2f2459c0db
Fix G10/G11 Z-lift
11 years ago
0f7393a13e
Refactor 'accurate' auto bed leveling to use probe_pt()
11 years ago
c4fbb44d6d
Refactor 3-point auto bed leveling to use probe_pt()
11 years ago
ad2c6488c7
Add probe_pt(), useful for auto bed leveling
11 years ago
7dcd350941
A few changes to Russian, changed LCD strings to be <=17 characters.
11 years ago
c31bb2b7ad
Only show the ZProbe offset when auto-bed-leveling is enabled.
11 years ago
46f5bea19f
Add configurable beep for UltiPanel.
11 years ago
d16a770855
Ultimainboard 2.x does not has a PS_ON pin.
11 years ago
71bb3a8133
Add comments for Ultimainboard 2.0 configuration.
11 years ago
9b7d87e885
Remove duplicate contrast define.
11 years ago
816f0a678a
Merge pull request #768 from whosawhatsis/Marlin_v1
...
multiple FWretract fixes
11 years ago
6e43398509
G10/G11 bugfixes
...
Previous version was broken by using G92 E0 between retract and recover.
11 years ago
d6c5c503d4
correct feedrate units in comments for M207/M208
11 years ago
15d6116188
Merge pull request #689 from cajun-rat/tidy
...
Use C++ initialization list
11 years ago
0b9ecf3824
Language cleanup, part 1.
11 years ago
b5ba5c1465
Merge branch 'Marlin_v1' of https://github.com/whosawhatsis/Marlin into Marlin_v1
11 years ago
78e7654601
Keep FWRETRACT values in terms of millimeters when using M200
...
for volumetric E units
11 years ago
3f6d44d40b
Keep FWRETRACT values in terms of millimeters when using M200 for volumetric E units
11 years ago
5f797ca29f
Updated Polish, changed default firmware URL to Marlin.
11 years ago
0778f5f028
Add missing entries to the new Aragonian language.
11 years ago
54bab3e0d0
Merge branch 'Marlin_v1' into localisation
...
Conflicts:
Marlin/language.h
11 years ago
bdd0211aeb
Move strings in ultralcd.cpp into language.h.
11 years ago
c8e5a82d49
keep English as default lang.
11 years ago
f64592e362
Add Aragonese translation
11 years ago
ac74f45dc0
Merge pull request #752 from MatixYo/patch-3
...
Update language.h
11 years ago
36086d3ca4
Update language.h
...
Updated Polish translations.
11 years ago
d485988bec
fix typo
11 years ago
8a1fd25363
Default is to not define digipot_i2c
11 years ago
5097c57d3a
Added pins for Azteeg X3 Pro under motherboard 68
11 years ago
b819fc53ca
Add Azteeg X3 Pro as motherboard 68
...
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
11 years ago
e1ae7952eb
Merge pull request #743 from Opticalworm/Marlin_v1
...
Improved support for panelolu2 encoder and buzzer
11 years ago
a5f53f0cf3
Heater wattage reporting for M105 using EXTRUDER_WATTS and BED_WATTS
11 years ago
8d162e5bd7
Improved support for panelolu2 encoder and buzzer
...
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS which is used to alter the default
buzzer sound.
When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS
When selecting the sanguinololu 1284p the following is true:
- its now enables LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
11 years ago
b2c11ba980
Change diameter code to 'D'
...
For some reason that I can’t figure out, the decimal is dropped when
using ’S’ for the code.
Also some minor code improvements to M200.
11 years ago
61059385a3
Merge pull request #737 from whosawhatsis/M200
...
M200 implementation
11 years ago
856edfcc0d
Fixed math
...
This is why I wanted to sleep on the code I wrote while falling asleep
rather than immediately submitting a pull request.
11 years ago
0d81ae77bc
Merge pull request #727 from drf5n/oversampling
...
temperature.cpp: Actually use OVERSAMPLENR in the oversampling calculation.
11 years ago
84df13f7d1
Merge pull request #721 from drf5n/lcdOnly
...
Enable basic ULTRA_LCD screen w/o encoders and menus.
11 years ago
4c7e9502ad
Merge pull request #718 from drf5n/temptableRes
...
createTemperatureLookupMarlin.py: Add resolution comments and format for...
11 years ago
652a0f6b5a
Merge pull request #717 from drf5n/tpins2
...
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/...
11 years ago
96a0cdc541
Merge pull request #716 from drf5n/maketeensy
...
Makefile: Update for Arduino 1.0.5 and Teensyduino dependent boards (HAR...
11 years ago
d24df7af2c
M200 implementation
11 years ago
f0b8d5ba3d
createTemperatureLookupMarlin.py: Change comment to refer to actual program name.
11 years ago
50f44d9249
createTemperatureLookupMarlin.py: Truncate to short after application of OVERSAMPLENR for improved resolution.
11 years ago
f5b5dd8038
createTemperatureLookupMarlin.py: Add output of Steinhart-Hart coefficients.
11 years ago
76cf07c3f7
Configuration.h: Use OVERSAMPLENR in dT_PID definition.
11 years ago
476c7193d8
temperature.cpp: Use OVERSAMPLENR in oversampling calculation.
11 years ago
f08bb8bb6a
Previous commit borked.
11 years ago
b1f8f492c6
Remove previous_millis_cmd update from extruder runout prevention code
...
This seems to defeat the purpose of previous_millis_cmd, preventing the
time elapsed from previous_millis_cmd from ever reaching
max_inactive_time or stepper_inactive_time while the heat was on.
11 years ago
8a5eaa3c9b
Fix crash after home bug
...
Fixes a bug in the Extruder Runout Prevention feature that caused the
extruder to move back to “current_position” after a move if it was
activated while the move was in progress. For long home moves (which
are longer than the dimensions of the machine’s working area), this
would cause the machine to crash into the far end of its travel after
homing. This usually occurred on the Z axis, which could result in
damage to the machine if you don’t hit the reset button in time.
11 years ago
whosawhatsis