Scott Lahteine
832fe284b4
Merge pull request #5184 from AnHardt/endstop_interrupts
...
Introduce endstop interrupts
8 years ago
Scott Lahteine
2330619da0
Merge pull request #5191 from petrzjunior/const
...
Replace const bool with #define for consistency
8 years ago
Petr Zahradník junior
d7ce5d271b
Replace const bool with #define for consistency
8 years ago
AnHardt
f3eee02596
Introduce endstop interrupts
...
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.
The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.
This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
8 years ago
Scott Lahteine
60cc9342a4
Merge pull request #5188 from thinkyhead/rc_extended_host_support
...
Extended host support: M155 Auto temp report, M115 capabilities
8 years ago
Scott Lahteine
3c9a838651
Extended capabilities report in M115
8 years ago
Scott Lahteine
68b866b5dd
Add M155 - Auto-report temperature with interval
8 years ago
Scott Lahteine
75bfde9945
M155=>M260, M156=>M261
8 years ago
esenapaj
2ae72b0491
Follow up the PR #5167 (Add Turkish Language) again, etc
...
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
8 years ago
Rigid3D
2327764980
Add Turkish Language
8 years ago
Scott Lahteine
2495ab7af2
Make dual_x_carriage_mode an enumeration
8 years ago
Stanley
ab3f966f5f
Case light G-code M355
...
implemented G-Code M355 into Marlin
8 years ago
Scott Lahteine
b6aa894893
Rename auto fan pins and add auto fan flags
8 years ago
Scott Lahteine
627f9d5285
Merge pull request #5056 from thinkyhead/rc_lin_adv_opt
...
LIN_ADVANCE optimizations
8 years ago
Scott Lahteine
0908329d96
Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical
...
Fix manual leveling coordinates
8 years ago
Scott Lahteine
14e60f0d3b
Correct typo in configs
...
As pointed out by #5044
8 years ago
Scott Lahteine
b9109b2875
Improve LIN_ADVANCE commentary (all configs)
8 years ago
Scott Lahteine
4f6bfabaad
Patch BAUDRATE line in configs
8 years ago
Scott Lahteine
1e551c0688
Revert "Squashed - Removal of PID functional range"
8 years ago
Scott Lahteine
00261cbfcb
Merge pull request #4933 from thinkyhead/rc_drop_pid_func_range
...
Squashed - Removal of PID functional range
8 years ago
Scott Lahteine
a0df34fd4c
Add PINS_DEBUGGING advanced config option
8 years ago
Rerouter
5f5d87cad3
Update Configuration.h
8 years ago
Scott Lahteine
d19cfcfc1d
max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK
8 years ago
Scott Lahteine
473f4a17a8
Merge pull request #4914 from Rerouter/PID-Unconstrained-Itemp
...
Pid unconstrained itemp
8 years ago
Scott Lahteine
0d538f3db6
Add to all configurations
8 years ago
Scott Lahteine
fffc9fefa8
Apply changes to all configs
8 years ago
Scott Lahteine
2d2c9bdf92
Add PROBE_Y_FIRST option for probe order
8 years ago
esenapaj
92c03a44a9
Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc.
...
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents
・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h
・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section
・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h
Adjust spacing
About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA
Adjust spacing
8 years ago
Scott Lahteine
ea0dbee3c9
Enable ABL by type, support bilinear on cartesian
8 years ago
Scott Lahteine
8935bed594
MIDDLE_DEAD_ZONE => MIDDLE_DEAD_ZONE_R
8 years ago
Scott Lahteine
dbe41245f1
Merge pull request #4821 from thinkyhead/rc_revert_to_raises
...
Z Raise/Clearance rather than Height
8 years ago
Scott Lahteine
890bade2fa
Additions, mods to SCARA config
8 years ago
Scott Lahteine
01f1028510
Try on "CLEARANCE" for size
8 years ago
Scott Lahteine
0e7d638a7a
Revert to Probe Raise rather than Probe Height
8 years ago
Scott Lahteine
e05af606a8
Clean up probe config options
8 years ago
Scott Lahteine
c4dcfa254e
Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH
8 years ago
Scott Lahteine
e5505e3b33
Allow non-square leveling grid
8 years ago
Scott Lahteine
a1812b55f6
Space out array values
8 years ago
Scott Lahteine
d4599fd8ed
Comment patches to Configuration.h
8 years ago
Scott Lahteine
723e983073
Default EXTRUDE_MAXLENGTH to 200mm
8 years ago
Scott Lahteine
9b0931ef74
Apply fixed EXTRUDER_RUNOUT_PREVENT
8 years ago
Scott Lahteine
74d7f5e57b
Patch SCARA example config
8 years ago
Scott Lahteine
a6f6ed352b
Fix comment on FILAMENT_RUNOUT_SENSOR
8 years ago
Scott Lahteine
aaef7c6b89
Fix a misspelling of minimum
8 years ago
Scott Lahteine
f1201e11c7
Improve the Jerk description
8 years ago
Scott Lahteine
3f038bef00
Heading for movement settings
8 years ago
Scott Lahteine
759234af60
MINIMUM_STEPPER_PULSE option
8 years ago
Scott Lahteine
ab59280075
MIN_SEGMENTS_FOR_MOVE => MIN_STEPS_PER_SEGMENT
...
Follow-up to #4666
8 years ago
Scott Lahteine
01d4703429
PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION
...
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
8 years ago
Scott Lahteine
374f8d2014
dropsegments => MIN_SEGMENTS_FOR_MOVE
8 years ago