6e29795a80
Bed leveling and rewipe updates (T2443)
...
- Bed leveling is now hidden from the LCD menu (T2443)
- Updated Hibiscus rewipe location (T2443)
- 4th corner information now shown under "G29 V1"
6 years ago
633a7b1971
A happy assortment of fixes (T2425, T2398, T2427, T2267)
...
The following change will affect all printers:
- Restored old behavior of returning to first LCD menu item on back (T2425)
- Actually disabled PRINTJOB_TIMER_AUTOSTART (T2267)
The following changes will affect Hibiscus only:
- Changed default Z-offset to -1.1 (T2398)
- Fixed issue where "G29 V4" would crash if a failed probe happened (T2427)
6 years ago
fd8a9286a2
Renamed "Auto-Level" to "Level X Axis" (T2123)
6 years ago
08686a0862
Changed LCD representation of Z-Offset ( #2240 )
...
- Z Offset now shown using two decimal places to better match the
resolution of the encoder.
6 years ago
ac4fac7b6f
Fix menu highlight glitch, tweak scrolling code.
...
- Backport of fix by thinkyhead for LCD scrolling glitch (#9954 )
- May fix T1613?
6 years ago
cc6a04c782
Changed feedrate on pause (T2115).
...
- Reduced extrusion length on unpause to 10 mm and feedrate to 1 mm/sec
- Also added auto-leveling option for Hibiscus.
6 years ago
6f8605bc63
Fix to Hibiscus LCD timeout (T1822)
...
- LCD will now properly timeout after the user leaves
the move axis screen.
6 years ago
c5973765e4
Disabled position display in Hibiscus UI (T1822)
...
- Position display is now disabled as requested by marketing.
- Merged upstream Marlin changes to GUI code.
6 years ago
8ad9a2720e
Improvements to the Hibiscus LCD and CLCD.
...
- The B&W LCD will now support scrolling of long status messages
- The B&W LCD code was improved to be more efficient
- The Color LCD code now allows you to touch the temperatures to go into the temp tuning screens
or the positions to go into the move axis screen.
6 years ago
310951f92e
Merge remote-tracking branch 'origin/upstream_1.1.8' into devel
6 years ago
04a4d72b2e
Boot screen no longer shown when activating menu.
...
- On Hibiscus, will allow SD card to be inserted/removed without garbled screen
- On other FW, will eliminate boot screen flash when entering menu.
6 years ago
d80aa70c24
Improved status screen for Hibiscus and Quiver.
6 years ago
10d73155b0
Hide LEVELING item for probeless w/out LCD Leveling
6 years ago
e1b998e40a
More externs and functions in Marlin.h
6 years ago
6353ccb1f4
Fixed "Change Filament E1/E2" to work during print (T1557)
...
- Found a better way to implement "Change Filament E1/E2" such that it
will not crash Marlin when called in the middle of an ongoing print
from either USB or SD card.
- Former "Change Filament E1/E2" implementation would only work before a
print was begun.
- This fix applies to all dual toolheads.
6 years ago
7f8b0ed87b
Hide "Change Filament E2" on single extruder (T1535)
...
- Fix for allowing all toolheads to compile
- Removed unnecessary state variable on single toolheads.
6 years ago
a20eacaa48
UBL devel debugging flag
6 years ago
574153a810
No lcd_map_control needed in quick_stop
7 years ago
1063b3b2b8
Changes for parity with 2.0.x
7 years ago
ff26b7446c
Standardize LCD interface code for UBL a little
7 years ago
7b6ad28a5d
General UBL/G26 code cleanup
7 years ago
67c6590fa6
Fixes for LCD change filament (T1438, T1221)
...
- "Change filament" now allows extruder selection on dual extruder heads (T1438)
- Fix for broken M600 resume_print; head motion during M600; backport from upstream (T1221)
7 years ago
d951ba83e6
Show "Level Bed Corners" item with UBL too
...
Addressing #8676
7 years ago
8e66526daf
T1375 Esteps display accuracy now integers.
...
To allow for easier adjusting from the LCD.
7 years ago
68c1f05aeb
Cleanups/changes to led control menu
7 years ago
e25567a5dd
New feature: LED_CONTROL_MENU
7 years ago
915c4b9ce2
Make MBL work more like PROBE_MANUALLY
7 years ago
5a1f1305f0
SD Menu patches
7 years ago
3cf31205bc
Tweaks to bed leveling menus
7 years ago
59a699063a
Fix #8537
7 years ago
c0190eff00
Adapt MESH_EDIT_GFX_OVERLAY for 1.1.x
7 years ago
3b431f2f72
Arrange G26 functions in dependency order
7 years ago
8282d732c1
Make G26 work with all mesh leveling.
...
Example Configuration.h files are not updated yet. You need to cross
your settings over to the default Configuration.h file in the \Marlin
directory. (UBL_G26_MESH_VALIDATION enablement has moved to a new
location in the file.)
7 years ago
99b71c1dde
Move lcd_map_control to UBL
...
For parity with bugfix-2.0.x
7 years ago
73ddc762c8
Fix up LCD init / charset
7 years ago
4f05a66ee1
Fixes #8472
7 years ago
622d100c30
No retroactive changes with M851 Z
7 years ago
a6ee4a0468
Apply SDCARD_SORT_ALPHA changes from 2.0.x
7 years ago
3293823642
Add pre-calculated planner.e_factor
7 years ago
8ce9306b27
PROBE_SELECTED etc.
7 years ago
658e1ebe5a
Add delta_height variable in lieu of using home_offset
7 years ago
4a857f1af6
Followup to G33/LCD patch #8318
7 years ago
1d0739d6d1
Patch G33 misuse of PROBE_MANUALLY
7 years ago
640526f0c8
Operate in Native Machine Space
7 years ago
13a3fb1acc
Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
...
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
7 years ago
34aeaec553
Remove ADKey steps acceleration
7 years ago
704640bf98
Faster menu navigation for Anet A8
...
Addressing #8166
7 years ago
5e5a177934
No hacks needed for SD_REPRINT_LAST_SELECTED_FILE
7 years ago
0b5b03d9dc
Tweak for soft endstops
7 years ago
6698db29de
Update LCD draw condition
7 years ago
Marcio Teixeira