b203901143
Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures
...
Fix auto_report_temperatures()
10 years ago
59a27ed27d
Fix auto_report_temperatures()
...
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
10 years ago
b6b100c471
Merge pull request #5371 from thinkyhead/rc_extruders_can_differ
...
Allow distinct factors for multiple extruders
10 years ago
3391c785c6
Support for distinct E factors
10 years ago
c47e07d129
Fix Dual X software endstops
10 years ago
4217e9653e
Adjust park code in tool_change
10 years ago
b20405db31
Only DXC_AUTO_PARK_MODE should auto-move in tool_change
10 years ago
ca24af7d5d
Dual X with home_z_safely is not parked
10 years ago
0e15b4f434
Dual X set_axis_is_at_home can use x_home_pos for both
10 years ago
54109dfaec
Reduce code size for Dual X un-park
10 years ago
fe96f74db1
Use const arguments in Dual X helper functions
10 years ago
41278c1e8b
Apply LOGICAL_POSITION to home positions on Dual X
10 years ago
053fb55af6
Fix modes ordering in prepare_move_to_destination_dualx
10 years ago
56dd15c0ad
Use SET_INPUT for PS_ON_PIN in kill
10 years ago
c06161b773
Use apply_leveling, not MBL directly
10 years ago
fccc97de6d
Save PROGMEM with string changes
...
Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the
compiler.
10 years ago
27dd5acc22
Fix set_led_color for BLINKM
...
Follow-up to #5330
10 years ago
f60b4f8659
Allow case light pin to be active low
10 years ago
65c50e062e
Support for an RGB LED using 3 pins
10 years ago
092e949b58
Merge pull request #5169 from thinkyhead/rc_core_inverted
...
Support for COREYX, COREZX, COREZY
10 years ago
c7935bb0d2
Merge pull request #5299 from thinkyhead/rc_bed_correction_fade
...
Add a fade factor for mesh leveling
10 years ago
61437d988a
Fix and optimize case-light code
10 years ago
f6f77d34a1
Add a fade factor for mesh leveling
10 years ago
2e966f8e5b
Patch Capabilities Report for "PROGRESS"
10 years ago
d891324830
Merge pull request #5258 from mosh1/mbl_speed_fix
...
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
10 years ago
7f8133a51f
Merge pull request #5255 from Kaibob2/CaseLightMenu
...
Case light menu (3rd attempt)
10 years ago
0c341f0c50
Added Menu entry for Case light
10 years ago
3bc2273ac9
Comment M540
10 years ago
14b74181f5
Merge pull request #5179 from thinkyhead/rc_TMC2130
...
TMC2130 "Silent StepStick" support
10 years ago
bb2114a060
Merge pull request #5264 from thinkyhead/rc_delta_safe_zone
...
Add an option for delta to home to the top
10 years ago
9b96a4a53b
Merge pull request #5246 from thinkyhead/rc_some_cleanup
...
Minor stepper cleanup
10 years ago
3e0376b45e
Reorder M114 and M119 gcode cases
10 years ago
127e21ae00
Extend M122 for all steppers
10 years ago
d67c1d825f
Add TMC2130 support
10 years ago
11effeee2c
Add an option for delta to home to the top
10 years ago
29b174bfb9
Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED
10 years ago
87b6b19256
Patch CASE_LIGHT typo
10 years ago
181cdb3cfe
Move GCode list above include lines
10 years ago
eb120e518c
Followup to new endstop interrupts feature
...
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
10 years ago
832fe284b4
Merge pull request #5184 from AnHardt/endstop_interrupts
...
Introduce endstop interrupts
10 years ago
98600e1433
Minor stepper cleanup
10 years ago
d08867986e
Add autotemp capabilities to M104
...
This allows M104 to pass the F and B parameters to enable autotemp as well
10 years ago
2330619da0
Merge pull request #5191 from petrzjunior/const
...
Replace const bool with #define for consistency
10 years ago
d7ce5d271b
Replace const bool with #define for consistency
10 years ago
5d23e52d75
Merge pull request #5228 from thinkyhead/rc_keep_last_mix
...
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
10 years ago
99b0c1fe56
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
10 years ago
410657b050
Fix G30 with limits, print correct probe XY
10 years ago
f3eee02596
Introduce endstop interrupts
...
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.
The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.
This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
10 years ago
665b7f3893
Merge pull request #5212 from thinkyhead/rc_mixing_faster
...
Store mix factors as reciprocals and multiply
10 years ago
60cc9342a4
Merge pull request #5188 from thinkyhead/rc_extended_host_support
...
Extended host support: M155 Auto temp report, M115 capabilities
10 years ago
Scott Lahteine