73c82e7ad8
Clarifying M280 command in Bed Auto Leveling section.
11 years ago
b832f5b9f6
added delta tower babystepping. Its untested, but hopefully florian horsch will be able to try.
...
also, removed some trouble for compilation with corexy.
I think that babystepping is only possible in z for a delta tower.
not sure if it would be usefull to step individual motors on a delta, i don't own one
11 years ago
c38b0855c8
I think that filament change is ready for the masses. I have tested very often with my ultimaker.
...
I strongly vote for it being a single gcode, because otherwise the triggering from the menu is terrible.
11 years ago
d147a057ac
Add the socalled "Babystepping" feature.
...
It is a realtime control over the head position via the LCD menu system that works _while_ printing.
Using it, one can e.g. tune the z-position in realtime, while printing the first layer.
Also, lost steps can be manually added/removed, but thats not the prime feature.
Stuff is placed into the Tune->Babystep *
It is not possible to have realtime control via gcode sending due to the buffering, so I did not include a gcode yet. However, it could be added, but it movements will not be realtime then.
Historically, a very similar thing was implemented for the "Kaamermaker" project, while Joris was babysitting his offspring, hence the name.
say goodby to fuddling around with the z-axis.
11 years ago
bca353cc12
Fixed duplicate define in fastio.h
11 years ago
253dfc4bc1
Bed Auto Leveling feature
...
Check the Readme for instruction how to enable and configure the feature
11 years ago
1bda6bf862
Merge pull request #609 from phq1910/patch-1
...
Update Configuration.h
11 years ago
c80aac1518
Merge pull request #610 from phq1910/patch-2
...
Update pins.h
11 years ago
314fd13c39
Fix for Viki display
11 years ago
4f7c6dfe35
Update pins.h
...
Include Pins cpu Sethi 3D
11 years ago
57173739a1
Update Configuration.h
...
Include CPU Sethi 3D
11 years ago
0dca49a7c0
Added Azteeg X3 board.
11 years ago
d8c2c810b4
Added info to the delta configuration files in the configuration.h file
11 years ago
9bc88f8bab
Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file
11 years ago
3ca1ca6869
Fixed missing ENCODER_PULSES_PER_STEP
11 years ago
6a1e980c6d
Merge pull request #600 from xoan/Encoder_Pulses_Per_Step
...
add ENCODER_PULSES_PER_STEP
11 years ago
20076a8bd3
Merge pull request #598 from GDV0/Marlin_v1
...
FIx compilation error when enabling SERVO_ENDSTOPS (#591 )
11 years ago
3626b5ad8b
Removed Delta from the default config file.
...
Changed EEPROM CHITCHAT behavior. M503 is always enabled.
11 years ago
bf7007d02f
add ENCODER_PULSES_PER_STEP
11 years ago
f17506c504
FIx compilation error when enabling SERVO_ENDSTOPS ( #591 )
11 years ago
59e36f1d27
Merge pull request #595 from nothinman/Marlin_v1
...
Fan fix for Panelolu2+Sanguinololu.
11 years ago
acd8619809
Fan fix for Panelolu2+Sanguinololu.
11 years ago
7c35be7fd8
Merge pull request #594 from gr5/Marlin_v1
...
Fixed bug that makes ulticontroller knob backwards introduced Feb 28 201...
11 years ago
595580556c
Fixed bug that makes ulticontroller knob backwards introduced Feb 28 2013 by Robert.
...
Bug introduced in version 6beb42cdf6839bef6d5d
11 years ago
d78db12abd
Merge pull request #589 from wolfmanjm/upgrade
...
Fix the example delta configuration by adding DELTA_DIAGONAL_ROD_2
11 years ago
f26f26b7bd
Fix the example delta configuration as someone forgot to do it.
11 years ago
a447e76fdf
Update read me. Added comment about products that have a patent.
11 years ago
f8d173bd0b
Merge pull request #582 from hercek/upstream
...
add command M666 for adjusting delta printer endstop position
11 years ago
9aa2229077
add command M666 for adjusting delta printer endstop position
11 years ago
aa6c58ad37
Merge pull request #575 from buildrob101/DualXCarriageMerge
...
Add duplication and auto-park mode for dual x-carriage support.
11 years ago
221286c10a
Add .gitignore change to ignore .bak files (produced by WinMerge and other editors)
11 years ago
9547fb9dfb
Add duplication and auto-park mode for dual x-carriage support.
11 years ago
62aab66299
Merge pull request #572 from ultimachine/rambo_LCD
...
RAMBo LCD Support, Additional Pins, and Arduino add ons
11 years ago
d7b1a8ba33
add rambo arduino addons
11 years ago
53614e5144
add pins for rambo lcd
11 years ago
b42d24e31e
add additional pins to avr2560 for rambo lcd
11 years ago
07f029c2d5
Merge pull request #563 from njprossi/Marlin_v1
...
Improvment for delta, Honeywell thermistor table and move from panel
11 years ago
b0c8120fcc
Added feedrate setting in exemple config for manual moves from panel
11 years ago
a54fe2d73c
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1
...
Conflicts:
Marlin/Marlin_main.cpp
11 years ago
7ea63d08df
Merge pull request #565 from iXce/avrdudeconfpath
...
Detect OS in Makefile to use the correct avrdude.conf path
11 years ago
4187b637a5
Merge pull request #570 from hg42/separate-INVERTING-macros-for-MIN-and-MAX-endstops
...
separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)
11 years ago
07e7de3600
Merge pull request #569 from hg42/convert-PROTOCOL-macros-from-statements-to-expressions
...
convert PROTOCOL macros from statements to (multiple, comma separated) expressions
11 years ago
c0c4c97db6
Detect OS in Makefile to use the correct avrdude.conf path
11 years ago
2ca983568d
separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)
11 years ago
3700f688f5
convert PROTOCOL macros from statements to (multiple, comma separated) expressions
11 years ago
a504c88346
Fix a bug where the PID controllers D action kicks in hard as soon as the PID controller starts.
11 years ago
c6cb93d38c
Merge pull request #556 from ellensp/Marlin_v1
...
renamed ArduinoAddons/Arduino_1.x.x/sanguino to Sanguino. Now make works...
11 years ago
394ed08f88
Added feedrate setting for manual moves from panel
11 years ago
9bf1cf1b22
Pre-calculate diagonal rod length squared
11 years ago
4623e78ce0
Added Honeywell thermistor 135-104LAF-J01
11 years ago
alexborro