Formatting cleanup of quiet sources

master
Scott Lahteine 10 years ago
parent a244bcb953
commit fd78902194

@ -32,8 +32,7 @@
ring_buffer rx_buffer = { { 0 }, 0, 0 };
#endif
FORCE_INLINE void store_char(unsigned char c)
{
FORCE_INLINE void store_char(unsigned char c) {
int i = (unsigned int)(rx_buffer.head + 1) % RX_BUFFER_SIZE;
// if we should be storing the received character into the location
@ -51,8 +50,7 @@ FORCE_INLINE void store_char(unsigned char c)
#if defined(M_USARTx_RX_vect)
// fixed by Mark Sproul this is on the 644/644p
//SIGNAL(SIG_USART_RECV)
SIGNAL(M_USARTx_RX_vect)
{
SIGNAL(M_USARTx_RX_vect) {
unsigned char c = M_UDRx;
store_char(c);
}
@ -60,15 +58,11 @@ FORCE_INLINE void store_char(unsigned char c)
// Constructors ////////////////////////////////////////////////////////////////
MarlinSerial::MarlinSerial()
{
}
MarlinSerial::MarlinSerial() { }
// Public Methods //////////////////////////////////////////////////////////////
void MarlinSerial::begin(long baud)
{
void MarlinSerial::begin(long baud) {
uint16_t baud_setting;
bool useU2X = true;
@ -98,17 +92,14 @@ void MarlinSerial::begin(long baud)
sbi(M_UCSRxB, M_RXCIEx);
}
void MarlinSerial::end()
{
void MarlinSerial::end() {
cbi(M_UCSRxB, M_RXENx);
cbi(M_UCSRxB, M_TXENx);
cbi(M_UCSRxB, M_RXCIEx);
}
int MarlinSerial::peek(void)
{
int MarlinSerial::peek(void) {
if (rx_buffer.head == rx_buffer.tail) {
return -1;
} else {
@ -116,20 +107,19 @@ int MarlinSerial::peek(void)
}
}
int MarlinSerial::read(void)
{
int MarlinSerial::read(void) {
// if the head isn't ahead of the tail, we don't have any characters
if (rx_buffer.head == rx_buffer.tail) {
return -1;
} else {
}
else {
unsigned char c = rx_buffer.buffer[rx_buffer.tail];
rx_buffer.tail = (unsigned int)(rx_buffer.tail + 1) % RX_BUFFER_SIZE;
return c;
}
}
void MarlinSerial::flush()
{
void MarlinSerial::flush() {
// don't reverse this or there may be problems if the RX interrupt
// occurs after reading the value of rx_buffer_head but before writing
// the value to rx_buffer_tail; the previous value of rx_buffer_head
@ -143,38 +133,30 @@ void MarlinSerial::flush()
}
/// imports from print.h
void MarlinSerial::print(char c, int base)
{
void MarlinSerial::print(char c, int base) {
print((long) c, base);
}
void MarlinSerial::print(unsigned char b, int base)
{
void MarlinSerial::print(unsigned char b, int base) {
print((unsigned long) b, base);
}
void MarlinSerial::print(int n, int base)
{
void MarlinSerial::print(int n, int base) {
print((long) n, base);
}
void MarlinSerial::print(unsigned int n, int base)
{
void MarlinSerial::print(unsigned int n, int base) {
print((unsigned long) n, base);
}
void MarlinSerial::print(long n, int base)
{
void MarlinSerial::print(long n, int base) {
if (base == 0) {
write(n);
} else if (base == 10) {
}
else if (base == 10) {
if (n < 0) {
print('-');
n = -n;
@ -185,81 +167,68 @@ void MarlinSerial::print(long n, int base)
}
}
void MarlinSerial::print(unsigned long n, int base)
{
void MarlinSerial::print(unsigned long n, int base) {
if (base == 0) write(n);
else printNumber(n, base);
}
void MarlinSerial::print(double n, int digits)
{
void MarlinSerial::print(double n, int digits) {
printFloat(n, digits);
}
void MarlinSerial::println(void)
{
void MarlinSerial::println(void) {
print('\r');
print('\n');
}
void MarlinSerial::println(const String &s)
{
void MarlinSerial::println(const String &s) {
print(s);
println();
}
void MarlinSerial::println(const char c[])
{
void MarlinSerial::println(const char c[]) {
print(c);
println();
}
void MarlinSerial::println(char c, int base)
{
void MarlinSerial::println(char c, int base) {
print(c, base);
println();
}
void MarlinSerial::println(unsigned char b, int base)
{
void MarlinSerial::println(unsigned char b, int base) {
print(b, base);
println();
}
void MarlinSerial::println(int n, int base)
{
void MarlinSerial::println(int n, int base) {
print(n, base);
println();
}
void MarlinSerial::println(unsigned int n, int base)
{
void MarlinSerial::println(unsigned int n, int base) {
print(n, base);
println();
}
void MarlinSerial::println(long n, int base)
{
void MarlinSerial::println(long n, int base) {
print(n, base);
println();
}
void MarlinSerial::println(unsigned long n, int base)
{
void MarlinSerial::println(unsigned long n, int base) {
print(n, base);
println();
}
void MarlinSerial::println(double n, int digits)
{
void MarlinSerial::println(double n, int digits) {
print(n, digits);
println();
}
// Private Methods /////////////////////////////////////////////////////////////
void MarlinSerial::printNumber(unsigned long n, uint8_t base)
{
void MarlinSerial::printNumber(unsigned long n, uint8_t base) {
unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars.
unsigned long i = 0;
@ -279,11 +248,9 @@ void MarlinSerial::printNumber(unsigned long n, uint8_t base)
'A' + buf[i - 1] - 10));
}
void MarlinSerial::printFloat(double number, uint8_t digits)
{
void MarlinSerial::printFloat(double number, uint8_t digits) {
// Handle negative numbers
if (number < 0.0)
{
if (number < 0.0) {
print('-');
number = -number;
}
@ -305,8 +272,7 @@ void MarlinSerial::printFloat(double number, uint8_t digits)
print(".");
// Extract digits from the remainder one at a time
while (digits-- > 0)
{
while (digits-- > 0) {
remainder *= 10.0;
int toPrint = int(remainder);
print(toPrint);

@ -23,7 +23,7 @@
#define MarlinSerial_h
#include "Marlin.h"
#if !defined(SERIAL_PORT)
#ifndef SERIAL_PORT
#define SERIAL_PORT 0
#endif
@ -57,7 +57,6 @@
#define M_U2Xx SERIAL_REGNAME(U2X,SERIAL_PORT,)
#define DEC 10
#define HEX 16
#define OCT 8
@ -73,8 +72,7 @@
#define RX_BUFFER_SIZE 128
struct ring_buffer
{
struct ring_buffer {
unsigned char buffer[RX_BUFFER_SIZE];
int head;
int tail;
@ -84,8 +82,7 @@ struct ring_buffer
extern ring_buffer rx_buffer;
#endif
class MarlinSerial //: public Stream
{
class MarlinSerial { //: public Stream
public:
MarlinSerial();
@ -95,22 +92,18 @@ class MarlinSerial //: public Stream
int read(void);
void flush(void);
FORCE_INLINE int available(void)
{
FORCE_INLINE int available(void) {
return (unsigned int)(RX_BUFFER_SIZE + rx_buffer.head - rx_buffer.tail) % RX_BUFFER_SIZE;
}
FORCE_INLINE void write(uint8_t c)
{
FORCE_INLINE void write(uint8_t c) {
while (!((M_UCSRxA) & (1 << M_UDREx)))
;
M_UDRx = c;
}
FORCE_INLINE void checkRx(void)
{
FORCE_INLINE void checkRx(void) {
if ((M_UCSRxA & (1<<M_RXCx)) != 0) {
unsigned char c = M_UDRx;
int i = (unsigned int)(rx_buffer.head + 1) % RX_BUFFER_SIZE;
@ -126,38 +119,16 @@ class MarlinSerial //: public Stream
}
}
private:
void printNumber(unsigned long, uint8_t);
void printFloat(double, uint8_t);
public:
FORCE_INLINE void write(const char *str) { while (*str) write(*str++); }
FORCE_INLINE void write(const uint8_t *buffer, size_t size) { while (size--) write(*buffer++); }
FORCE_INLINE void print(const String &s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
FORCE_INLINE void print(const char *str) { write(str); }
FORCE_INLINE void write(const char *str)
{
while (*str)
write(*str++);
}
FORCE_INLINE void write(const uint8_t *buffer, size_t size)
{
while (size--)
write(*buffer++);
}
FORCE_INLINE void print(const String &s)
{
for (int i = 0; i < (int)s.length(); i++) {
write(s[i]);
}
}
FORCE_INLINE void print(const char *str)
{
write(str);
}
void print(char, int = BYTE);
void print(unsigned char, int = BYTE);
void print(int, int = DEC);

Loading…
Cancel
Save