471c2b5d5c
Provide a default SERVO0_PIN for Anet 1.0
7 years ago
daa85f71e1
Merge pull request #8123 from thinkyhead/bf1_dual_xyz_endstops
...
[1.1.x] Dual endstops XYZ
7 years ago
9850ba0cbd
[1.1.x] Fix M303 thermal protection #8103 ( #8126 )
...
* Fixed M303 thermal protection
The temperature sanity checking logic was not being applied during M303
(pid autotuning) because instead of setting a target temperature, it
directly manipulated the pwm values. When PIDTEMP/PIDTEMPBED is
enabled, PWM values rather than the target temperature determine whether
the heater is on. I changed this to look directly at the PWM amount
when pid is enabled.
* Turn off heaters on M303 error
Currently, PID autotuning stops if it overshoots the temperature by 20C
or if if the temperature does not change for 20 minutes and it times
out. I added calls to disable the heaters in these scenarios.
* Removed unnecessary if statement.
Added changes suggested by GMagician.
* Update temperature.cpp
* Update temperature.cpp
* Update temperature.cpp
7 years ago
318c419f77
Implement support for Dual X and Y endstops
7 years ago
7e1232269a
Add Dual Steppers / Endstops to configs
7 years ago
62d52d62dc
Cleanup for DIGIPOTS settings
7 years ago
77cf42588f
(1.1.x) serious bug G33
7 years ago
a979c428ee
Revert default BABYSTEP_MULTIPLICATOR to 1
7 years ago
6920769a9a
Added MKS GEN L board ( #8088 )
...
[1.1.x] Add MKS GEN L board
7 years ago
410aa0716d
Concise SD_REPRINT_LAST_SELECTED_FILE description
7 years ago
445a7f65cd
Clean up trailing whitespace
7 years ago
e64cfb13b8
(1.1.x) auto tune calibration parameters ( #8031 )
...
* auto tune calibration parameters
* solve warnings
* Tweaks to formatting
* review Thinkyhead
* Error
7 years ago
2296d98845
Tweak neopixel self-test
7 years ago
9aac3d8773
Add some Polish translations
...
Thanks @SCiunczyk
7 years ago
6569b9ba56
Fix FWRETRACT logic, apply common sense
7 years ago
7ab9abe4ef
Merge pull request #8107 from Bob-the-Kuhn/1.1.x-reduced-font-fix
...
(bug fix) 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages
7 years ago
3357170b18
give this language an unique name
7 years ago
2e746f2b8b
Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE ( #8104 )
...
* Initial conflict resolution
All previous items resolved:
- Use of ELAPSED() on timer code
- Switch to use of defer_return_to_status=true as much as possible
- Update & Clean Up of Max7219 routines
* Resolve non-SD case in ultralcd.cpp
7 years ago
594c075377
1.1.x - save 1400 bytes of FLASH by using reduced font for some languages ( #8095 )
...
* use reduced sized font for some languages
* Fit Portuguese language files to existing scheme
* Rename language_pl-DOGM.h to language_pl_utf8.h
* Rename language_pl_utf8.h to language_pl-DOGM.h
* Update dogm_font_data_ISO10646_1.h
* Update dogm_font_data_ISO10646_1.h
7 years ago
8bb1e91afd
More specific M100 description
7 years ago
a12d1b21b5
Merge pull request #8048 from madmo/mks-mini-gt2560
...
[1.1.x] Add MKS MINI 12864 support to GT2560
7 years ago
5bed2f351a
Fix spacing, use single instances of similar pins
7 years ago
ec9d7b639d
Encourage users to re-examine their configs
7 years ago
1c97c1582c
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
7 years ago
f06f4b40b8
Apply physical limits to mesh bounds
7 years ago
3235beef6d
Merge pull request #8073 from thinkyhead/bf1_fix_M600
...
[1.1.x] Fix position sync in M600 pause/resume
7 years ago
e5ab783b08
Merge pull request #8061 from thinkyhead/bf1_general_cleanup
...
[1.1.x] Patch up some verbiage in configs
7 years ago
355ebec92d
Fix position sync in M600 pause/resume
7 years ago
fa157f08ff
lcd <20 disply Bed Temperature cast ty ( #8068 )
7 years ago
39a545b3f8
Patch up some verbiage in configs
7 years ago
e9bc9a2ab4
change to better (more clear) names ( #8049 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
7 years ago
b22c87183f
Add MKS MINI 12864 support for GT2560
7 years ago
fa44130734
Add M290 babystepping ( #8014 )
...
* Add M290 babystepping
* Allow `Z` for `M290`
* fix spacing
* Support BABYSTEP_XY in M290
* Not just Z
* Extend M290 for BABYSTEP_ZPROBE_OFFSET
* tweak
7 years ago
9b3f27f02a
Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 ( #8041 )
...
[1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1
7 years ago
a7398a0459
Prevent SDCARD_SORT_ALPHA from exploding
7 years ago
91c5c2538a
Add SCROLL_LONG_FILENAMES advanced option
...
Based on #7637 by @marcio-ao
7 years ago
259cf1b0b2
BQ enables this in the config. Remove here
7 years ago
2338632270
Simplify Cartesian probing bounds
...
Followup to #8011
7 years ago
2a88a3fd33
boolval revised ( #8017 )
7 years ago
84470f6b2a
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8011 )
7 years ago
e04902f589
Add EXTRA_FAN_SPEED feature
7 years ago
d63d08ef8b
Merge pull request #7948 from gallynero/patch-1
...
Enable change feedrate in delta
7 years ago
5c2ff6ed19
Add Capability BUILD_PERCENT
7 years ago
5f708d47ce
Add LCD_SET_PROGRESS_MANUALLY
7 years ago
3b4b9c6d68
Unaccented French for Character Display
7 years ago
8df47d76c7
Add control board MAKEBOARD Mini
...
+Add French language without accent for japanese LCD
7 years ago
be55a49946
Merge pull request #7980 from thinkyhead/bf1_granular_sw_endstops
...
[1.1.x] Software endstop options by axis
7 years ago
e05af35678
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
7 years ago
060d16d26b
Split the software endstop capability by axis.
...
Based on #7975 and #7979
7 years ago
e17869ca20
Fix Emergency Parser
...
Followup to #7459
7 years ago
Scott Lahteine