forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #7165 from thinkyhead/bf_parser_shorthand

Browse Source 
Use parser.seenval, add shorthand functions
master
Scott Lahteine 8 years ago committed by GitHub
parent 66faedb2b8 bd776df8c1
commit f4246dc8ff
9 changed files with 294 additions and 276 deletions
Show Stats Download Patch File Download Diff File

22
Marlin/G26_Mesh_Validation_Tool.cpp
Unescape View File

@ -638,11 +638,11 @@
g26_hotend_temp = HOTEND_TEMP;
g26_prime_flag = 0;
g26_ooze_amount = parser.seen('O') && parser.has_value() ? parser.value_linear_units() : OOZE_AMOUNT;
g26_keep_heaters_on = parser.seen('K') && parser.value_bool();
g26_continue_with_closest = parser.seen('C') && parser.value_bool();
g26_ooze_amount = parser.linearval('O', OOZE_AMOUNT);
g26_keep_heaters_on = parser.boolval('K');
g26_continue_with_closest = parser.boolval('C');
if (parser.seen('B')) {
if (parser.seenval('B')) {
g26_bed_temp = parser.value_celsius();
if (!WITHIN(g26_bed_temp, 15, 140)) {
SERIAL_PROTOCOLLNPGM("?Specified bed temperature not plausible.");
@ -650,7 +650,7 @@
}
}
if (parser.seen('L')) {
if (parser.seenval('L')) {
g26_layer_height = parser.value_linear_units();
if (!WITHIN(g26_layer_height, 0.0, 2.0)) {
SERIAL_PROTOCOLLNPGM("?Specified layer height not plausible.");
@ -672,7 +672,7 @@
}
}
if (parser.seen('S')) {
if (parser.seenval('S')) {
g26_nozzle = parser.value_float();
if (!WITHIN(g26_nozzle, 0.1, 1.0)) {
SERIAL_PROTOCOLLNPGM("?Specified nozzle size not plausible.");
@ -699,7 +699,7 @@
}
}
if (parser.seen('F')) {
if (parser.seenval('F')) {
g26_filament_diameter = parser.value_linear_units();
if (!WITHIN(g26_filament_diameter, 1.0, 4.0)) {
SERIAL_PROTOCOLLNPGM("?Specified filament size not plausible.");
@ -712,7 +712,7 @@
g26_extrusion_multiplier *= g26_filament_diameter * sq(g26_nozzle) / sq(0.3); // Scale up by nozzle size
if (parser.seen('H')) {
if (parser.seenval('H')) {
g26_hotend_temp = parser.value_celsius();
if (!WITHIN(g26_hotend_temp, 165, 280)) {
SERIAL_PROTOCOLLNPGM("?Specified nozzle temperature not plausible.");
@ -727,7 +727,7 @@
}
#if ENABLED(NEWPANEL)
g26_repeats = parser.seen('R') && parser.has_value() ? parser.value_int() : GRID_MAX_POINTS + 1;
g26_repeats = parser.intval('R', GRID_MAX_POINTS + 1);
#else
if (!parser.seen('R')) {
SERIAL_PROTOCOLLNPGM("?(R)epeat must be specified when not using an LCD.");
@ -741,8 +741,8 @@
return UBL_ERR;
}
g26_x_pos = parser.seen('X') ? parser.value_linear_units() : current_position[X_AXIS];
g26_y_pos = parser.seen('Y') ? parser.value_linear_units() : current_position[Y_AXIS];
g26_x_pos = parser.linearval('X', current_position[X_AXIS]);
g26_y_pos = parser.linearval('Y', current_position[Y_AXIS]);
if (!position_is_reachable_xy(g26_x_pos, g26_y_pos)) {
SERIAL_PROTOCOLLNPGM("?Specified X,Y coordinate out of bounds.");
return UBL_ERR;

22
Marlin/M100_Free_Mem_Chk.cpp
Unescape View File

@ -189,19 +189,17 @@ void free_memory_pool_report(char * const ptr, const int16_t size) {
* This is useful to check the correctness of the M100 D and the M100 F commands.
*/
void corrupt_free_memory(char *ptr, const uint16_t size) {
if (parser.seen('C')) {
ptr += 8;
const uint16_t near_top = top_of_stack() - ptr - 250, // -250 to avoid interrupt activity that's altered the stack.
j = near_top / (size + 1);
SERIAL_ECHOLNPGM("Corrupting free memory block.\n");
for (uint16_t i = 1; i <= size; i++) {
char * const addr = ptr + i * j;
*addr = i;
SERIAL_ECHOPAIR("\nCorrupting address: ", hex_address(addr));
}
SERIAL_EOL();
ptr += 8;
const uint16_t near_top = top_of_stack() - ptr - 250, // -250 to avoid interrupt activity that's altered the stack.
j = near_top / (size + 1);
SERIAL_ECHOLNPGM("Corrupting free memory block.\n");
for (uint16_t i = 1; i <= size; i++) {
char * const addr = ptr + i * j;
*addr = i;
SERIAL_ECHOPAIR("\nCorrupting address: ", hex_address(addr));
}
SERIAL_EOL();
}
#endif // M100_FREE_MEMORY_CORRUPTOR

409
Marlin/Marlin_main.cpp
Unescape View File

@ -1276,16 +1276,17 @@ void get_available_commands() {
*
* Returns TRUE if the target is invalid
*/
bool get_target_extruder_from_command(int code) {
if (parser.seen('T')) {
if (parser.value_byte() >= EXTRUDERS) {
bool get_target_extruder_from_command(const uint16_t code) {
if (parser.seenval('T')) {
const int8_t e = parser.value_byte();
if (e >= EXTRUDERS) {
SERIAL_ECHO_START();
SERIAL_CHAR('M');
SERIAL_ECHO(code);
SERIAL_ECHOLNPAIR(" " MSG_INVALID_EXTRUDER " ", parser.value_byte());
SERIAL_ECHOLNPAIR(" " MSG_INVALID_EXTRUDER " ", e);
return true;
}
target_extruder = parser.value_byte();
target_extruder = e;
}
else
target_extruder = active_extruder;
@ -3134,7 +3135,7 @@ static void homeaxis(const AxisEnum axis) {
const char* mixing_codes = "ABCDHI";
byte mix_bits = 0;
for (uint8_t i = 0; i < MIXING_STEPPERS; i++) {
if (parser.seen(mixing_codes[i])) {
if (parser.seenval(mixing_codes[i])) {
SBI(mix_bits, i);
float v = parser.value_float();
NOLESS(v, 0.0);
@ -3174,7 +3175,7 @@ void gcode_get_destination() {
destination[i] = current_position[i];
}
if (parser.seen('F') && parser.value_linear_units() > 0.0)
if (parser.linearval('F') > 0.0)
feedrate_mm_s = MMM_TO_MMS(parser.value_feedrate());
#if ENABLED(PRINTCOUNTER)
@ -3303,7 +3304,7 @@ inline void gcode_G0_G1(
#endif
float arc_offset[2] = { 0.0, 0.0 };
if (parser.seen('R')) {
if (parser.seenval('R')) {
const float r = parser.value_linear_units(),
p1 = current_position[X_AXIS], q1 = current_position[Y_AXIS],
p2 = destination[X_AXIS], q2 = destination[Y_AXIS];
@ -3320,15 +3321,15 @@ inline void gcode_G0_G1(
}
}
else {
if (parser.seen('I')) arc_offset[0] = parser.value_linear_units();
if (parser.seen('J')) arc_offset[1] = parser.value_linear_units();
if (parser.seenval('I')) arc_offset[0] = parser.value_linear_units();
if (parser.seenval('J')) arc_offset[1] = parser.value_linear_units();
}
if (arc_offset[0] || arc_offset[1]) {
#if ENABLED(ARC_P_CIRCLES)
// P indicates number of circles to do
int8_t circles_to_do = parser.seen('P') ? parser.value_byte() : 0;
int8_t circles_to_do = parser.byteval('P');
if (!WITHIN(circles_to_do, 0, 100)) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_ARC_ARGS);
@ -3357,8 +3358,8 @@ inline void gcode_G0_G1(
inline void gcode_G4() {
millis_t dwell_ms = 0;
if (parser.seen('P')) dwell_ms = parser.value_millis(); // milliseconds to wait
if (parser.seen('S')) dwell_ms = parser.value_millis_from_seconds(); // seconds to wait
if (parser.seenval('P')) dwell_ms = parser.value_millis(); // milliseconds to wait
if (parser.seenval('S')) dwell_ms = parser.value_millis_from_seconds(); // seconds to wait
stepper.synchronize();
refresh_cmd_timeout();
@ -3387,10 +3388,10 @@ inline void gcode_G4() {
gcode_get_destination();
const float offset[] = {
parser.seen('I') ? parser.value_linear_units() : 0.0,
parser.seen('J') ? parser.value_linear_units() : 0.0,
parser.seen('P') ? parser.value_linear_units() : 0.0,
parser.seen('Q') ? parser.value_linear_units() : 0.0
parser.linearval('I'),
parser.linearval('J'),
parser.linearval('P'),
parser.linearval('Q')
};
plan_cubic_move(offset);
@ -3407,9 +3408,8 @@ inline void gcode_G4() {
*/
inline void gcode_G10_G11(bool doRetract=false) {
#if EXTRUDERS > 1
if (doRetract) {
retracted_swap[active_extruder] = (parser.seen('S') && parser.value_bool()); // checks for swap retract argument
}
if (doRetract)
retracted_swap[active_extruder] = parser.boolval('S'); // checks for swap retract argument
#endif
retract(doRetract
#if EXTRUDERS > 1
@ -3428,10 +3428,10 @@ inline void gcode_G4() {
// Don't allow nozzle cleaning without homing first
if (axis_unhomed_error()) return;
const uint8_t pattern = parser.seen('P') ? parser.value_ushort() : 0,
strokes = parser.seen('S') ? parser.value_ushort() : NOZZLE_CLEAN_STROKES,
objects = parser.seen('T') ? parser.value_ushort() : NOZZLE_CLEAN_TRIANGLES;
const float radius = parser.seen('R') ? parser.value_float() : NOZZLE_CLEAN_CIRCLE_RADIUS;
const uint8_t pattern = parser.ushortval('P', 0),
strokes = parser.ushortval('S', NOZZLE_CLEAN_STROKES),
objects = parser.ushortval('T', NOZZLE_CLEAN_TRIANGLES);
const float radius = parser.floatval('R', NOZZLE_CLEAN_CIRCLE_RADIUS);
Nozzle::clean(pattern, strokes, radius, objects);
}
@ -3475,7 +3475,7 @@ inline void gcode_G4() {
inline void gcode_G27() {
// Don't allow nozzle parking without homing first
if (axis_unhomed_error()) return;
Nozzle::park(parser.seen('P') ? parser.value_ushort() : 0);
Nozzle::park(parser.ushortval('P'));
}
#endif // NOZZLE_PARK_FEATURE
@ -4038,7 +4038,7 @@ void home_all_axes() { gcode_G28(true); }
static bool enable_soft_endstops;
#endif
const MeshLevelingState state = parser.seen('S') ? (MeshLevelingState)parser.value_byte() : MeshReport;
const MeshLevelingState state = (MeshLevelingState)parser.byteval('S', (int8_t)MeshReport);
if (!WITHIN(state, 0, 5)) {
SERIAL_PROTOCOLLNPGM("S out of range (0-5).");
return;
@ -4110,7 +4110,7 @@ void home_all_axes() { gcode_G28(true); }
break;
case MeshSet:
if (parser.seen('X')) {
if (parser.seenval('X')) {
px = parser.value_int() - 1;
if (!WITHIN(px, 0, GRID_MAX_POINTS_X - 1)) {
SERIAL_PROTOCOLLNPGM("X out of range (1-" STRINGIFY(GRID_MAX_POINTS_X) ").");
@ -4122,7 +4122,7 @@ void home_all_axes() { gcode_G28(true); }
return;
}
if (parser.seen('Y')) {
if (parser.seenval('Y')) {
py = parser.value_int() - 1;
if (!WITHIN(py, 0, GRID_MAX_POINTS_Y - 1)) {
SERIAL_PROTOCOLLNPGM("Y out of range (1-" STRINGIFY(GRID_MAX_POINTS_Y) ").");
@ -4134,7 +4134,7 @@ void home_all_axes() { gcode_G28(true); }
return;
}
if (parser.seen('Z')) {
if (parser.seenval('Z')) {
mbl.z_values[px][py] = parser.value_linear_units();
}
else {
@ -4144,7 +4144,7 @@ void home_all_axes() { gcode_G28(true); }
break;
case MeshSetZOffset:
if (parser.seen('Z')) {
if (parser.seenval('Z')) {
mbl.z_offset = parser.value_linear_units();
}
else {
@ -4268,7 +4268,7 @@ void home_all_axes() { gcode_G28(true); }
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE) && DISABLED(PROBE_MANUALLY)
const bool faux = parser.seen('C') && parser.value_bool();
const bool faux = parser.boolval('C');
#elif ENABLED(PROBE_MANUALLY)
const bool faux = no_action;
#else
@ -4370,17 +4370,17 @@ void home_all_axes() { gcode_G28(true); }
return;
}
const float z = parser.seen('Z') && parser.has_value() ? parser.value_float() : RAW_CURRENT_POSITION(Z);
const float z = parser.floatval('Z', RAW_CURRENT_POSITION(Z));
if (!WITHIN(z, -10, 10)) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM("Bad Z value");
return;
}
const float x = parser.seen('X') && parser.has_value() ? parser.value_float() : NAN,
y = parser.seen('Y') && parser.has_value() ? parser.value_float() : NAN;
int8_t i = parser.seen('I') && parser.has_value() ? parser.value_byte() : -1,
j = parser.seen('J') && parser.has_value() ? parser.value_byte() : -1;
const float x = parser.floatval('X', NAN),
y = parser.floatval('Y', NAN);
int8_t i = parser.byteval('I', -1),
j = parser.byteval('J', -1);
if (!isnan(x) && !isnan(y)) {
// Get nearest i / j from x / y
@ -4412,13 +4412,13 @@ void home_all_axes() { gcode_G28(true); }
#endif
verbose_level = parser.seen('V') && parser.has_value() ? parser.value_int() : 0;
verbose_level = parser.intval('V');
if (!WITHIN(verbose_level, 0, 4)) {
SERIAL_PROTOCOLLNPGM("?(V)erbose level is implausible (0-4).");
return;
}
dryrun = (parser.seen('D') && parser.value_bool())
dryrun = parser.boolval('D')
#if ENABLED(PROBE_MANUALLY)
|| no_action
#endif
@ -4426,13 +4426,13 @@ void home_all_axes() { gcode_G28(true); }
#if ENABLED(AUTO_BED_LEVELING_LINEAR)
do_topography_map = verbose_level > 2 || parser.seen('T');
do_topography_map = verbose_level > 2 || parser.boolval('T');
// X and Y specify points in each direction, overriding the default
// These values may be saved with the completed mesh
abl_grid_points_x = parser.seen('X') ? parser.value_int() : GRID_MAX_POINTS_X;
abl_grid_points_y = parser.seen('Y') ? parser.value_int() : GRID_MAX_POINTS_Y;
if (parser.seen('P')) abl_grid_points_x = abl_grid_points_y = parser.value_int();
abl_grid_points_x = parser.intval('X', GRID_MAX_POINTS_X);
abl_grid_points_y = parser.intval('Y', GRID_MAX_POINTS_Y);
if (parser.seenval('P')) abl_grid_points_x = abl_grid_points_y = parser.value_int();
if (abl_grid_points_x < 2 || abl_grid_points_y < 2) {
SERIAL_PROTOCOLLNPGM("?Number of probe points is implausible (2 minimum).");
@ -4443,18 +4443,18 @@ void home_all_axes() { gcode_G28(true); }
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
zoffset = parser.seen('Z') ? parser.value_linear_units() : 0;
zoffset = parser.linearval('Z');
#endif
#if ABL_GRID
xy_probe_feedrate_mm_s = MMM_TO_MMS(parser.seen('S') ? parser.value_linear_units() : XY_PROBE_SPEED);
xy_probe_feedrate_mm_s = MMM_TO_MMS(parser.linearval('S', XY_PROBE_SPEED));
left_probe_bed_position = parser.seen('L') ? (int)parser.value_linear_units() : LOGICAL_X_POSITION(LEFT_PROBE_BED_POSITION);
right_probe_bed_position = parser.seen('R') ? (int)parser.value_linear_units() : LOGICAL_X_POSITION(RIGHT_PROBE_BED_POSITION);
front_probe_bed_position = parser.seen('F') ? (int)parser.value_linear_units() : LOGICAL_Y_POSITION(FRONT_PROBE_BED_POSITION);
back_probe_bed_position = parser.seen('B') ? (int)parser.value_linear_units() : LOGICAL_Y_POSITION(BACK_PROBE_BED_POSITION);
left_probe_bed_position = (int)parser.linearval('L', LOGICAL_X_POSITION(LEFT_PROBE_BED_POSITION));
right_probe_bed_position = (int)parser.linearval('R', LOGICAL_X_POSITION(RIGHT_PROBE_BED_POSITION));
front_probe_bed_position = (int)parser.linearval('F', LOGICAL_Y_POSITION(FRONT_PROBE_BED_POSITION));
back_probe_bed_position = (int)parser.linearval('B', LOGICAL_Y_POSITION(BACK_PROBE_BED_POSITION));
const bool left_out_l = left_probe_bed_position < LOGICAL_X_POSITION(MIN_PROBE_X),
left_out = left_out_l || left_probe_bed_position > right_probe_bed_position - (MIN_PROBE_EDGE),
@ -4734,7 +4734,7 @@ void home_all_axes() { gcode_G28(true); }
#else // !PROBE_MANUALLY
const bool stow_probe_after_each = parser.seen('E');
const bool stow_probe_after_each = parser.boolval('E');
#if ABL_GRID
@ -5085,8 +5085,8 @@ void home_all_axes() { gcode_G28(true); }
* S0 Leave the probe deployed
*/
inline void gcode_G30() {
const float xpos = parser.seen('X') ? parser.value_linear_units() : current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER,
ypos = parser.seen('Y') ? parser.value_linear_units() : current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER;
const float xpos = parser.linearval('X', current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER),
ypos = parser.linearval('Y', current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER);
if (!position_is_reachable_by_probe_xy(xpos, ypos)) return;
@ -5097,7 +5097,7 @@ void home_all_axes() { gcode_G28(true); }
setup_for_endstop_or_probe_move();
const float measured_z = probe_pt(xpos, ypos, !parser.seen('S') || parser.value_bool(), 1);
const float measured_z = probe_pt(xpos, ypos, parser.boolval('S', true), 1);
if (!isnan(measured_z)) {
SERIAL_PROTOCOLPAIR("Bed X: ", FIXFLOAT(xpos));
@ -5163,32 +5163,32 @@ void home_all_axes() { gcode_G28(true); }
inline void gcode_G33() {
const int8_t probe_points = parser.seen('P') ? parser.value_int() : DELTA_CALIBRATION_DEFAULT_POINTS;
const int8_t probe_points = parser.intval('P', DELTA_CALIBRATION_DEFAULT_POINTS);
if (!WITHIN(probe_points, 1, 7)) {
SERIAL_PROTOCOLLNPGM("?(P)oints is implausible (1 to 7).");
return;
}
const int8_t verbose_level = parser.seen('V') ? parser.value_byte() : 1;
const int8_t verbose_level = parser.byteval('V', 1);
if (!WITHIN(verbose_level, 0, 2)) {
SERIAL_PROTOCOLLNPGM("?(V)erbose level is implausible (0-2).");
return;
}
const float calibration_precision = parser.seen('C') ? parser.value_float() : 0.0;
const float calibration_precision = parser.floatval('C');
if (calibration_precision < 0) {
SERIAL_PROTOCOLLNPGM("?(C)alibration precision is implausible (>0).");
return;
}
const int8_t force_iterations = parser.seen('F') ? parser.value_int() : 1;
const int8_t force_iterations = parser.intval('F', 1);
if (!WITHIN(force_iterations, 1, 30)) {
SERIAL_PROTOCOLLNPGM("?(F)orce iteration is implausible (1-30).");
return;
}
const bool towers_set = !parser.seen('T'),
stow_after_each = parser.seen('E') && parser.value_bool(),
const bool towers_set = !parser.boolval('T'),
stow_after_each = parser.boolval('E'),
_1p_calibration = probe_points == 1,
_4p_calibration = probe_points == 2,
_4p_towers_points = _4p_calibration && towers_set,
@ -5594,7 +5594,7 @@ void home_all_axes() { gcode_G28(true); }
// If any axis has enough movement, do the move
LOOP_XYZ(i)
if (FABS(destination[i] - current_position[i]) >= G38_MINIMUM_MOVE) {
if (!parser.seen('F')) feedrate_mm_s = homing_feedrate(i);
if (!parser.seenval('F')) feedrate_mm_s = homing_feedrate(i);
// If G38.2 fails throw an error
if (!G38_run_probe() && is_38_2) {
SERIAL_ERROR_START();
@ -5615,10 +5615,10 @@ void home_all_axes() { gcode_G28(true); }
*/
inline void gcode_G42() {
if (IsRunning()) {
const bool hasI = parser.seen('I');
const int8_t ix = parser.has_value() ? parser.value_int() : 0;
const bool hasJ = parser.seen('J');
const int8_t iy = parser.has_value() ? parser.value_int() : 0;
const bool hasI = parser.seenval('I');
const int8_t ix = hasI ? parser.value_int() : 0;
const bool hasJ = parser.seenval('J');
const int8_t iy = hasJ ? parser.value_int() : 0;
if ((hasI && !WITHIN(ix, 0, GRID_MAX_POINTS_X - 1)) || (hasJ && !WITHIN(iy, 0, GRID_MAX_POINTS_Y - 1))) {
SERIAL_ECHOLNPGM(MSG_ERR_MESH_XY);
@ -5639,13 +5639,13 @@ void home_all_axes() { gcode_G28(true); }
set_destination_to_current();
if (hasI) destination[X_AXIS] = LOGICAL_X_POSITION(_GET_MESH_X(ix));
if (hasJ) destination[Y_AXIS] = LOGICAL_Y_POSITION(_GET_MESH_Y(iy));
if (parser.seen('P') && parser.value_bool()) {
if (parser.boolval('P')) {
if (hasI) destination[X_AXIS] -= X_PROBE_OFFSET_FROM_EXTRUDER;
if (hasJ) destination[Y_AXIS] -= Y_PROBE_OFFSET_FROM_EXTRUDER;
}
if (parser.seen('F') && parser.value_linear_units() > 0.0)
feedrate_mm_s = MMM_TO_MMS(parser.value_linear_units());
const float fval = parser.linearval('F');
if (fval > 0.0) feedrate_mm_s = MMM_TO_MMS(fval);
// SCARA kinematic has "safe" XY raw moves
#if IS_SCARA
@ -5663,12 +5663,12 @@ void home_all_axes() { gcode_G28(true); }
*/
inline void gcode_G92() {
bool didXYZ = false,
didE = parser.seen('E');
didE = parser.seenval('E');
if (!didE) stepper.synchronize();
LOOP_XYZE(i) {
if (parser.seen(axis_codes[i])) {
if (parser.seenval(axis_codes[i])) {
#if IS_SCARA
current_position[i] = parser.value_axis_units((AxisEnum)i);
if (i != E_AXIS) didXYZ = true;
@ -5676,7 +5676,7 @@ inline void gcode_G92() {
#if HAS_POSITION_SHIFT
const float p = current_position[i];
#endif
float v = parser.value_axis_units((AxisEnum)i);
const float v = parser.value_axis_units((AxisEnum)i);
current_position[i] = v;
@ -5714,11 +5714,11 @@ inline void gcode_G92() {
millis_t ms = 0;
bool hasP = false, hasS = false;
if (parser.seen('P')) {
if (parser.seenval('P')) {
ms = parser.value_millis(); // milliseconds to wait
hasP = ms > 0;
}
if (parser.seen('S')) {
if (parser.seenval('S')) {
ms = parser.value_millis_from_seconds(); // seconds to wait
hasS = ms > 0;
}
@ -5850,7 +5850,7 @@ inline void gcode_G92() {
#if ENABLED(SPINDLE_LASER_PWM)
if (parser.seen('O')) ocr_val_mode();
else {
const float spindle_laser_power = parser.seen('S') ? parser.value_float() : 0;
const float spindle_laser_power = parser.floatval('S');
if (spindle_laser_power == 0) {
WRITE(SPINDLE_LASER_ENABLE_PIN, !SPINDLE_LASER_ENABLE_INVERT); // turn spindle off (active low)
delay_for_power_down();
@ -6271,7 +6271,7 @@ inline void gcode_M17() {
* M26: Set SD Card file index
*/
inline void gcode_M26() {
if (card.cardOK && parser.seen('S'))
if (card.cardOK && parser.seenval('S'))
card.setIndex(parser.value_long());
}
@ -6328,12 +6328,12 @@ inline void gcode_M31() {
stepper.synchronize();
char* namestartpos = parser.string_arg;
bool call_procedure = parser.seen('P');
const bool call_procedure = parser.boolval('P');
if (card.cardOK) {
card.openFile(namestartpos, true, call_procedure);
if (parser.seen('S'))
if (parser.seenval('S'))
card.setIndex(parser.value_long());
card.startFileprint();
@ -6369,8 +6369,8 @@ inline void gcode_M31() {
*/
inline void gcode_M34() {
if (parser.seen('S')) card.setSortOn(parser.value_bool());
if (parser.seen('F')) {
int v = parser.value_long();
if (parser.seenval('F')) {
const int v = parser.value_long();
card.setSortFolders(v < 0 ? -1 : v > 0 ? 1 : 0);
}
//if (parser.seen('R')) card.setSortReverse(parser.value_bool());
@ -6403,12 +6403,10 @@ static bool pin_is_protected(const int8_t pin) {
* S<byte> Pin status from 0 - 255
*/
inline void gcode_M42() {
if (!parser.seen('S')) return;
int pin_status = parser.value_int();
if (!WITHIN(pin_status, 0, 255)) return;
if (!parser.seenval('S')) return;
const byte pin_status = parser.value_byte();
int pin_number = parser.seen('P') ? parser.value_int() : LED_PIN;
const int pin_number = parser.intval('P', LED_PIN);
if (pin_number < 0) return;
if (pin_is_protected(pin_number)) {
@ -6441,11 +6439,11 @@ inline void gcode_M42() {
#include "pinsDebug.h"
inline void toggle_pins() {
const bool I_flag = parser.seen('I') && parser.value_bool();
const int repeat = parser.seen('R') ? parser.value_int() : 1,
start = parser.seen('S') ? parser.value_int() : 0,
end = parser.seen('E') ? parser.value_int() : NUM_DIGITAL_PINS - 1,
wait = parser.seen('W') ? parser.value_int() : 500;
const bool I_flag = parser.boolval('I');
const int repeat = parser.intval('R', 1),
start = parser.intval('S'),
end = parser.intval('E', NUM_DIGITAL_PINS - 1),
wait = parser.intval('W', 500);
for (uint8_t pin = start; pin <= end; pin++) {
//report_pin_state_extended(pin, I_flag, false);
@ -6504,7 +6502,7 @@ inline void gcode_M42() {
#else
const uint8_t probe_index = parser.seen('P') ? parser.value_byte() : Z_ENDSTOP_SERVO_NR;
const uint8_t probe_index = parser.byteval('P', Z_ENDSTOP_SERVO_NR);
SERIAL_PROTOCOLLNPGM("Servo probe test");
SERIAL_PROTOCOLLNPAIR(". using index: ", probe_index);
@ -6645,7 +6643,7 @@ inline void gcode_M42() {
*/
inline void gcode_M43() {
if (parser.seen('T')) { // must be first or else it's "S" and "E" parameters will execute endstop or servo test
if (parser.seen('T')) { // must be first or else its "S" and "E" parameters will execute endstop or servo test
toggle_pins();
return;
}
@ -6665,15 +6663,15 @@ inline void gcode_M42() {
}
// Get the range of pins to test or watch
const uint8_t first_pin = parser.seen('P') ? parser.value_byte() : 0,
last_pin = parser.seen('P') ? first_pin : NUM_DIGITAL_PINS - 1;
const uint8_t first_pin = parser.byteval('P'),
last_pin = parser.seenval('P') ? first_pin : NUM_DIGITAL_PINS - 1;
if (first_pin > last_pin) return;
const bool ignore_protection = parser.seen('I') && parser.value_bool();
const bool ignore_protection = parser.boolval('I');
// Watch until click, M108, or reset
if (parser.seen('W') && parser.value_bool()) {
if (parser.boolval('W')) {
SERIAL_PROTOCOLLNPGM("Watching pins");
byte pin_state[last_pin - first_pin + 1];
for (int8_t pin = first_pin; pin <= last_pin; pin++) {
@ -6752,7 +6750,7 @@ inline void gcode_M42() {
if (axis_unhomed_error()) return;
const int8_t verbose_level = parser.seen('V') ? parser.value_byte() : 1;
const int8_t verbose_level = parser.byteval('V', 1);
if (!WITHIN(verbose_level, 0, 4)) {
SERIAL_PROTOCOLLNPGM("?(V)erbose level is implausible (0-4).");
return;
@ -6761,19 +6759,19 @@ inline void gcode_M42() {
if (verbose_level > 0)
SERIAL_PROTOCOLLNPGM("M48 Z-Probe Repeatability Test");
int8_t n_samples = parser.seen('P') ? parser.value_byte() : 10;
const int8_t n_samples = parser.byteval('P', 10);
if (!WITHIN(n_samples, 4, 50)) {
SERIAL_PROTOCOLLNPGM("?Sample size not plausible (4-50).");
return;
}
const bool stow_probe_after_each = parser.seen('E');
const bool stow_probe_after_each = parser.boolval('E');
float X_current = current_position[X_AXIS],
Y_current = current_position[Y_AXIS];
const float X_probe_location = parser.seen('X') ? parser.value_linear_units() : X_current + X_PROBE_OFFSET_FROM_EXTRUDER,
Y_probe_location = parser.seen('Y') ? parser.value_linear_units() : Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER;
const float X_probe_location = parser.linearval('X', X_current + X_PROBE_OFFSET_FROM_EXTRUDER),
Y_probe_location = parser.linearval('Y', Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER);
#if DISABLED(DELTA)
if (!WITHIN(X_probe_location, LOGICAL_X_POSITION(MIN_PROBE_X), LOGICAL_X_POSITION(MAX_PROBE_X))) {
@ -6799,7 +6797,7 @@ inline void gcode_M42() {
}
if (n_legs == 1) n_legs = 2;
bool schizoid_flag = parser.seen('S');
const bool schizoid_flag = parser.boolval('S');
if (schizoid_flag && !seen_L) n_legs = 7;
/**
@ -7007,7 +7005,7 @@ inline void gcode_M77() { print_job_timer.stop(); }
*/
inline void gcode_M78() {
// "M78 S78" will reset the statistics
if (parser.seen('S') && parser.value_int() == 78)
if (parser.intval('S') == 78)
print_job_timer.initStats();
else
print_job_timer.showStats();
@ -7025,7 +7023,7 @@ inline void gcode_M104() {
if (target_extruder != active_extruder) return;
#endif
if (parser.seen('S')) {
if (parser.seenval('S')) {
const int16_t temp = parser.value_celsius();
thermalManager.setTargetHotend(temp, target_extruder);
@ -7152,7 +7150,7 @@ inline void gcode_M105() {
* M155: Set temperature auto-report interval. M155 S<seconds>
*/
inline void gcode_M155() {
if (parser.seen('S')) {
if (parser.seenval('S')) {
auto_report_temp_interval = parser.value_byte();
NOMORE(auto_report_temp_interval, 60);
next_temp_report_ms = millis() + 1000UL * auto_report_temp_interval;
@ -7178,9 +7176,9 @@ inline void gcode_M105() {
* P<index> Fan index, if more than one fan
*/
inline void gcode_M106() {
uint16_t s = parser.seen('S') ? parser.value_ushort() : 255,
p = parser.seen('P') ? parser.value_ushort() : 0;
uint16_t s = parser.ushortval('S', 255);
NOMORE(s, 255);
const uint8_t p = parser.byteval('P', 0);
if (p < FAN_COUNT) fanSpeeds[p] = s;
}
@ -7188,7 +7186,7 @@ inline void gcode_M105() {
* M107: Fan Off
*/
inline void gcode_M107() {
uint16_t p = parser.seen('P') ? parser.value_ushort() : 0;
const uint16_t p = parser.ushortval('P');
if (p < FAN_COUNT) fanSpeeds[p] = 0;
}
@ -7239,8 +7237,8 @@ inline void gcode_M109() {
if (target_extruder != active_extruder) return;
#endif
const bool no_wait_for_cooling = parser.seen('S');
if (no_wait_for_cooling || parser.seen('R')) {
const bool no_wait_for_cooling = parser.seenval('S');
if (no_wait_for_cooling || parser.seenval('R')) {
const int16_t temp = parser.value_celsius();
thermalManager.setTargetHotend(temp, target_extruder);
@ -7388,8 +7386,8 @@ inline void gcode_M109() {
if (DEBUGGING(DRYRUN)) return;
LCD_MESSAGEPGM(MSG_BED_HEATING);
const bool no_wait_for_cooling = parser.seen('S');
if (no_wait_for_cooling || parser.seen('R')) {
const bool no_wait_for_cooling = parser.seenval('S');
if (no_wait_for_cooling || parser.seenval('R')) {
thermalManager.setTargetBed(parser.value_celsius());
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
if (parser.value_celsius() > BED_MINTEMP)
@ -7496,14 +7494,14 @@ inline void gcode_M109() {
* M110: Set Current Line Number
*/
inline void gcode_M110() {
if (parser.seen('N')) gcode_LastN = parser.value_long();
if (parser.seenval('N')) gcode_LastN = parser.value_long();
}
/**
* M111: Set the debug level
*/
inline void gcode_M111() {
marlin_debug_flags = parser.seen('S') ? parser.value_byte() : (uint8_t)DEBUG_NONE;
marlin_debug_flags = parser.byteval('S', (uint8_t)DEBUG_NONE);
const static char str_debug_1[] PROGMEM = MSG_DEBUG_ECHO;
const static char str_debug_2[] PROGMEM = MSG_DEBUG_INFO;
@ -7546,7 +7544,7 @@ inline void gcode_M111() {
* S<seconds> Optional. Set the keepalive interval.
*/
inline void gcode_M113() {
if (parser.seen('S')) {
if (parser.seenval('S')) {
host_keepalive_interval = parser.value_byte();
NOMORE(host_keepalive_interval, 60);
}
@ -7564,7 +7562,7 @@ inline void gcode_M111() {
/**
* M126: Heater 1 valve open
*/
inline void gcode_M126() { baricuda_valve_pressure = parser.seen('S') ? parser.value_byte() : 255; }
inline void gcode_M126() { baricuda_valve_pressure = parser.byteval('S', 255); }
/**
* M127: Heater 1 valve close
*/
@ -7575,7 +7573,7 @@ inline void gcode_M111() {
/**
* M128: Heater 2 valve open
*/
inline void gcode_M128() { baricuda_e_to_p_pressure = parser.seen('S') ? parser.value_byte() : 255; }
inline void gcode_M128() { baricuda_e_to_p_pressure = parser.byteval('S', 255); }
/**
* M129: Heater 2 valve close
*/
@ -7589,7 +7587,7 @@ inline void gcode_M111() {
*/
inline void gcode_M140() {
if (DEBUGGING(DRYRUN)) return;
if (parser.seen('S')) thermalManager.setTargetBed(parser.value_celsius());
if (parser.seenval('S')) thermalManager.setTargetBed(parser.value_celsius());
}
#if ENABLED(ULTIPANEL)
@ -7603,23 +7601,23 @@ inline void gcode_M140() {
* F<fan speed>
*/
inline void gcode_M145() {
uint8_t material = parser.seen('S') ? (uint8_t)parser.value_int() : 0;
const uint8_t material = (uint8_t)parser.intval('S');
if (material >= COUNT(lcd_preheat_hotend_temp)) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_MATERIAL_INDEX);
}
else {
int v;
if (parser.seen('H')) {
if (parser.seenval('H')) {
v = parser.value_int();
lcd_preheat_hotend_temp[material] = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
}
if (parser.seen('F')) {
if (parser.seenval('F')) {
v = parser.value_int();
lcd_preheat_fan_speed[material] = constrain(v, 0, 255);
}
#if TEMP_SENSOR_BED != 0
if (parser.seen('B')) {
if (parser.seenval('B')) {
v = parser.value_int();
lcd_preheat_bed_temp[material] = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
}
@ -7634,9 +7632,9 @@ inline void gcode_M140() {
* M149: Set temperature units
*/
inline void gcode_M149() {
if (parser.seen('C')) parser.set_input_temp_units(TEMPUNIT_C);
else if (parser.seen('K')) parser.set_input_temp_units(TEMPUNIT_K);
else if (parser.seen('F')) parser.set_input_temp_units(TEMPUNIT_F);
if (parser.seenval('C')) parser.set_input_temp_units(TEMPUNIT_C);
else if (parser.seenval('K')) parser.set_input_temp_units(TEMPUNIT_K);
else if (parser.seenval('F')) parser.set_input_temp_units(TEMPUNIT_F);
}
#endif
@ -7725,7 +7723,7 @@ inline void gcode_M83() { axis_relative_modes[E_AXIS] = true; }
* M18, M84: Disable stepper motors
*/
inline void gcode_M18_M84() {
if (parser.seen('S')) {
if (parser.seenval('S')) {
stepper_inactive_time = parser.value_millis_from_seconds();
}
else {
@ -8035,16 +8033,14 @@ inline void gcode_M121() { endstops.enable_globally(false); }
;
// Lift Z axis
const float z_lift = parser.seen('Z') ? parser.value_linear_units() :
#if defined(PAUSE_PARK_Z_ADD) && PAUSE_PARK_Z_ADD > 0
PAUSE_PARK_Z_ADD
#else
0
const float z_lift = parser.linearval('Z')
#if PAUSE_PARK_Z_ADD > 0
+ PAUSE_PARK_Z_ADD
#endif
;
// Move XY axes to filament change position or given position
const float x_pos = parser.seen('X') ? parser.value_linear_units() : 0
const float x_pos = parser.linearval('X')
#ifdef PAUSE_PARK_X_POS
+ PAUSE_PARK_X_POS
#endif
@ -8052,7 +8048,7 @@ inline void gcode_M121() { endstops.enable_globally(false); }
+ (active_extruder ? hotend_offset[X_AXIS][active_extruder] : 0)
#endif
;
const float y_pos = parser.seen('Y') ? parser.value_linear_units() : 0
const float y_pos = parser.linearval('Y')
#ifdef PAUSE_PARK_Y_POS
+ PAUSE_PARK_Y_POS
#endif
@ -8268,10 +8264,10 @@ inline void gcode_M205() {
home_offset[Z_AXIS] = parser.value_linear_units() - DELTA_HEIGHT;
update_software_endstops(Z_AXIS);
}
if (parser.seen('L')) delta_diagonal_rod = parser.value_linear_units();
if (parser.seen('R')) delta_radius = parser.value_linear_units();
if (parser.seen('S')) delta_segments_per_second = parser.value_float();
if (parser.seen('B')) delta_calibration_radius = parser.value_float();
if (parser.seen('L')) delta_diagonal_rod = parser.value_linear_units();
if (parser.seen('R')) delta_radius = parser.value_linear_units();
if (parser.seen('S')) delta_segments_per_second = parser.value_float();
if (parser.seen('B')) delta_calibration_radius = parser.value_float();
if (parser.seen('X')) delta_tower_angle_trim[A_AXIS] = parser.value_float();
if (parser.seen('Y')) delta_tower_angle_trim[B_AXIS] = parser.value_float();
if (parser.seen('Z')) { // rotate all 3 axis for Z = 0
@ -8447,11 +8443,11 @@ inline void gcode_M211() {
inline void gcode_M218() {
if (get_target_extruder_from_command(218) || target_extruder == 0) return;
if (parser.seen('X')) hotend_offset[X_AXIS][target_extruder] = parser.value_linear_units();
if (parser.seen('Y')) hotend_offset[Y_AXIS][target_extruder] = parser.value_linear_units();
if (parser.seenval('X')) hotend_offset[X_AXIS][target_extruder] = parser.value_linear_units();
if (parser.seenval('Y')) hotend_offset[Y_AXIS][target_extruder] = parser.value_linear_units();
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_NOZZLE)
if (parser.seen('Z')) hotend_offset[Z_AXIS][target_extruder] = parser.value_linear_units();
if (parser.seenval('Z')) hotend_offset[Z_AXIS][target_extruder] = parser.value_linear_units();
#endif
SERIAL_ECHO_START();
@ -8475,7 +8471,7 @@ inline void gcode_M211() {
* M220: Set speed percentage factor, aka "Feed Rate" (M220 S95)
*/
inline void gcode_M220() {
if (parser.seen('S')) feedrate_percentage = parser.value_int();
if (parser.seenval('S')) feedrate_percentage = parser.value_int();
}
/**
@ -8483,7 +8479,7 @@ inline void gcode_M220() {
*/
inline void gcode_M221() {
if (get_target_extruder_from_command(221)) return;
if (parser.seen('S'))
if (parser.seenval('S'))
flow_percentage[target_extruder] = parser.value_int();
}
@ -8492,10 +8488,10 @@ inline void gcode_M221() {
*/
inline void gcode_M226() {
if (parser.seen('P')) {
int pin_number = parser.value_int(),
pin_state = parser.seen('S') ? parser.value_int() : -1; // required pin state - default is inverted
const int pin_number = parser.value_int(),
pin_state = parser.intval('S', -1); // required pin state - default is inverted
if (pin_state >= -1 && pin_state <= 1 && pin_number > -1 && !pin_is_protected(pin_number)) {
if (WITHIN(pin_state, -1, 1) && pin_number > -1 && !pin_is_protected(pin_number)) {
int target = LOW;
@ -8560,7 +8556,7 @@ inline void gcode_M226() {
inline void gcode_M261() {
if (parser.seen('A')) i2c.address(parser.value_byte());
uint8_t bytes = parser.seen('B') ? parser.value_byte() : 1;
uint8_t bytes = parser.byteval('B', 1);
if (i2c.addr && bytes && bytes <= TWIBUS_BUFFER_SIZE) {
i2c.relay(bytes);
@ -8580,7 +8576,7 @@ inline void gcode_M226() {
*/
inline void gcode_M280() {
if (!parser.seen('P')) return;
int servo_index = parser.value_int();
const int servo_index = parser.value_int();
if (WITHIN(servo_index, 0, NUM_SERVOS - 1)) {
if (parser.seen('S'))
MOVE_SERVO(servo_index, parser.value_int());
@ -8605,8 +8601,8 @@ inline void gcode_M226() {
* M300: Play beep sound S<frequency Hz> P<duration ms>
*/
inline void gcode_M300() {
uint16_t const frequency = parser.seen('S') ? parser.value_ushort() : 260;
uint16_t duration = parser.seen('P') ? parser.value_ushort() : 1000;
uint16_t const frequency = parser.ushortval('S', 260);
uint16_t duration = parser.ushortval('P', 1000);
// Limits the tone duration to 0-5 seconds.
NOMORE(duration, 5000);
@ -8634,7 +8630,7 @@ inline void gcode_M226() {
// multi-extruder PID patch: M301 updates or prints a single extruder's PID values
// default behaviour (omitting E parameter) is to update for extruder 0 only
int e = parser.seen('E') ? parser.value_int() : 0; // extruder being updated
const uint8_t e = parser.byteval('E'); // extruder being updated
if (e < HOTENDS) { // catch bad input value
if (parser.seen('P')) PID_PARAM(Kp, e) = parser.value_float();
@ -8753,7 +8749,7 @@ inline void gcode_M226() {
* M302 S170 P1 ; set min extrude temp to 170 but leave disabled
*/
inline void gcode_M302() {
bool seen_S = parser.seen('S');
const bool seen_S = parser.seen('S');
if (seen_S) {
thermalManager.extrude_min_temp = parser.value_celsius();
thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0);
@ -8782,11 +8778,10 @@ inline void gcode_M226() {
*/
inline void gcode_M303() {
#if HAS_PID_HEATING
const int e = parser.seen('E') ? parser.value_int() : 0,
c = parser.seen('C') ? parser.value_int() : 5;
const bool u = parser.seen('U') && parser.value_bool();
const int e = parser.intval('E'), c = parser.intval('C', 5);
const bool u = parser.boolval('U');
int16_t temp = parser.seen('S') ? parser.value_celsius() : (e < 0 ? 70 : 150);
int16_t temp = parser.celsiusval('S', e < 0 ? 70 : 150);
if (WITHIN(e, 0, HOTENDS - 1))
target_extruder = e;
@ -8960,10 +8955,12 @@ inline void gcode_M400() { stepper.synchronize(); }
* M405: Turn on filament sensor for control
*/
inline void gcode_M405() {
// This is technically a linear measurement, but since it's quantized to centimeters and is a different unit than
// everything else, it uses parser.value_int() instead of parser.value_linear_units().
if (parser.seen('D')) meas_delay_cm = parser.value_byte();
NOMORE(meas_delay_cm, MAX_MEASUREMENT_DELAY);
// This is technically a linear measurement, but since it's quantized to centimeters and is a different
// unit than everything else, it uses parser.value_byte() instead of parser.value_linear_units().
if (parser.seen('D')) {
meas_delay_cm = parser.value_byte();
NOMORE(meas_delay_cm, MAX_MEASUREMENT_DELAY);
}
if (filwidth_delay_index[1] == -1) { // Initialize the ring buffer if not done since startup
const uint8_t temp_ratio = thermalManager.widthFil_to_size_ratio() - 100; // -100 to scale within a signed byte
@ -9077,11 +9074,9 @@ void quickstop_stepper() {
#endif
}
bool to_enable = false;
if (parser.seen('S')) {
to_enable = parser.value_bool();
const bool to_enable = parser.boolval('S');
if (parser.seen('S'))
set_bed_leveling_enabled(to_enable);
}
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
if (parser.seen('Z')) set_z_fade_height(parser.value_linear_units());
@ -9148,11 +9143,12 @@ void quickstop_stepper() {
* M421 I<xindex> J<yindex> Q<offset>
*/
inline void gcode_M421() {
const bool hasI = parser.seen('I');
const int8_t ix = hasI ? parser.value_int() : -1;
const bool hasJ = parser.seen('J');
const int8_t iy = hasJ ? parser.value_int() : -1;
const bool hasZ = parser.seen('Z'), hasQ = !hasZ && parser.seen('Q');
int8_t ix = parser.intval('I', -1), iy = parser.intval('J', -1);
const bool hasI = ix >= 0,
hasJ = iy >= 0,
hasC = parser.seen('C'),
hasZ = parser.seen('Z'),
hasQ = !hasZ && parser.seen('Q');
if (!hasI || !hasJ || !(hasZ || hasQ)) {
SERIAL_ERROR_START();
@ -9182,11 +9178,12 @@ void quickstop_stepper() {
* M421 C Q<offset>
*/
inline void gcode_M421() {
const bool hasC = parser.seen('C'), hasI = parser.seen('I');
int8_t ix = hasI ? parser.value_int() : -1;
const bool hasJ = parser.seen('J');
int8_t iy = hasJ ? parser.value_int() : -1;
const bool hasZ = parser.seen('Z'), hasQ = !hasZ && parser.seen('Q');
int8_t ix = parser.intval('I', -1), iy = parser.intval('J', -1);
const bool hasI = ix >= 0,
hasJ = iy >= 0,
hasC = parser.seen('C'),
hasZ = parser.seen('Z'),
hasQ = !hasZ && parser.seen('Q');
if (hasC) {
const mesh_index_pair location = ubl.find_closest_mesh_point_of_type(REAL, current_position[X_AXIS], current_position[Y_AXIS], USE_NOZZLE_AS_REFERENCE, NULL, false);
@ -9277,7 +9274,7 @@ inline void gcode_M502() {
* M503: print settings currently in memory
*/
inline void gcode_M503() {
(void)settings.report(parser.seen('S') && !parser.value_bool());
(void)settings.report(!parser.boolval('S', true));
}
#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
@ -9381,25 +9378,23 @@ inline void gcode_M503() {
;
// Lift Z axis
const float z_lift = parser.seen('Z') ? parser.value_linear_units() :
const float z_lift = parser.linearval('Z', 0
#if defined(PAUSE_PARK_Z_ADD) && PAUSE_PARK_Z_ADD > 0
PAUSE_PARK_Z_ADD
#else
0
+ PAUSE_PARK_Z_ADD
#endif
;
);
// Move XY axes to filament exchange position
const float x_pos = parser.seen('X') ? parser.value_linear_units() : 0
const float x_pos = parser.linearval('X', 0
#ifdef PAUSE_PARK_X_POS
+ PAUSE_PARK_X_POS
#endif
;
const float y_pos = parser.seen('Y') ? parser.value_linear_units() : 0
);
const float y_pos = parser.linearval('Y', 0
#ifdef PAUSE_PARK_Y_POS
+ PAUSE_PARK_Y_POS
#endif
;
);
// Unload filament
const float unload_length = parser.seen('U') ? parser.value_axis_units(E_AXIS) : 0
@ -9415,13 +9410,13 @@ inline void gcode_M503() {
#endif
;
const int beep_count = parser.seen('B') ? parser.value_int() :
const int beep_count = parser.intval('B',
#ifdef FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS
FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS
#else
-1
#endif
;
);
const bool job_running = print_job_timer.isRunning();
@ -9517,7 +9512,7 @@ inline void gcode_M503() {
inline void gcode_M605() {
stepper.synchronize();
extruder_duplication_enabled = parser.seen('S') && parser.value_int() == (int)DXC_DUPLICATION_MODE;
extruder_duplication_enabled = parser.intval('S') == (int)DXC_DUPLICATION_MODE;
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(MSG_DUPLICATION_MODE, extruder_duplication_enabled ? MSG_ON : MSG_OFF);
}
@ -9535,14 +9530,14 @@ inline void gcode_M503() {
inline void gcode_M900() {
stepper.synchronize();
const float newK = parser.seen('K') ? parser.value_float() : -1;
const float newK = parser.floatval('K', -1);
if (newK >= 0) planner.extruder_advance_k = newK;
float newR = parser.seen('R') ? parser.value_float() : -1;
float newR = parser.floatval('R', -1);
if (newR < 0) {
const float newD = parser.seen('D') ? parser.value_float() : -1,
newW = parser.seen('W') ? parser.value_float() : -1,
newH = parser.seen('H') ? parser.value_float() : -1;
const float newD = parser.floatval('D', -1),
newW = parser.floatval('W', -1),
newH = parser.floatval('H', -1);
if (newD >= 0 && newW >= 0 && newH >= 0)
newR = newD ? (newW * newH) / (sq(newD * 0.5) * M_PI) : 0;
}
@ -9611,7 +9606,7 @@ inline void gcode_M503() {
inline void gcode_M906() {
uint16_t values[XYZE];
LOOP_XYZE(i)
values[i] = parser.seen(axis_codes[i]) ? parser.value_int() : 0;
values[i] = parser.intval(axis_codes[i]);
#if ENABLED(X_IS_TMC2130)
if (values[X_AXIS]) tmc2130_set_current(stepperX, 'X', values[X_AXIS]);
@ -9683,7 +9678,7 @@ inline void gcode_M503() {
inline void gcode_M913() {
uint16_t values[XYZE];
LOOP_XYZE(i)
values[i] = parser.seen(axis_codes[i]) ? parser.value_int() : 0;
values[i] = parser.intval(axis_codes[i]);
#if ENABLED(X_IS_TMC2130)
if (values[X_AXIS]) tmc2130_set_pwmthrs(stepperX, 'X', values[X_AXIS], planner.axis_steps_per_mm[X_AXIS]);
@ -9770,14 +9765,14 @@ inline void gcode_M907() {
inline void gcode_M908() {
#if HAS_DIGIPOTSS
stepper.digitalPotWrite(
parser.seen('P') ? parser.value_int() : 0,
parser.seen('S') ? parser.value_int() : 0
parser.intval('P'),
parser.intval('S')
);
#endif
#ifdef DAC_STEPPER_CURRENT
dac_current_raw(
parser.seen('P') ? parser.value_byte() : -1,
parser.seen('S') ? parser.value_ushort() : 0
parser.byteval('P', -1),
parser.ushortval('S', 0)
);
#endif
}
@ -9807,14 +9802,14 @@ inline void gcode_M907() {
* S# determines MS1 or MS2, X# sets the pin high/low.
*/
inline void gcode_M351() {
if (parser.seen('S')) switch (parser.value_byte()) {
if (parser.seenval('S')) switch (parser.value_byte()) {
case 1:
LOOP_XYZE(i) if (parser.seen(axis_codes[i])) stepper.microstep_ms(i, parser.value_byte(), -1);
if (parser.seen('B')) stepper.microstep_ms(4, parser.value_byte(), -1);
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, parser.value_byte(), -1);
if (parser.seenval('B')) stepper.microstep_ms(4, parser.value_byte(), -1);
break;
case 2:
LOOP_XYZE(i) if (parser.seen(axis_codes[i])) stepper.microstep_ms(i, -1, parser.value_byte());
if (parser.seen('B')) stepper.microstep_ms(4, -1, parser.value_byte());
LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, -1, parser.value_byte());
if (parser.seenval('B')) stepper.microstep_ms(4, -1, parser.value_byte());
break;
}
stepper.microstep_readings();
@ -9857,8 +9852,8 @@ inline void gcode_M907() {
inline void gcode_M355() {
#if HAS_CASE_LIGHT
uint8_t args = 0;
if (parser.seen('P')) ++args, case_light_brightness = parser.value_byte();
if (parser.seen('S')) ++args, case_light_on = parser.value_bool();
if (parser.seenval('P')) ++args, case_light_brightness = parser.value_byte();
if (parser.seenval('S')) ++args, case_light_on = parser.value_bool();
if (args) update_case_light();
// always report case light status
@ -9888,9 +9883,9 @@ inline void gcode_M355() {
*
*/
inline void gcode_M163() {
const int mix_index = parser.seen('S') ? parser.value_int() : 0;
const int mix_index = parser.intval('S');
if (mix_index < MIXING_STEPPERS) {
float mix_value = parser.seen('P') ? parser.value_float() : 0.0;
float mix_value = parser.floatval('P');
NOLESS(mix_value, 0.0);
mixing_factor[mix_index] = RECIPROCAL(mix_value);
}
@ -9905,7 +9900,7 @@ inline void gcode_M355() {
*
*/
inline void gcode_M164() {
const int tool_index = parser.seen('S') ? parser.value_int() : 0;
const int tool_index = parser.intval('S');
if (tool_index < MIXING_VIRTUAL_TOOLS) {
normalize_mix();
for (uint8_t i = 0; i < MIXING_STEPPERS; i++)
@ -9948,7 +9943,7 @@ inline void gcode_M999() {
Running = true;
lcd_reset_alert_level();
if (parser.seen('S') && parser.value_bool()) return;
if (parser.boolval('S')) return;
// gcode_LastN = Stopped_gcode_LastN;
FlushSerialRequestResend();
@ -10339,8 +10334,8 @@ inline void gcode_T(uint8_t tmp_extruder) {
tool_change(
tmp_extruder,
parser.seen('F') ? MMM_TO_MMS(parser.value_linear_units()) : 0.0,
(tmp_extruder == active_extruder) || (parser.seen('S') && parser.value_bool())
MMM_TO_MMS(parser.linearval('F')),
(tmp_extruder == active_extruder) || parser.boolval('S')
);
#endif

2
Marlin/SdFatStructs.h
Unescape View File

@ -523,7 +523,7 @@ struct directoryEntry {
uint8_t reservedNT;
/**
* The granularity of the seconds part of creationTime is 2 seconds
* so this field is a count of tenths of a second and its valid
* so this field is a count of tenths of a second and it's valid
* value range is 0-199 inclusive. (WHG note - seems to be hundredths)
*/
uint8_t creationTimeTenths;

2
Marlin/example_configurations/K8400/README.md
Unescape View File

@ -2,7 +2,7 @@
http://www.k8400.eu/
Configuration files for the K8400, ported upstream from the official Velleman firmware.
Like it's predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h.
Like its predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h.
Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /Marlin/ directory.

77
Marlin/gcode.h
Unescape View File

@ -97,6 +97,13 @@ public:
// Reset is done before parsing
static void reset();
// Index so that 'X' falls on index 24
#define PARAM_IND(N) ((N) >> 3)
#define PARAM_BIT(N) ((N) & 0x7)
#define LETTER_OFF(N) ((N) - 'A' + 1)
#define LETTER_IND(N) PARAM_IND(LETTER_OFF(N))
#define LETTER_BIT(N) PARAM_BIT(LETTER_OFF(N))
#if ENABLED(FASTER_GCODE_PARSER)
// Set the flag and pointer for a parameter
@ -105,14 +112,14 @@ public:
, const bool debug=false
#endif
) {
const uint8_t ind = c - 'A';
const uint8_t ind = LETTER_OFF(c);
if (ind >= COUNT(param)) return; // Only A-Z
SBI(codebits[ind >> 3], ind & 0x7); // parameter exists
SBI(codebits[PARAM_IND(ind)], PARAM_BIT(ind)); // parameter exists
param[ind] = ptr ? ptr - command_ptr : 0; // parameter offset or 0
#if ENABLED(DEBUG_GCODE_PARSER)
if (debug) {
SERIAL_ECHOPAIR("Set bit ", (int)(ind & 0x7));
SERIAL_ECHOPAIR(" of index ", (int)(ind >> 3));
SERIAL_ECHOPAIR("Set bit ", (int)PARAM_BIT(ind));
SERIAL_ECHOPAIR(" of index ", (int)PARAM_IND(ind));
SERIAL_ECHOLNPAIR(" | param = ", hex_address((void*)param[ind]));
}
#endif
@ -120,22 +127,28 @@ public:
// Code seen bit was set. If not found, value_ptr is unchanged.
// This allows "if (seen('A')||seen('B'))" to use the last-found value.
// This is volatile because its side-effects are important
static volatile bool seen(const char c) {
const uint8_t ind = c - 'A';
const uint8_t ind = LETTER_OFF(c);
if (ind >= COUNT(param)) return false; // Only A-Z
const bool b = TEST(codebits[ind >> 3], ind & 0x7);
const bool b = TEST(codebits[PARAM_IND(ind)], PARAM_BIT(ind));
if (b) value_ptr = command_ptr + param[ind];
return b;
}
static volatile bool seen_any() { return codebits[3] || codebits[2] || codebits[1] || codebits[0]; }
static bool seen_any() { return codebits[3] || codebits[2] || codebits[1] || codebits[0]; }
#define SEEN_TEST(L) TEST(codebits[(L - 'A') >> 3], (L - 'A') & 0x7)
#define SEEN_TEST(L) TEST(codebits[LETTER_IND(L)], LETTER_BIT(L))
#else
// Seen any axis parameter
// Optimized by moving 'X' up to index 24
FORCE_INLINE bool seen_axis() { return codebits[3] || SEEN_TEST('E'); }
#else // !FASTER_GCODE_PARSER
// Code is found in the string. If not found, value_ptr is unchanged.
// This allows "if (seen('A')||seen('B'))" to use the last-found value.
// This is volatile because its side-effects are important
static volatile bool seen(const char c) {
const char *p = strchr(command_args, c);
const bool b = !!p;
@ -143,25 +156,26 @@ public:
return b;
}
static volatile bool seen_any() { return *command_args == '\0'; }
static bool seen_any() { return *command_args == '\0'; }
#define SEEN_TEST(L) !!strchr(command_args, L)
#endif // FASTER_GCODE_PARSER
// Seen any axis parameter
static bool seen_axis() {
return SEEN_TEST('X') || SEEN_TEST('Y') || SEEN_TEST('Z') || SEEN_TEST('E');
}
#endif // !FASTER_GCODE_PARSER
// Populate all fields by parsing a single line of GCode
// This uses 54 bytes of SRAM to speed up seen/value
static void parse(char * p);
// Code value pointer was set
// The code value pointer was set
FORCE_INLINE static bool has_value() { return value_ptr != NULL; }
// Seen and has value
FORCE_INLINE static bool seenval(const char c) { return seen(c) && has_value(); }
static volatile bool seen_axis() {
return SEEN_TEST('X') || SEEN_TEST('Y') || SEEN_TEST('Z') || SEEN_TEST('E');
}
// Seen a parameter with a value
inline static bool seenval(const char c) { return seen(c) && has_value(); }
// Float removes 'E' to prevent scientific notation interpretation
inline static float value_float() {
@ -184,20 +198,20 @@ public:
}
// Code value as a long or ulong
inline static long value_long() { return value_ptr ? strtol(value_ptr, NULL, 10) : 0L; }
inline unsigned static long value_ulong() { return value_ptr ? strtoul(value_ptr, NULL, 10) : 0UL; }
inline static int32_t value_long() { return value_ptr ? strtol(value_ptr, NULL, 10) : 0L; }
inline static uint32_t value_ulong() { return value_ptr ? strtoul(value_ptr, NULL, 10) : 0UL; }
// Code value for use as time
FORCE_INLINE static millis_t value_millis() { return value_ulong(); }
FORCE_INLINE static millis_t value_millis_from_seconds() { return value_float() * 1000UL; }
// Reduce to fewer bits
FORCE_INLINE static int value_int() { return (int)value_long(); }
FORCE_INLINE uint16_t value_ushort() { return (uint16_t)value_long(); }
inline static uint8_t value_byte() { return (uint8_t)(constrain(value_long(), 0, 255)); }
FORCE_INLINE static int16_t value_int() { return (int16_t)value_long(); }
FORCE_INLINE static uint16_t value_ushort() { return (uint16_t)value_long(); }
inline static uint8_t value_byte() { return (uint8_t)constrain(value_long(), 0, 255); }
// Bool is true with no value or non-zero
inline static bool value_bool() { return !has_value() || value_byte(); }
inline static bool value_bool() { return !has_value() || value_byte(); }
// Units modes: Inches, Fahrenheit, Kelvin
@ -282,17 +296,28 @@ public:
}
}
#else
#else // !TEMPERATURE_UNITS_SUPPORT
FORCE_INLINE static float value_celsius() { return value_float(); }
FORCE_INLINE static float value_celsius_diff() { return value_float(); }
#endif
#endif // !TEMPERATURE_UNITS_SUPPORT
FORCE_INLINE static float value_feedrate() { return value_linear_units(); }
void unknown_command_error();
// Provide simple value accessors with default option
FORCE_INLINE static float floatval(const char c, const float dval=0.0) { return seenval(c) ? value_float() : dval; }
FORCE_INLINE static bool boolval(const char c, const bool dval=false) { return seen(c) ? value_bool() : dval; }
FORCE_INLINE static uint8_t byteval(const char c, const uint8_t dval=0) { return seenval(c) ? value_byte() : dval; }
FORCE_INLINE static int16_t intval(const char c, const int16_t dval=0) { return seenval(c) ? value_int() : dval; }
FORCE_INLINE static uint16_t ushortval(const char c, const uint16_t dval=0) { return seenval(c) ? value_ushort() : dval; }
FORCE_INLINE static int32_t longval(const char c, const int32_t dval=0) { return seenval(c) ? value_long() : dval; }
FORCE_INLINE static uint32_t ulongval(const char c, const uint32_t dval=0) { return seenval(c) ? value_ulong() : dval; }
FORCE_INLINE static float linearval(const char c, const float dval=0.0) { return seenval(c) ? value_linear_units() : dval; }
FORCE_INLINE static float celsiusval(const char c, const float dval=0.0) { return seenval(c) ? value_celsius() : dval; }
};
extern GCodeParser parser;

2
Marlin/servo.cpp
Unescape View File

@ -95,7 +95,7 @@ static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t
if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) {
*OCRnA = *TCNTn + SERVO(timer, Channel[timer]).ticks;
if (SERVO(timer, Channel[timer]).Pin.isActive) // check if activated
digitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, HIGH); // its an active channel so pulse it high
digitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, HIGH); // it's an active channel so pulse it high
}
else {
// finished all channels so wait for the refresh period to expire before starting over

22
Marlin/twibus.h
Unescape View File

@ -38,18 +38,18 @@ typedef void (*twiRequestFunc_t)();
/**
* TWIBUS class
*
* This class implements a wrapper around the two wire (I2C) bus, it allows
* Marlin to send and request data from any slave device on the bus. This is
* an experimental feature and it's inner workings as well as public facing
* interface are prune to change in the future.
* This class implements a wrapper around the two wire (I2C) bus, allowing
* Marlin to send and request data from any slave device on the bus.
*
* The two main consumers of this class are M260 and M261, where M260 allows
* Marlin to send a I2C packet to a device (please be aware that no repeated
* starts are possible), this can be done in caching method by calling multiple
* times M260 B<byte-1 value in base 10> or a one liner M260, have a look at
* the gcode_M260() function for more information. M261 allows Marlin to
* request data from a device, the received data is then relayed into the serial
* line for host interpretation.
* The two main consumers of this class are M260 and M261. M260 provides a way
* to send an I2C packet to a device (no repeated starts) by caching up to 32
* bytes in a buffer and then sending the buffer.
* M261 requests data from a device. The received data is relayed to serial out
* for the host to interpret.
*
* For more information see
* - http://marlinfw.org/docs/gcode/M260.html
* - http://marlinfw.org/docs/gcode/M261.html
*
*/
class TWIBus {

12
Marlin/ubl_G29.cpp
Unescape View File

@ -314,7 +314,7 @@
// Check for commands that require the printer to be homed
if (axis_unhomed_error()) {
const int8_t p_val = parser.seen('P') && parser.has_value() ? parser.value_int() : -1;
const int8_t p_val = parser.intval('P', -1);
if (p_val == 1 || p_val == 2 || p_val == 4 || parser.seen('J'))
home_all_axes();
}
@ -492,7 +492,7 @@
return;
}
const float height = parser.seen('H') && parser.has_value() ? parser.value_float() : Z_CLEARANCE_BETWEEN_PROBES;
const float height = parser.floatval('H', Z_CLEARANCE_BETWEEN_PROBES);
manually_probe_remaining_mesh(g29_x_pos, g29_y_pos, height, g29_card_thickness, parser.seen('T'));
SERIAL_PROTOCOLLNPGM("G29 P2 finished.");
@ -1094,9 +1094,9 @@
g29_constant = 0.0;
g29_repetition_cnt = 0;
g29_x_flag = parser.seen('X') && parser.has_value();
g29_x_flag = parser.seenval('X');
g29_x_pos = g29_x_flag ? parser.value_float() : current_position[X_AXIS];
g29_y_flag = parser.seen('Y') && parser.has_value();
g29_y_flag = parser.seenval('Y');
g29_y_pos = g29_y_flag ? parser.value_float() : current_position[Y_AXIS];
if (parser.seen('R')) {
@ -1170,7 +1170,7 @@
g29_constant = parser.value_float();
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
if (parser.seen('F') && parser.has_value()) {
if (parser.seenval('F')) {
const float fh = parser.value_float();
if (!WITHIN(fh, 0.0, 100.0)) {
SERIAL_PROTOCOLLNPGM("?(F)ade height for Bed Level Correction not plausible.\n");
@ -1180,7 +1180,7 @@
}
#endif
g29_map_type = parser.seen('T') && parser.has_value() ? parser.value_int() : 0;
g29_map_type = parser.intval('T');
if (!WITHIN(g29_map_type, 0, 2)) {
SERIAL_PROTOCOLLNPGM("Invalid map type.\n");
return UBL_ERR;

Write Preview
Loading…
Cancel
Save