6310a00d7e
feed_factor => inverse_secs
7 years ago
6b93d20e4e
Sanity-check skew+UBL
7 years ago
909fac6d90
Update commentary on M48
7 years ago
1951d3a37a
Simplify G26 user_canceled
7 years ago
aa7236e03c
Shorten error text in ubl::G29
7 years ago
574153a810
No lcd_map_control needed in quick_stop
7 years ago
3b30cc90f1
Clean on trigger instead of split_first_move flag
7 years ago
1063b3b2b8
Changes for parity with 2.0.x
7 years ago
93560836de
Allow buffer clean without release command
7 years ago
ff26b7446c
Standardize LCD interface code for UBL a little
7 years ago
7b6ad28a5d
General UBL/G26 code cleanup
7 years ago
5d01a2f467
Move temperature reporting to Temperature class
7 years ago
6e197d4a42
Fix M503 S parameter
7 years ago
a5b20fec2f
Whitespace clean
7 years ago
b19846aca1
Don't split first_move while homing or probing
...
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
7 years ago
d951ba83e6
Show "Level Bed Corners" item with UBL too
...
Addressing #8676
7 years ago
203a445bc1
Minimal include for speed_lookuptable
7 years ago
9edefa645d
Remove skew warning that could crash the planner
7 years ago
794f8f1329
Update K1 => PID_K1
7 years ago
b1f3dfab28
Fix for #8669 ( #8677 )
7 years ago
2d6c84a817
Cleanup constexpr in planner.cpp
7 years ago
23291a0466
Fix SKEW_CORRECTION without leveling
7 years ago
83a1a70103
Creality pins spacing, MINIPANEL CS pin
7 years ago
47f6fc1e07
Set initial endstops state
...
Addressing #8662
7 years ago
f36fdc74ac
Added RAMPS v1.4 Plus board
...
Conflicts:
Marlin/boards.h
7 years ago
ff258d43e7
Merge pull request #8661 from lumbric/bugfix-1.1.x
...
Add missing library in Makefile
7 years ago
d8ef6faa80
Cleanup for dogm_bitmaps
7 years ago
59eb77fd28
One fewer move required…
7 years ago
dde0e9ee0a
Add missing library in Makefile
...
When using RELOC_WORKAROUND library needs to be linked explicitly, otherwise
eeprom functions are not available.
Thanks to @rfjakob for finding the crucial hint to solve this issue.
7 years ago
860d98a897
[1.1.x] SERIAL_XON_XOFF not supported on USB-native AVR devices ( #8653 )
...
* SERIAL_XON_XOFF not supported on USB-native AVR devices
User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
7 years ago
000818f5e4
Split first move to planner for better chaining
7 years ago
298a357a43
Revert "Merge pull request #8608 from thinkyhead/bf1_planner_split_first"
...
This reverts commit 0eef0ff0ded8582b7506
7 years ago
44d2c5ef88
Fix M49 console hang
7 years ago
1600f7d4ee
Merge pull request #8635 from fiveangle/bf1_report_xonxoff
...
[1.1.x] Report SERIAL_XON_XOFF in M115
7 years ago
71a4c04dd5
Merge pull request #8636 from thinkyhead/bf1_ubl_uses_LSL
...
[1.1.x] Use custom segment length for UBL Cartesian
7 years ago
1d0ee83e18
Split first move to planner for better chaining
...
Address #8573 , #8595
7 years ago
db8631e49a
Use custom segment length for UBL Cartesian
7 years ago
2e295759f2
[1.1.x] Report SERIAL_XON_XOFF in M115
...
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
config updates
-Update error checking conditions
7 years ago
d8582b7506
Bring configurations up to date
7 years ago
7f656b867f
Example configuration files for the Wanhao Duplicator 6 for bugfix-1.1.x ( #8614 )
...
* Add default configuration files for the Wanhao Duplicator 6.
* Update Configuration.h
7 years ago
077fed1d88
Fix a homing comment
7 years ago
152c5d2616
Followup to #8613
7 years ago
26c5bbc5a7
Rename inverse_mm_s => inverse_secs
7 years ago
344e6b857a
configuration_store.cpp: Fix in MarlinSettings::load for updated size of DELTA variables ( #8630 )
7 years ago
81e52138cc
More corrections for Bi-Linear to work with G26
7 years ago
a27a9b63e4
Get Bi_Linear macros correct to work with G26
...
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
7 years ago
8b7c274db5
Comment/cleanup motion code
7 years ago
7bed539fdb
Fix missing return values in G33_auto_tune
7 years ago
172ce67344
New feature: BED_SKEW_CORRECTION
7 years ago
a8d83aec89
Add SKEW_CORRECTION to example configs
7 years ago
Scott Lahteine