG_PID_D " PID-D: " #define MSG_PID_P " PID-P: "
#define MSG_PID_C " PID-C: " #define MSG_PID_I " PID-I: "
#define MSG_ACC " Acc:" #define MSG_PID_D " PID-D: "
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_PID_C " PID-C: "
#define MSG_VZ_JERK "Vz-jerk" #define MSG_ACC " Acc:"
#define MSG_VE_JERK "Ve-jerk" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VMAX " Vmax " #define MSG_VZ_JERK "Vz-jerk"
#define MSG_X "x:" #define MSG_VE_JERK "Ve-jerk"
#define MSG_Y "y:" #define MSG_VMAX " Vmax "
#define MSG_Z "z:" #define MSG_X "x:"
#define MSG_E "e:" #define MSG_Y "y:"
#define MSG_VMIN " Vmin:" #define MSG_Z "z:"
#define MSG_VTRAV_MIN " Vdepl min:" #define MSG_E "e:"
#define MSG_AMAX " Amax " #define MSG_VMIN " Vmin:"
#define MSG_A_RETRACT " A-retract:" #define MSG_VTRAV_MIN " Vdepl min:"
#define MSG_XSTEPS " Xpas/mm:" #define MSG_AMAX " Amax "
#define MSG_YSTEPS " Ypas/mm:" #define MSG_A_RETRACT " A-retract:"
#define MSG_ZSTEPS " Zpas/mm:" #define MSG_XSTEPS " Xpas/mm:"
#define MSG_ESTEPS " Epas/mm:" #define MSG_YSTEPS " Ypas/mm:"
#define MSG_MAIN_WIDE " Principal \003" #define MSG_ZSTEPS " Zpas/mm:"
#define MSG_RECTRACT_WIDE " Rectractater \x7E" #define MSG_ESTEPS " Epas/mm:"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E" #define MSG_MAIN_WIDE " Principal \003"
#define MSG_TEMPERATURE_RTN " Temperature \003" #define MSG_RECTRACT "Rectracter"
#define MSG_MOTION_WIDE " Mouvement \x7E" #define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Mouvement"
#define MSG_CONTRAST "LCD contrast" #define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM " Sauvegarder memoire" #define MSG_STORE_EPROM " Sauvegarder memoire"
#define MSG_LOAD_EPROM " Lire memoire" #define MSG_LOAD_EPROM " Lire memoire"
#define MSG_RESTORE_FAILSAFE " Restaurer memoire" #define MSG_RESTORE_FAILSAFE " Restaurer memoire"
#define MSG_REFRESH "\004Actualiser" #define MSG_REFRESH "\004Actualiser"
#define MSG_WATCH " Surveiller \003" #define MSG_WATCH " Surveiller \003"
#define MSG_PREPARE " Preparer \x7E" #define MSG_PREPARE " Preparer \x7E"
#define MSG_PREPARE_ALT " Prepare \003" #define MSG_PREPARE_ALT " Prepare \003"
#define MSG_CONTROL_ARROW " Controle \x7E" #define MSG_CONTROL_ARROW " Controle \x7E"
#define MSG_RETRACT_ARROW " Retracter \x7E" #define MSG_RETRACT_ARROW " Retracter \x7E"
#define MSG_TUNE " Regler \x7E" #define MSG_TUNE " Regler \x7E"
#define MSG_PAUSE_PRINT " Pause impression \x7E" #define MSG_PAUSE_PRINT " Pause impression \x7E"
#define MSG_RESUME_PRINT " Reprendre impression \x7E" #define MSG_RESUME_PRINT " Reprendre impression \x7E"
#define MSG_STOP_PRINT " Arreter impression \x7E" #define MSG_STOP_PRINT " Arreter impression \x7E"
#define MSG_CARD_MENU " Menu carte \x7E" #define MSG_CARD_MENU " Menu carte \x7E"
#define MSG_NO_CARD " Pas de carte" #define MSG_NO_CARD " Pas de carte"
#define MSG_DWELL "Repos..." #define MSG_DWELL "Repos..."
#define MSG_USERWAIT "Attente de l'utilisateur..." #define MSG_USERWAIT "Attente de l'utilisateur..."
#define MSG_NO_MOVE "Aucun mouvement." #define MSG_RESUMING "Reprise de l'impression"
#define MSG_PART_RELEASE "Relache partielle" #define MSG_NO_MOVE "Aucun mouvement."
#define MSG_KILLED "TUE." #define MSG_PART_RELEASE "Relache partielle"
#define MSG_STOPPED "STOPPE." #define MSG_KILLED "TUE."
#define MSG_STEPPER_RELEASED "RELACHE." #define MSG_STOPPED "STOPPE."
#define MSG_CONTROL_RETRACT " Retractation mm:" #define MSG_STEPPER_RELEASED "RELACHE."
#define MSG_CONTROL_RETRACTF " Retractation F:" #define MSG_CONTROL_RETRACT " Retractation mm:"
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" #define MSG_CONTROL_RETRACTF " Retractation F:"
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
#define MSG_AUTORETRACT " Retract. Auto.:" #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_AUTORETRACT " Retract. Auto.:"
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. la carte SD"
#define MSG_CNG_SDCARD "Changer de carte SD"
// Serial Console Messages // Serial Console Messages
#define MSG_Enqueing "Mise en tampon \"" #define MSG_Enqueing "Mise en tampon \""
#define MSG_POWERUP "Allumage" #define MSG_POWERUP "Allumage"
#define MSG_EXTERNAL_RESET " RAZ Externe" #define MSG_EXTERNAL_RESET " RAZ Externe"
#define MSG_BROWNOUT_RESET " RAZ defaut alim." #define MSG_BROWNOUT_RESET " RAZ defaut alim."
#define MSG_WATCHDOG_RESET " RAZ Watchdog" #define MSG_WATCHDOG_RESET " RAZ Watchdog"
#define MSG_SOFTWARE_RESET " RAZ logicielle" #define MSG_SOFTWARE_RESET " RAZ logicielle"
#define MSG_MARLIN "Marlin " #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Auteur: " #define MSG_AUTHOR " | Auteur: "
#define MSG_CONFIGURATION_VER " Derniere MaJ: " #define MSG_CONFIGURATION_VER " Derniere MaJ: "
#define MSG_FREE_MEMORY " Memoire libre: " #define MSG_FREE_MEMORY " Memoire libre: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok" #define MSG_OK "ok"
#define MSG_FILE_SAVED "Fichier enregistre." #define MSG_FILE_SAVED "Fichier enregistre."
#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " #define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " #define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " #define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
#define MSG_FILE_PRINTED "Impression terminee" #define MSG_FILE_PRINTED "Impression terminee"
#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" #define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
#define MSG_END_FILE_LIST "Fin de la liste de fichiers" #define MSG_END_FILE_LIST "Fin de la liste de fichiers"
#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" #define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" #define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide" #define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"
#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" #define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " #define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
#define MSG_HEATING "En chauffe..." #define MSG_HEATING "En chauffe..."
#define MSG_HEATING_COMPLETE "Chauffe terminee." #define MSG_HEATING_COMPLETE "Chauffe terminee."
#define MSG_BED_HEATING "Chauffe du lit." #define MSG_BED_HEATING "Chauffe du lit."
#define MSG_BED_DONE "Chauffe du lit terminee." #define MSG_BED_DONE "Chauffe du lit terminee."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Compteur X: " #define MSG_COUNT_X " Compteur X: "
#define MSG_ERR_KILLED "Impression arretee. kill() appelee!" #define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" #define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
#define MSG_RESEND "Renvoie: " #define MSG_RESEND "Renvoie: "
#define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" #define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " #define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
#define MSG_INVALID_EXTRUDER "Extrudeur invalide" #define MSG_INVALID_EXTRUDER "Extrudeur invalide"
#define MSG_X_MIN "x_min: " #define MSG_X_MIN "x_min: "
#define MSG_X_MAX "x_max: " #define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: " #define MSG_Y_MIN "y_min: "
#define MSG_Y_MAX "y_max: " #define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: " #define MSG_Z_MIN "z_min: "
#define MSG_Z_MAX "z_max: " #define MSG_Z_MAX "z_max: "
#define MSG_M119_REPORT "Affichage du status des fin de course" #define MSG_M119_REPORT "Affichage du status des fin de course"
#define MSG_ENDSTOP_HIT "DECLENCHE" #define MSG_ENDSTOP_HIT "DECLENCHE"
#define MSG_ENDSTOP_OPEN "OUVERT" #define MSG_ENDSTOP_OPEN "OUVERT"
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" #define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" #define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" #define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
#define MSG_SD_OPENROOT_FAIL "Echec openRoot" #define MSG_SD_OPENROOT_FAIL "Echec openRoot"
#define MSG_SD_CARD_OK "Carte SD Ok" #define MSG_SD_CARD_OK "Carte SD Ok"
#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir" #define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " #define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
#define MSG_SD_FILE_OPENED "Fichier ouvert: " #define MSG_SD_FILE_OPENED "Fichier ouvert: "
#define MSG_SD_SIZE " Taille: " #define MSG_SD_SIZE " Taille: "
#define MSG_SD_FILE_SELECTED "Fichier selectionne" #define MSG_SD_FILE_SELECTED "Fichier selectionne"
#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " #define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
#define MSG_SD_PRINTING_BYTE "Octet impression SD " #define MSG_SD_PRINTING_BYTE "Octet impression SD "
#define MSG_SD_NOT_PRINTING "Pas d'impression SD" #define MSG_SD_NOT_PRINTING "Pas d'impression SD"
#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" #define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " #define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
#define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: " #define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: "
#define MSG_ENDSTOPS_HIT "Fin de course atteint: " #define MSG_ENDSTOPS_HIT "Fin de course atteint: "
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
#endif #endif
@ -548,6 +558,8 @@
#define MSG_PREHEAT_ABS "Vorwärmen ABS" #define MSG_PREHEAT_ABS "Vorwärmen ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen" #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen"
#define MSG_COOLDOWN "Abkühlen" #define MSG_COOLDOWN "Abkühlen"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE "Extrude" #define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract" #define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Achsen bewegen" #define MSG_MOVE_AXIS "Achsen bewegen"
@ -618,6 +630,8 @@
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_AUTORETRACT "AutoRetr." #define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Filament wechseln" #define MSG_FILAMENTCHANGE "Filament wechseln"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
// Serial Console Messages // Serial Console Messages
@ -696,322 +710,329 @@
#if LANGUAGE_CHOICE == 5 #if LANGUAGE_CHOICE == 5
// LCD Menu Messages // LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME "Lista." #define WELCOME_MSG MACHINE_NAME "Lista."
#define MSG_SD_INSERTED "Tarjeta SD Colocada" #define MSG_SD_INSERTED "Tarjeta SD Colocada"
#define MSG_SD_REMOVED "Tarjeta SD Retirada" #define MSG_SD_REMOVED "Tarjeta SD Retirada"
#define MSG_MAIN "Menu Principal" #define MSG_MAIN "Menu Principal"
#define MSG_AUTOSTART " Autostart" #define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS "Apagar Motores" #define MSG_DISABLE_STEPPERS "Apagar Motores"
#define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero" #define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero"
#define MSG_SET_ORIGIN "Establecer Cero" #define MSG_SET_ORIGIN "Establecer Cero"
#define MSG_PREHEAT_PLA "Precalentar PLA" #define MSG_PREHEAT_PLA "Precalentar PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA" #define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS" #define MSG_PREHEAT_ABS "Precalentar ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS" #define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
#define MSG_COOLDOWN "Enfriar" #define MSG_COOLDOWN "Enfriar"
#define MSG_EXTRUDE "Extruir" #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_RETRACT "Retraer" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_MOVE_AXIS "Mover Ejes" #define MSG_EXTRUDE "Extruir"
#define MSG_SPEED "Velocidad" #define MSG_RETRACT "Retraer"
#define MSG_NOZZLE "Nozzle" #define MSG_MOVE_AXIS "Mover Ejes"
#define MSG_NOZZLE1 "Nozzle2" #define MSG_SPEED "Velocidad"
#define MSG_NOZZLE2 "Nozzle3" #define MSG_NOZZLE "Nozzle"
#define MSG_BED "Base" #define MSG_NOZZLE1 "Nozzle2"
#define MSG_FAN_SPEED "Ventilador" #define MSG_NOZZLE2 "Nozzle3"
#define MSG_FLOW "Flujo" #define MSG_BED "Base"
#define MSG_CONTROL "Control" #define MSG_FAN_SPEED "Ventilador"
#define MSG_MIN "\002 Min" #define MSG_FLOW "Flujo"
#define MSG_MAX "\002 Max" #define MSG_CONTROL "Control"
#define MSG_FACTOR "\002 Fact" #define MSG_MIN "\002 Min"
#define MSG_AUTOTEMP "Autotemp" #define MSG_MAX "\002 Max"
#define MSG_ON "On" #define MSG_FACTOR "\002 Fact"
#define MSG_OFF "Off" #define MSG_AUTOTEMP "Autotemp"
#define MSG_PID_P "PID-P" #define MSG_ON "On"
#define MSG_PID_I "PID-I" #define MSG_OFF "Off"
#define MSG_PID_D "PID-D" #define MSG_PID_P "PID-P"
#define MSG_PID_C "PID-C" #define MSG_PID_I "PID-I"
#define MSG_ACC "Acel" #define MSG_PID_D "PID-D"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_PID_C "PID-C"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_ACC "Acel"
#define MSG_VE_JERK "Ve-jerk" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VMAX "Vmax" #define MSG_VZ_JERK "Vz-jerk"
#define MSG_X "x" #define MSG_VE_JERK "Ve-jerk"
#define MSG_Y "y" #define MSG_VMAX "Vmax"
#define MSG_Z "z" #define MSG_X "x"
#define MSG_E "e" #define MSG_Y "y"
#define MSG_VMIN "Vmin" #define MSG_Z "z"
#define MSG_VTRAV_MIN "VTrav min" #define MSG_E "e"
#define MSG_AMAX "Amax" #define MSG_VMIN "Vmin"
#define MSG_A_RETRACT "A-retrac." #define MSG_VTRAV_MIN "VTrav min"
#define MSG_XSTEPS "X pasos/mm" #define MSG_AMAX "Amax"
#define MSG_YSTEPS "Y pasos/mm" #define MSG_A_RETRACT "A-retrac."
#define MSG_ZSTEPS "Z pasos/mm" #define MSG_XSTEPS "X pasos/mm"
#define MSG_ESTEPS "E pasos/mm" #define MSG_YSTEPS "Y pasos/mm"
#define MSG_RECTRACT "Retraer" #define MSG_ZSTEPS "Z pasos/mm"
#define MSG_TEMPERATURE "Temperatura" #define MSG_ESTEPS "E pasos/mm"
#define MSG_MOTION "Movimiento" #define MSG_RECTRACT "Retraer"
#define MSG_STORE_EPROM "Guardar Memoria" #define MSG_TEMPERATURE "Temperatura"
#define MSG_LOAD_EPROM "Cargar Memoria" #define MSG_MOTION "Movimiento"
#define MSG_RESTORE_FAILSAFE "Rest. de emergencia" #define MSG_STORE_EPROM "Guardar Memoria"
#define MSG_REFRESH "Volver a cargar" #define MSG_LOAD_EPROM "Cargar Memoria"
#define MSG_WATCH "Monitorizar" #define MSG_RESTORE_FAILSAFE "Rest. de emergencia"
#define MSG_PREPARE "Preparar" #define MSG_REFRESH "Volver a cargar"
#define MSG_TUNE "Ajustar" #define MSG_WATCH "Monitorizar"
#define MSG_PAUSE_PRINT "Pausar Impresion" #define MSG_PREPARE "Preparar"
#define MSG_RESUME_PRINT "Reanudar Impresion" #define MSG_TUNE "Ajustar"
#define MSG_STOP_PRINT "Detener Impresion" #define MSG_PAUSE_PRINT "Pausar Impresion"
#define MSG_CARD_MENU "Menu de SD" #define MSG_RESUME_PRINT "Reanudar Impresion"
#define MSG_NO_CARD "No hay Tarjeta SD" #define MSG_STOP_PRINT "Detener Impresion"
#define MSG_DWELL "Reposo..." #define MSG_CARD_MENU "Menu de SD"
#define MSG_USERWAIT "Esperando Ordenes..." #define MSG_NO_CARD "No hay Tarjeta SD"
#define MSG_RESUMING "Resumiendo Impresion" #define MSG_DWELL "Reposo..."
#define MSG_NO_MOVE "Sin movimiento" #define MSG_USERWAIT "Esperando Ordenes..."
#define MSG_KILLED "PARADA DE EMERGENCIA. " #define MSG_RESUMING "Resumiendo Impresion"
#define MSG_STOPPED "PARADA." #define MSG_NO_MOVE "Sin movimiento"
#define MSG_CONTROL_RETRACT "Retraer mm" #define MSG_KILLED "PARADA DE EMERGENCIA. "
#define MSG_CONTROL_RETRACTF "Retraer F" #define MSG_STOPPED "PARADA."
#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm" #define MSG_CONTROL_RETRACT "Retraer mm"
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" #define MSG_CONTROL_RETRACTF "Retraer F"
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" #define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
#define MSG_AUTORETRACT "AutoRetr." #define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
#define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD" #define MSG_AUTORETRACT "AutoRetr."
#define MSG_CNG_SDCARD "Cambiar Tarjeta-SD" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_RECTRACT_WIDE "Retraer" #define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD"
#define MSG_TEMPERATURE_WIDE "Temperatura" #define MSG_CNG_SDCARD "Cambiar Tarjeta-SD"
#define MSG_TEMPERATURE_RTN "Temperatura" #define MSG_RECTRACT_WIDE "Retraer"
#define MSG_MAIN_WIDE "Menu Principal" #define MSG_TEMPERATURE_WIDE "Temperatura"
#define MSG_MOTION_WIDE "Movimiento" #define MSG_TEMPERATURE_RTN "Temperatura"
#define MSG_PREPARE_ALT "Preparar" #define MSG_MAIN_WIDE "Menu Principal"
#define MSG_CONTROL_ARROW "Control" #define MSG_MOTION_WIDE "Movimiento"
#define MSG_RETRACT_ARROW "Retraer" #define MSG_PREPARE_ALT "Preparar"
#define MSG_PART_RELEASE "Desacople Parcial" #define MSG_CONTROL_ARROW "Control"
#define MSG_STEPPER_RELEASED "Desacoplada." #define MSG_RETRACT_ARROW "Retraer"
#define MSG_PART_RELEASE "Desacople Parcial"
#define MSG_STEPPER_RELEASED "Desacoplada."
// Serial Console Messages // Serial Console Messages
#define MSG_Enqueing "En cola \"" #define MSG_Enqueing "En cola \""
#define MSG_POWERUP "PowerUp" #define MSG_POWERUP "PowerUp"
#define MSG_EXTERNAL_RESET " Reset Externo" #define MSG_EXTERNAL_RESET " Reset Externo"
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" #define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
#define MSG_WATCHDOG_RESET " Reset por Bloqueo" #define MSG_WATCHDOG_RESET " Reset por Bloqueo"
#define MSG_SOFTWARE_RESET " Reset por Software" #define MSG_SOFTWARE_RESET " Reset por Software"
#define MSG_MARLIN "Marlin " #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Autor: " #define MSG_AUTHOR " | Autor: "
#define MSG_CONFIGURATION_VER " Ultima actualizacion: " #define MSG_CONFIGURATION_VER " Ultima actualizacion: "
#define MSG_FREE_MEMORY " Memoria libre: " #define MSG_FREE_MEMORY " Memoria libre: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok" #define MSG_OK "ok"
#define MSG_FILE_SAVED "Guardado." #define MSG_FILE_SAVED "Guardado."
#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" #define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" #define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" #define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
#define MSG_FILE_PRINTED "Impresion terminada" #define MSG_FILE_PRINTED "Impresion terminada"
#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" #define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
#define MSG_END_FILE_LIST "Fin de la lista de archivos" #define MSG_END_FILE_LIST "Fin de la lista de archivos"
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" #define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
#define MSG_HEATING "Calentando..." #define MSG_HEATING "Calentando..."
#define MSG_HEATING_COMPLETE "Calentamiento Hecho." #define MSG_HEATING_COMPLETE "Calentamiento Hecho."
#define MSG_BED_HEATING "Calentando la base." #define MSG_BED_HEATING "Calentando la base."
#define MSG_BED_DONE "Base Caliente." #define MSG_BED_DONE "Base Caliente."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Cuenta X:" #define MSG_COUNT_X " Cuenta X:"
#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" #define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" #define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
#define MSG_RESEND "Reenviar:" #define MSG_RESEND "Reenviar:"
#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" #define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " #define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
#define MSG_INVALID_EXTRUDER "Extrusor Invalido" #define MSG_INVALID_EXTRUDER "Extrusor Invalido"
#define MSG_X_MIN "x_min: " #define MSG_X_MIN "x_min: "
#define MSG_X_MAX "x_max: " #define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: " #define MSG_Y_MIN "y_min: "
#define MSG_Y_MAX "y_max: " #define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: " #define MSG_Z_MIN "z_min: "
#define MSG_Z_MAX "z_max: " #define MSG_Z_MAX "z_max: "
#define MSG_M119_REPORT "Comprobando fines de carrera." #define MSG_M119_REPORT "Comprobando fines de carrera."
#define MSG_ENDSTOP_HIT "PULSADO" #define MSG_ENDSTOP_HIT "PULSADO"
#define MSG_ENDSTOP_OPEN "abierto" #define MSG_ENDSTOP_OPEN "abierto"
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." #define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" #define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" #define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" #define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
#define MSG_SD_CARD_OK "Tarjeta SD OK" #define MSG_SD_CARD_OK "Tarjeta SD OK"
#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" #define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " #define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
#define MSG_SD_FILE_OPENED "Archivo abierto:" #define MSG_SD_FILE_OPENED "Archivo abierto:"
#define MSG_SD_SIZE " Tamaño:" #define MSG_SD_SIZE " Tamaño:"
#define MSG_SD_FILE_SELECTED "Archivo Seleccionado" #define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " #define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " #define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" #define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" #define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" #define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
#define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : " #define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : "
#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " #define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
#endif #endif
#if LANGUAGE_CHOICE == 6 #if LANGUAGE_CHOICE == 6
// LCD Menu Messages // LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Готов" #define WELCOME_MSG MACHINE_NAME " Готов"
#define MSG_SD_INSERTED "Карта вставлена" #define MSG_SD_INSERTED "Карта вставлена"
#define MSG_SD_REMOVED "Карта извлечена" #define MSG_SD_REMOVED "Карта извлечена"
#define MSG_MAIN " Меню \003" #define MSG_MAIN " Меню \003"
#define MSG_AUTOSTART " Автостарт " #define MSG_AUTOSTART " Автостарт "
#define MSG_DISABLE_STEPPERS " Выключить двигатели" #define MSG_DISABLE_STEPPERS " Выключить двигатели"
#define MSG_AUTO_HOME " Парковка " #define MSG_AUTO_HOME " Парковка "
#define MSG_SET_ORIGIN " Запомнить ноль " #define MSG_SET_ORIGIN " Запомнить ноль "
#define MSG_PREHEAT_PLA " Преднагрев PLA " #define MSG_PREHEAT_PLA " Преднагрев PLA "
#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA" #define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA"
#define MSG_PREHEAT_ABS " Преднагрев ABS " #define MSG_PREHEAT_ABS " Преднагрев ABS "
#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" #define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS"
#define MSG_COOLDOWN " Охлаждение " #define MSG_COOLDOWN " Охлаждение "
#define MSG_EXTRUDE " Экструзия " #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_RETRACT " Откат" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_MOVE_AXIS " Движение по осям \x7E" #define MSG_EXTRUDE " Экструзия "
#define MSG_SPEED " Скорость:" #define MSG_RETRACT " Откат"
#define MSG_NOZZLE " \002 Фильера:" #define MSG_MOVE_AXIS " Движение по осям \x7E"
#define MSG_NOZZLE1 " \002 Фильера2:" #define MSG_SPEED " Скорость:"
#define MSG_NOZZLE2 " \002 Фильера3:" #define MSG_NOZZLE " \002 Фильера:"
#define MSG_BED " \002 Кровать:" #define MSG_NOZZLE1 " \002 Фильера2:"
#define MSG_FAN_SPEED " Куллер:" #define MSG_NOZZLE2 " \002 Фильера3:"
#define MSG_FLOW " Поток:" #define MSG_BED " \002 Кровать:"
#define MSG_CONTROL " Настройки \003" #define MSG_FAN_SPEED " Куллер:"
#define MSG_MIN " \002 Минимум:" #define MSG_FLOW " Поток:"
#define MSG_MAX " \002 Максимум:" #define MSG_CONTROL " Настройки \003"
#define MSG_FACTOR " \002 Фактор:" #define MSG_MIN " \002 Минимум:"
#define MSG_AUTOTEMP " Autotemp:" #define MSG_MAX " \002 Максимум:"
#define MSG_ON "Вкл. " #define MSG_FACTOR " \002 Фактор:"
#define MSG_OFF "Выкл. " #define MSG_AUTOTEMP " Autotemp:"
#define MSG_PID_P " PID-P: " #define MSG_ON "Вкл. "
#define MSG_PID_I " PID-I: " #define MSG_OFF "Выкл. "
#define MSG_PID_D " PID-D: " #define MSG_PID_P " PID-P: "
#define MSG_PID_C " PID-C: " #define MSG_PID_I " PID-I: "
#define MSG_ACC " Acc:" #define MSG_PID_D " PID-D: "
#define MSG_VXY_JERK " Vxy-jerk: " #define MSG_PID_C " PID-C: "
#define MSG_VZ_JERK "Vz-jerk" #define MSG_ACC " Acc:"
#define MSG_VE_JERK "Ve-jerk" #define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax " #define MSG_VZ_JERK "Vz-jerk"
#define MSG_X "x:" #define MSG_VE_JERK "Ve-jerk"
#define MSG_Y "y:" #define MSG_VMAX " Vmax "
#define MSG_Z "z:" #define MSG_X "x:"
#define MSG_E "e:" #define MSG_Y "y:"
#define MSG_VMIN " Vmin:" #define MSG_Z "z:"
#define MSG_VTRAV_MIN " VTrav min:" #define MSG_E "e:"
#define MSG_AMAX " Amax " #define MSG_VMIN " Vmin:"
#define MSG_A_RETRACT " A-retract:" #define MSG_VTRAV_MIN " VTrav min:"
#define MSG_XSTEPS " X шаг/mm:" #define MSG_AMAX " Amax "
#define MSG_YSTEPS " Y шаг/mm:" #define MSG_A_RETRACT " A-retract:"
#define MSG_ZSTEPS " Z шаг/mm:" #define MSG_XSTEPS " X шаг/mm:"
#define MSG_ESTEPS " E шаг/mm:" #define MSG_YSTEPS " Y шаг/mm:"
#define MSG_RECTRACT " Откат подачи \x7E" #define MSG_ZSTEPS " Z шаг/mm:"
#define MSG_TEMPERATURE " Температура \x7E" #define MSG_ESTEPS " E шаг/mm:"
#define MSG_MOTION " Скорости \x7E" #define MSG_RECTRACT " Откат подачи \x7E"
#define MSG_TEMPERATURE " Температура \x7E"
#define MSG_MOTION " Скорости \x7E"
#define MSG_CONTRAST "LCD contrast" #define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM " Сохранить настройки" #define MSG_STORE_EPROM " Сохранить настройки"
#define MSG_LOAD_EPROM " Загрузить настройки" #define MSG_LOAD_EPROM " Загрузить настройки"
#define MSG_RESTORE_FAILSAFE " Сброс настроек " #define MSG_RESTORE_FAILSAFE " Сброс настроек "
#define MSG_REFRESH "\004Обновить " #define MSG_REFRESH "\004Обновить "
#define MSG_WATCH " Обзор \003" #define MSG_WATCH " Обзор \003"
#define MSG_PREPARE " Действия \x7E" #define MSG_PREPARE " Действия \x7E"
#define MSG_TUNE " Настройки \x7E" #define MSG_TUNE " Настройки \x7E"
#define MSG_PAUSE_PRINT " Пауза печати \x7E" #define MSG_PAUSE_PRINT " Пауза печати \x7E"
#define MSG_RESUME_PRINT " Продолжить печать \x7E" #define MSG_RESUME_PRINT " Продолжить печать \x7E"
#define MSG_STOP_PRINT " Остановить печать \x7E" #define MSG_STOP_PRINT " Остановить печать \x7E"
#define MSG_CARD_MENU " Меню карты \x7E" #define MSG_CARD_MENU " Меню карты \x7E"
#define MSG_NO_CARD " Нет карты" #define MSG_NO_CARD " Нет карты"
#define MSG_DWELL "Сон..." #define MSG_DWELL "Сон..."
#define MSG_USERWAIT "Нажмите для продолж." #define MSG_USERWAIT "Нажмите для продолж."
#define MSG_NO_MOVE "Нет движения. " #define MSG_RESUMING "Resuming print"
#define MSG_PART_RELEASE " Извлечение принта " #define MSG_NO_MOVE "Нет движения. "
#define MSG_KILLED "УБИТО. " #define MSG_PART_RELEASE " Извлечение принта "
#define MSG_STOPPED "ОСТАНОВЛЕНО. " #define MSG_KILLED "УБИТО. "
#define MSG_CONTROL_RETRACT " Откат mm:" #define MSG_STOPPED "ОСТАНОВЛЕНО. "
#define MSG_CONTROL_RETRACTF " Откат F:" #define MSG_CONTROL_RETRACT " Откат mm:"
#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:" #define MSG_CONTROL_RETRACTF " Откат F:"
#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:" #define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" #define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:"
#define MSG_AUTORETRACT " АвтоОткат:" #define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_AUTORETRACT " АвтоОткат:"
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
// Serial Console Messages // Serial Console Messages
#define MSG_Enqueing "Запланировано \"" #define MSG_Enqueing "Запланировано \""
#define MSG_POWERUP "Включение питания" #define MSG_POWERUP "Включение питания"
#define MSG_EXTERNAL_RESET " Внешний сброс" #define MSG_EXTERNAL_RESET " Внешний сброс"
#define MSG_BROWNOUT_RESET " Brown out сброс" #define MSG_BROWNOUT_RESET " Brown out сброс"
#define MSG_WATCHDOG_RESET " Watchdog сброс" #define MSG_WATCHDOG_RESET " Watchdog сброс"
#define MSG_SOFTWARE_RESET " программный сброс" #define MSG_SOFTWARE_RESET " программный сброс"
#define MSG_MARLIN "Marlin " #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Автор: " #define MSG_AUTHOR " | Автор: "
#define MSG_CONFIGURATION_VER " Последнее обновление: " #define MSG_CONFIGURATION_VER " Последнее обновление: "
#define MSG_FREE_MEMORY " Памяти свободно: " #define MSG_FREE_MEMORY " Памяти свободно: "
#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " #define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
#define MSG_OK "ok" #define MSG_OK "ok"
#define MSG_FILE_SAVED "Файл записан." #define MSG_FILE_SAVED "Файл записан."
#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" #define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" #define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:" #define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
#define MSG_FILE_PRINTED "Печать файла завершена" #define MSG_FILE_PRINTED "Печать файла завершена"
#define MSG_BEGIN_FILE_LIST "Список файлов" #define MSG_BEGIN_FILE_LIST "Список файлов"
#define MSG_END_FILE_LIST "Конец списка файлов" #define MSG_END_FILE_LIST "Конец списка файлов"
#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " #define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " #define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера " #define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера "
#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" #define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " #define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
#define MSG_HEATING "Нагрев... " #define MSG_HEATING "Нагрев... "
#define MSG_HEATING_COMPLETE "Наргето. " #define MSG_HEATING_COMPLETE "Наргето. "
#define MSG_BED_HEATING "Нагрев стола... " #define MSG_BED_HEATING "Нагрев стола... "
#define MSG_BED_DONE "Стол нагрет. " #define MSG_BED_DONE "Стол нагрет. "
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Count X:" #define MSG_COUNT_X " Count X:"
#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" #define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" #define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
#define MSG_RESEND "Переотправка:" #define MSG_RESEND "Переотправка:"
#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" #define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
#define MSG_ACTIVE_EXTRUDER "Активный экструдер: " #define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
#define MSG_INVALID_EXTRUDER "Ошибка экструдера" #define MSG_INVALID_EXTRUDER "Ошибка экструдера"
#define MSG_X_MIN "x_min:" #define MSG_X_MIN "x_min:"
#define MSG_X_MAX "x_max:" #define MSG_X_MAX "x_max:"
#define MSG_Y_MIN "y_min:" #define MSG_Y_MIN "y_min:"
#define MSG_Y_MAX "y_max:" #define MSG_Y_MAX "y_max:"
#define MSG_Z_MIN "z_min:" #define MSG_Z_MIN "z_min:"
#define MSG_Z_MAX "z_max:" #define MSG_Z_MAX "z_max:"
#define MSG_M119_REPORT "Статус концевиков" #define MSG_M119_REPORT "Статус концевиков"
#define MSG_ENDSTOP_HIT "Срабатывание концевика" #define MSG_ENDSTOP_HIT "Срабатывание концевика"
#define MSG_ENDSTOP_OPEN "Концевик освобожден" #define MSG_ENDSTOP_OPEN "Концевик освобожден"
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" #define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку"
#define MSG_SD_INIT_FAIL "Ошибка инициализации SD" #define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" #define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" #define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня"
#define MSG_SD_CARD_OK "SD карта в порядке" #define MSG_SD_CARD_OK "SD карта в порядке"
#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" #define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " #define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
#define MSG_SD_FILE_OPENED "Файл открыт:" #define MSG_SD_FILE_OPENED "Файл открыт:"
#define MSG_SD_SIZE " Размер:" #define MSG_SD_SIZE " Размер:"
#define MSG_SD_FILE_SELECTED "Файл выбран" #define MSG_SD_FILE_SELECTED "Файл выбран"
#define MSG_SD_WRITE_TO_FILE "Запись в файл: " #define MSG_SD_WRITE_TO_FILE "Запись в файл: "
#define MSG_SD_PRINTING_BYTE "SD печать byte " #define MSG_SD_PRINTING_BYTE "SD печать byte "
#define MSG_SD_NOT_PRINTING "нет SD печати" #define MSG_SD_NOT_PRINTING "нет SD печати"
#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" #define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" #define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:"
#define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : " #define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : "
#define MSG_ENDSTOPS_HIT "концевик сработал: " #define MSG_ENDSTOPS_HIT "концевик сработал: "
#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" #define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" #define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
#endif #endif
@ -1032,6 +1053,8 @@
#define MSG_PREHEAT_ABS "Preriscalda ABS" #define MSG_PREHEAT_ABS "Preriscalda ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf" #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
#define MSG_COOLDOWN "Raffredda" #define MSG_COOLDOWN "Raffredda"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE "Estrudi" #define MSG_EXTRUDE "Estrudi"
#define MSG_RETRACT "Ritrai" #define MSG_RETRACT "Ritrai"
#define MSG_MOVE_AXIS "Muovi Asse" #define MSG_MOVE_AXIS "Muovi Asse"
@ -1193,6 +1216,8 @@
#define MSG_PREHEAT_ABS " pre-aquecer ABS" #define MSG_PREHEAT_ABS " pre-aquecer ABS"
#define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting" #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
#define MSG_COOLDOWN " Esfriar" #define MSG_COOLDOWN " Esfriar"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE " Extrudar" #define MSG_EXTRUDE " Extrudar"
#define MSG_RETRACT " Retrair" #define MSG_RETRACT " Retrair"
#define MSG_PREHEAT_PLA " pre-aquecer PLA" #define MSG_PREHEAT_PLA " pre-aquecer PLA"
@ -1234,10 +1259,9 @@
#define MSG_ZSTEPS " Zpasso/mm:" #define MSG_ZSTEPS " Zpasso/mm:"
#define MSG_ESTEPS " Epasso/mm:" #define MSG_ESTEPS " Epasso/mm:"
#define MSG_MAIN_WIDE " Menu Principal \003" #define MSG_MAIN_WIDE " Menu Principal \003"
#define MSG_RECTRACT_WIDE " Retrair \x7E" #define MSG_RECTRACT "Retrair"
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E" #define MSG_TEMPERATURE "Temperatura"
#define MSG_TEMPERATURE_RTN " Temperatura \003" #define MSG_MOTION "Movimento"
#define MSG_MOTION_WIDE " Movimento \x7E"
#define MSG_STORE_EPROM " Guardar memoria" #define MSG_STORE_EPROM " Guardar memoria"
#define MSG_LOAD_EPROM " Carregar memoria" #define MSG_LOAD_EPROM " Carregar memoria"
#define MSG_RESTORE_FAILSAFE " Rest. de emergencia" #define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
@ -1255,6 +1279,7 @@
#define MSG_NO_CARD " Sem cartao SD" #define MSG_NO_CARD " Sem cartao SD"
#define MSG_DWELL "Repouso..." #define MSG_DWELL "Repouso..."
#define MSG_USERWAIT "Esperando Ordem..." #define MSG_USERWAIT "Esperando Ordem..."
#define MSG_RESUMING "Resuming print"
#define MSG_NO_MOVE "Sem movimento." #define MSG_NO_MOVE "Sem movimento."
#define MSG_PART_RELEASE "Lancamento Parcial" #define MSG_PART_RELEASE "Lancamento Parcial"
#define MSG_KILLED "PARADA DE EMERGENCIA. " #define MSG_KILLED "PARADA DE EMERGENCIA. "
@ -1268,6 +1293,8 @@
#define MSG_AUTORETRACT " AutoRetr.:" #define MSG_AUTORETRACT " AutoRetr.:"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu." #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
// Serial Console Messages // Serial Console Messages
@ -1363,6 +1390,8 @@
#define MSG_PREHEAT_ABS "Esilammita ABS" #define MSG_PREHEAT_ABS "Esilammita ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf" #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf"
#define MSG_COOLDOWN "Jaahdyta" #define MSG_COOLDOWN "Jaahdyta"
#define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE "Pursota" #define MSG_EXTRUDE "Pursota"
#define MSG_RETRACT "Veda takaisin" #define MSG_RETRACT "Veda takaisin"
#define MSG_MOVE_AXIS "Liikuta akseleita" #define MSG_MOVE_AXIS "Liikuta akseleita"
@ -1430,6 +1459,8 @@
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_AUTORETRACT "AutoVeto." #define MSG_AUTORETRACT "AutoVeto."
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
// Serial Console Messages // Serial Console Messages

27
Marlin/pins.h
Unescape View File

@ -298,7 +298,7 @@
* Arduino Mega pin assignment * Arduino Mega pin assignment
* *
****************************************************************************************/ ****************************************************************************************/
#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77 #if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77
#define KNOWN_BOARD 1 #define KNOWN_BOARD 1
//////////////////FIX THIS////////////// //////////////////FIX THIS//////////////
@ -314,7 +314,7 @@
// #define RAMPS_V_1_0 // #define RAMPS_V_1_0
#if MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77 #if MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77
#define LARGE_FLASH true #define LARGE_FLASH true
@ -392,7 +392,7 @@
#define LED_PIN 13 #define LED_PIN 13
#endif #endif
#if MOTHERBOARD == 33 #if MOTHERBOARD == 33 || MOTHERBOARD == 35
#define FAN_PIN 9 // (Sprinter config) #define FAN_PIN 9 // (Sprinter config)
#else #else
#define FAN_PIN 4 // IO pin. Buffer needed #define FAN_PIN 4 // IO pin. Buffer needed
@ -402,6 +402,10 @@
#define FAN_PIN 8 #define FAN_PIN 8
#endif #endif
#if MOTHERBOARD == 35
#define CONTROLLERFAN_PIN 10 //Pin used for the fan to cool controller
#endif
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) #if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
@ -410,12 +414,18 @@
#define KILL_PIN -1 #define KILL_PIN -1
#endif #endif
#if MOTHERBOARD == 35
#define HEATER_0_PIN 8
#else
#define HEATER_0_PIN 10 // EXTRUDER 1 #define HEATER_0_PIN 10 // EXTRUDER 1
#endif
#if MOTHERBOARD == 33 #if MOTHERBOARD == 33
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#else #else
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter) #define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
#endif #endif
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#if MOTHERBOARD == 77 #if MOTHERBOARD == 77
@ -427,11 +437,16 @@
#define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING #define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING #define TEMP_2_PIN -1 // ANALOG NUMBERING
#if MOTHERBOARD == 35
#define HEATER_BED_PIN -1 // NO BED
#else
#if MOTHERBOARD == 77 #if MOTHERBOARD == 77
#define HEATER_BED_PIN 9 // BED #define HEATER_BED_PIN 9 // BED
#else #else
#define HEATER_BED_PIN 8 // BED #define HEATER_BED_PIN 8 // BED
#endif #endif
#endif
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
@ -578,7 +593,7 @@
#define TEMP_2_PIN -1 #define TEMP_2_PIN -1
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#endif // MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77 #endif // MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77
// SPI for Max6675 Thermocouple // SPI for Max6675 Thermocouple
@ -592,9 +607,7 @@
#define MAX6675_SS 49 #define MAX6675_SS 49
#endif #endif
#endif //MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 77 #endif //MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77
/**************************************************************************************** /****************************************************************************************
* Duemilanove w/ ATMega328P pin assignment * Duemilanove w/ ATMega328P pin assignment

9
Marlin/ultralcd.cpp
Unescape View File

@ -40,6 +40,7 @@ void copy_and_scalePID_d();
/* Different menus */ /* Different menus */
static void lcd_status_screen(); static void lcd_status_screen();
#ifdef ULTIPANEL #ifdef ULTIPANEL
extern bool powersupply;
static void lcd_main_menu(); static void lcd_main_menu();
static void lcd_tune_menu(); static void lcd_tune_menu();
static void lcd_prepare_menu(); static void lcd_prepare_menu();
@ -348,6 +349,14 @@ static void lcd_prepare_menu()
MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla); MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla);
MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs); MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs);
MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown); MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
#if PS_ON_PIN > -1
if (powersupply)
{
MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
}else{
MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
}
#endif
MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu); MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
END_MENU(); END_MENU();
} }

Write Preview
Loading…
Cancel
Save