Reduce UBL RAM usage by making G26/G29 optional

Marlin/G26_Mesh_Validation_Tool.cpp

@@ -113,6 +113,7 @@
    *   Y #  Y coordinate  Specify the starting location of the drawing activity.
    */
 
+  extern bool g26_debug_flag;
   extern bool ubl_has_control_of_lcd_panel;
   extern float feedrate;
   //extern bool relative_mode;
@@ -171,8 +172,7 @@
 
   int8_t prime_flag = 0;
 
-  bool keep_heaters_on = false,
+  bool keep_heaters_on = false;
-       g26_debug_flag = false;
 
   /**
    * G26: Mesh Validation Pattern generation.

Marlin/Marlin_main.cpp

@@ -299,11 +299,13 @@
 #if ENABLED(AUTO_BED_LEVELING_UBL)
   #include "UBL.h"
   unified_bed_leveling ubl;
-#define UBL_MESH_VALID !(   z_values[0][0] == z_values[0][1] && z_values[0][1] == z_values[0][2] \
+  #define UBL_MESH_VALID !( ( z_values[0][0] == z_values[0][1] && z_values[0][1] == z_values[0][2] \
-                         && z_values[1][0] == z_values[1][1] && z_values[1][1] == z_values[1][2] \
+                           && z_values[1][0] == z_values[1][1] && z_values[1][1] == z_values[1][2] \
-                         && z_values[2][0] == z_values[2][1] && z_values[2][1] == z_values[2][2] \
+                           && z_values[2][0] == z_values[2][1] && z_values[2][1] == z_values[2][2] \
-                         && z_values[0][0] == 0 && z_values[1][0] == 0 && z_values[2][0] == 0    \
+                           && z_values[0][0] == 0 && z_values[1][0] == 0 && z_values[2][0] == 0 )  \
-                         || isnan(z_values[0][0]))
+                           || isnan(z_values[0][0]))
+  extern bool g26_debug_flag;
+  extern int ubl_eeprom_start;
 #endif
 
 bool Running = true;
@@ -7213,10 +7215,54 @@ void quickstop_stepper() {
    *       S[bool]   Turns leveling on or off
    *       Z[height] Sets the Z fade height (0 or none to disable)
    *       V[bool]   Verbose - Print the leveling grid
+   *
+   *       L[index]  Load UBL mesh from index (0 is default)
    */
   inline void gcode_M420() {
-    bool to_enable = false;
 
+    #if ENABLED(AUTO_BED_LEVELING_UBL)
+      // L to load a mesh from the EEPROM
+      if (code_seen('L')) {
+        const int8_t storage_slot = code_has_value() ? code_value_int() : ubl.state.eeprom_storage_slot;
+        const int16_t j = (UBL_LAST_EEPROM_INDEX - ubl.eeprom_start) / sizeof(z_values);
+        if (storage_slot < 0 || storage_slot >= j || ubl.eeprom_start <= 0) {
+          SERIAL_PROTOCOLLNPGM("?EEPROM storage not available for use.\n");
+          return;
+        }
+        ubl.load_mesh(Storage_Slot);
+        ubl.state.eeprom_storage_slot = Storage_Slot;
+        if (Storage_Slot != ubl.state.eeprom_storage_slot)
+          ubl.store_state();
+        ubl.display_map(0);  // Right now, we only support one type of map
+        SERIAL_ECHOLNPAIR("UBL_MESH_VALID =  ", UBL_MESH_VALID);
+        SERIAL_ECHOLNPAIR("eeprom_storage_slot = ", ubl.state.eeprom_storage_slot);
+      }
+    #endif // AUTO_BED_LEVELING_UBL
+
+    // V to print the matrix or mesh
+    if (code_seen('V')) {
+      #if ABL_PLANAR
+        planner.bed_level_matrix.debug("Bed Level Correction Matrix:");
+      #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
+        if (bilinear_grid_spacing[X_AXIS]) {
+          print_bilinear_leveling_grid();
+          #if ENABLED(ABL_BILINEAR_SUBDIVISION)
+            bed_level_virt_print();
+          #endif
+        }
+      #elif ENABLED(AUTO_BED_LEVELING_UBL)
+        ubl.display_map(0);  // Currently only supports one map type
+        SERIAL_ECHOLNPAIR("UBL_MESH_VALID =  ", UBL_MESH_VALID);
+        SERIAL_ECHOLNPAIR("eeprom_storage_slot = ", ubl.state.eeprom_storage_slot);
+      #elif ENABLED(MESH_BED_LEVELING)
+        if (mbl.has_mesh()) {
+          SERIAL_ECHOLNPGM("Mesh Bed Level data:");
+          mbl_mesh_report();
+        }
+      #endif
+    }
+
+    bool to_enable = false;
     if (code_seen('S')) {
       to_enable = code_value_bool();
       set_bed_leveling_enabled(to_enable);
@@ -7243,28 +7289,6 @@ void quickstop_stepper() {
 
     SERIAL_ECHO_START;
     SERIAL_ECHOLNPAIR("Bed Leveling ", new_status ? MSG_ON : MSG_OFF);
-
-    // V to print the matrix or mesh
-    if (code_seen('V')) {
-      #if ABL_PLANAR
-        planner.bed_level_matrix.debug("Bed Level Correction Matrix:");
-      #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
-        if (bilinear_grid_spacing[X_AXIS]) {
-          print_bilinear_leveling_grid();
-          #if ENABLED(ABL_BILINEAR_SUBDIVISION)
-            bed_level_virt_print();
-          #endif
-        }
-      #elif ENABLED(AUTO_BED_LEVELING_UBL)
-        ubl.display_map(0);  // Right now, we only support one type of map
-      #elif ENABLED(MESH_BED_LEVELING)
-        if (mbl.has_mesh()) {
-          SERIAL_ECHOLNPGM("Mesh Bed Level data:");
-          mbl_mesh_report();
-        }
-      #endif
-    }
-
   }
 #endif
 
@@ -8595,7 +8619,7 @@ void process_next_command() {
         gcode_G28();
         break;
 
-      #if PLANNER_LEVELING
+      #if PLANNER_LEVELING && !ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(UBL_MESH_EDIT_ENABLED)
         case 29: // G29 Detailed Z probe, probes the bed at 3 or more points,
                  // or provides access to the UBL System if enabled.
           gcode_G29();

Marlin/UBL.h

@@ -81,11 +81,6 @@
     #define MESH_X_DIST ((float(UBL_MESH_MAX_X) - float(UBL_MESH_MIN_X)) / (float(UBL_MESH_NUM_X_POINTS) - 1.0))
     #define MESH_Y_DIST ((float(UBL_MESH_MAX_Y) - float(UBL_MESH_MIN_Y)) / (float(UBL_MESH_NUM_Y_POINTS) - 1.0))
 
-    #if ENABLED(UBL_MESH_EDIT_ENABLED)
-      extern bool g26_debug_flag;
-    #else
-      constexpr bool g26_debug_flag = false;
-    #endif
     extern float last_specified_z;
     extern float fade_scaling_factor_for_current_height;
     extern float z_values[UBL_MESH_NUM_X_POINTS][UBL_MESH_NUM_Y_POINTS];
@@ -339,7 +334,6 @@
     }; // class unified_bed_leveling
 
     extern unified_bed_leveling ubl;
-    extern int ubl_eeprom_start;
 
     #define UBL_LAST_EEPROM_INDEX (E2END - sizeof(unified_bed_leveling::state))
 

Marlin/UBL_Bed_Leveling.cpp

@@ -27,6 +27,7 @@
 
   #include "UBL.h"
   #include "hex_print_routines.h"
+  extern int ubl_eeprom_start;
 
   /**
    * These support functions allow the use of large bit arrays of flags that take very

Marlin/UBL_G29.cpp

@@ -22,7 +22,7 @@
 
 #include "MarlinConfig.h"
 
-#if ENABLED(AUTO_BED_LEVELING_UBL)
+#if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(UBL_MESH_EDIT_ENABLED)
   //#include "vector_3.h"
   //#include "qr_solve.h"
 
@@ -39,7 +39,10 @@
   void lcd_return_to_status();
   bool lcd_clicked();
   void lcd_implementation_clear();
-
+  void lcd_mesh_edit_setup(float initial);
+  float lcd_mesh_edit();
+  void lcd_z_offset_edit_setup(float);
+  float lcd_z_offset_edit();
   extern float meshedit_done;
   extern long babysteps_done;
   extern float code_value_float();
@@ -62,6 +65,8 @@
   #define SIZE_OF_LITTLE_RAISE 0
   #define BIG_RAISE_NOT_NEEDED 0
   extern void lcd_quick_feedback();
+  extern int ubl_eeprom_start;
+  extern volatile int ubl_encoderDiff; // This is volatile because it is getting changed at interrupt time.
 
   /**
    *   G29: Unified Bed Leveling by Roxy

Marlin/UBL_line_to_destination.cpp

@@ -31,7 +31,8 @@
 
   extern float destination[XYZE];
   extern void set_current_to_destination();
-
+  extern float destination[];
+  bool g26_debug_flag = false;
   void debug_current_and_destination(char *title) {
 
     // if the title message starts with a '!' it is so important, we are going to

Marlin/configuration_store.cpp

@@ -166,6 +166,7 @@
 
 #if ENABLED(AUTO_BED_LEVELING_UBL)
   #include "UBL.h"
+  int ubl_eeprom_start = -1;
 #endif
 
 #if ENABLED(ABL_BILINEAR_SUBDIVISION)