Bo Herrmannsen
3c9e6b7b62
added link for pic to hex converter
10 years ago
Bo Herrmannsen
0e760274bd
changed reprap logo to marlin logo
10 years ago
Bo Herrmannsen
b291a422e9
added square png version of logo
...
406*406 pixels
10 years ago
Luis E Alvarado
7ae548cf34
Update Marlin Firmware URL
10 years ago
Erik van der Zalm
8f9067faa6
Added marlin logos. (Designed by Ahmet Cem TURAN)
10 years ago
Bo Herrmannsen
addf52fd4a
Merge pull request #1328 from DinoMesina/development
...
Some corrections and new features
10 years ago
Dino Del Favero
5cfe13f240
Correct some mistakes
10 years ago
Dino Del Favero
c7e2d73039
Merge branch 'development'
...
ok
10 years ago
Alex Borro
422a958a34
Fix CoreXY speed calculation
...
For cartesian bots, the X_AXIS is the real X movement and same for
Y_AXIS.
But for corexy bots, that is not true. The "X_AXIS" and "Y_AXIS" motors
(that should be named to A_AXIS
and B_AXIS) cannot be used for X and Y length, because A=X+Y and B=X-Y.
So we need to create other 2 "AXIS", named X_HEAD and Y_HEAD, meaning
the real displacement of the Head.
Having the real displacement of the head, we can calculate the total
movement length and apply the desired speed.
10 years ago
Dino Del Favero
038fccd7a1
I have added some code in the "temperature.cpp" for have the possibility of control the time of the states with the heater drived by relays, with this feature now it is possible use PID function in conjunction with relay to control the temperature. I have made some tests and the temperature stay always in the range of +-1°C from the setted temp.
...
There is the possibility of turn on this features adding "#define SLOW_PWM_HEATERS" in Configuration.h
10 years ago
DinoMesina
6730335657
Update Configuration.h
10 years ago
Bo Herrmannsen
4ffecdbf7d
Merge pull request #1313 from wgm4321/Development
...
Re-enable filament menu with recalc fix when enabling/disabling mm3
10 years ago
Steffen Vogel
672f764b4d
replaced ASCII GPL v3 license by markdown version
...
moved new COPYING file to top-level directory to make it more visible and remove clutter from Marlin subduer
10 years ago
Steffen Vogel
f25e793cff
rename stepper lookup table scipt to be consistent with termistor lookup table script
10 years ago
Steffen Vogel
df17a6a1b4
fix #1305 by proposed workaround (thanks gaby64)
10 years ago
Steffen Vogel
f7e65935fb
make use of power operator
10 years ago
Steffen Vogel
4e02aff9b5
automatically determine min/max temp for terminator
10 years ago
Steffen Vogel
81363bc441
more cleanups
10 years ago
Steffen Vogel
95f4a55820
refactored termistor table calculation to be in line with wikipedia's article about Steinhart-Hart coefficients
10 years ago
Steffen Vogel
21205cc3d8
more cleanups in the termistorTable generation script
10 years ago
Steffen Vogel
fb0996b5db
improved output aligment and precision
10 years ago
Steffen Vogel
538231edfd
cosmetic whitespace cleanup and comments added/updated
10 years ago
wgm4321
067b509479
Re-enable filament menu with recalc fix when enabling/disabling mm3
10 years ago
wgm4321
a19f2f8ae7
Disable volumetric menu item due to missing recalc of of multipliers when enabled/disabled
10 years ago
wgm4321
f24dda9700
Revert "Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3"
...
This reverts commit dd7e4ee97f
.
10 years ago
wgm4321
ec4681ab6b
Revert "Add "Detailed Z Probe" menu item with ABL is defined."
...
This reverts commit 2b9722f387
.
10 years ago
wgm4321
dd7e4ee97f
Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3
10 years ago
wgm4321
2b9722f387
Add "Detailed Z Probe" menu item with ABL is defined.
10 years ago
Dan Royer
9472bbe51d
issue 968 for dev branch
...
try, try again.
If 'OK' is garbled on sending PC won't receive it. Both machines will
wait on each other forever. This resends OK if nothing is heard from PC
for a while to avoid this bad case.
10 years ago
alexborro
d2b6e62996
Merge pull request #1309 from philfifi/fix_temp_runaway
...
temp runaway: proper cast to prevent any overflow.
10 years ago
Philippe L
30248214c7
temp runaway: proper cast to prevent any overflow.
10 years ago
Bo Herrmannsen
c5f138ea07
Merge pull request #1291 from alhirzel/Development
...
Define analogInputToDigitalPin only if needed
10 years ago
Bo Herrmannsen
3d9f4ac757
Merge pull request #1303 from wgm4321/Development
...
Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ...
10 years ago
wgm4321
04fb34c7ff
Add English defines for filament menu to non-English to prevent compile errors until translated
10 years ago
wgm4321
f8aa5ff771
Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER defined
10 years ago
Alexander Hirzel
f36fd3ddec
Merge branch 'Development' of https://github.com/ErikZalm/Marlin into Development
10 years ago
Scott Lahteine
b5e50cdd4e
Move scripts and documentation to subfolders
10 years ago
Alexander Hirzel
eed451e034
rework analogInputToDigitalPin definition
10 years ago
Lane Roberts
1f520a5a8c
Due to the fix for #1248 , X and Y probe offsets must not be floats.
...
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
10 years ago
wgm4321
b32be2dc64
Fix syntax error caused by previous changes.
10 years ago
wgm4321
edac64e7d2
Add Filament menu and add Filament/Retract settings to config store.
10 years ago
Alexander Hirzel
ecda6cdc0a
Fix typo, PID_BED_POWER -> MAX_BED_POWER
10 years ago
David Forrest
f3e503e725
temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed.
10 years ago
David Forrest
1d5d853c9a
temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER.
10 years ago
Bo Herrmannsen
63da6900b0
Merge pull request #1282 from vandarin/Development
...
Due to the fix for #1248 , X and Y probe offsets must not be floats.
10 years ago
Bo Herrmannsen
a18b625534
Merge pull request #1261 from wgm4321/Development
...
Add Filament menu and add Filament/Retract settings to config store.
10 years ago
Alexander Hirzel
ae12ad0d6c
Fix typo, PID_BED_POWER -> MAX_BED_POWER
10 years ago
alexborro
80b17ab573
Merge pull request #1285 from drf5n/PID_CI_v2
...
temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER.
10 years ago
David Forrest
625860f086
temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed.
10 years ago
David Forrest
6583bb781d
temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER.
10 years ago