8b876241bd
Some more servo code tweaks
...
Just set up the pin. Don't move to a random position.
Simplify servo::move()
* servo::move() does not need the pin parameter - The pin is set during servo_init() with attach().
* servo::move() does not need a return value.
SERVO_LEVELING is the wrong condition to deactivate the servos.
Remove some temporary (Servo *) variables.
SanityCheck for the servo indexes.
9 years ago
90f8ddfc1e
Apply MINIPANEL to other configs
9 years ago
d85861d296
Move macros, add ENABLED/DISABLED, add includes
9 years ago
129f986ccf
Add COREXZ option to configurations
9 years ago
de25a48dec
Remove PID examples from preconfigured configs
9 years ago
391386dd94
Update configs for new servo deactivation
9 years ago
c3c605c658
Move note about LiquidTWI2 to Configuration.h (PR#2406)
9 years ago
dc40a5f6e0
Patch up more outdated config lines
9 years ago
a274769f4f
Clean up spacing and comments
...
Also clean up some trailing spaces in a few other sources
9 years ago
d3bce05d54
Fix up spacing for filament sensor values
9 years ago
b4b10a57fe
Fix configurator section directives and values lists
9 years ago
bba14dcbe6
Move Z Safe Homing point to the middle of the movement range
9 years ago
58941e543e
ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed
...
#defining something just to define something else doesn’t
make sense
If you want SDCARDDETECTINVERTED, just define it yourself.
If the previous code was intended to define, undefined and then again define the term, that code is improper.
9 years ago
08968c29bb
Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples
9 years ago
d1f4471000
Merge pull request #2146 from Wackerbarth/Versioning
...
Versioning
9 years ago
d46d9d998e
Add maximum bed integral term in example configurations.
9 years ago
b5743d6927
Use SOURCE_CODE_URL rather than FIRMWARE_URL
9 years ago
5ea139fd79
Revised Versioning mechanism
9 years ago
38cc0b93c6
Merge pull request #1874 from AnHardt/Bulgarian
...
Introduction of Bulgarian - language_bg.h
9 years ago
9d1961ebe3
Witbox and Hephestos are just RAMPS_13_EFB
9 years ago
082ed3beed
Propagate Configuration.h changes
...
Updated all the example Configuration.h files for the new display type.
9 years ago
e353d27430
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian
9 years ago
2445ae3d3a
Combine thermal runaway and watch-period
...
- Make thermal protection for all hotends and/or bed into simple
switches
- Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is
enabled
- Move detailed thermal parameters to `Configuration_adv.h`
- Add sanity checks to warn about old configurations
- Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds
9 years ago
7f3252eea9
Merge pull request #1999 from paclema/Filrunout_configurable_script
...
Added configurable script for filrunout from configuration.h
9 years ago
181ccc884c
Edit thermal runaway description
9 years ago
aedd580911
Updated all configuration.h examples
9 years ago
425cd46c12
Merge pull request #1993 from AnHardt/TRP-bed
...
Enable TRP for the bed
9 years ago
514d8ac460
Enable TRP for the bed
...
in all Configurations.
9 years ago
2610b8d047
Enable thermal runaway protection by default
9 years ago
b4b19a6cbd
Merge https://github.com/MarlinFirmware/Marlin into Bulgarian
...
Conflicts:
Marlin/Configuration.h
Marlin/configurator/config/Configuration.h
Marlin/example_configurations/Felix/Configuration.h
Marlin/example_configurations/Felix/Configuration_DUAL.h
Marlin/example_configurations/Hephestos/Configuration.h
Marlin/example_configurations/K8200/Configuration.h
Marlin/example_configurations/SCARA/Configuration.h
Marlin/example_configurations/WITBOX/Configuration.h
Marlin/example_configurations/delta/generic/Configuration.h
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Marlin/example_configurations/makibox/Configuration.h
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Conflicts with my Chinese implementation resolved.
9 years ago
0970102950
Remove obsolete STRING_URL
9 years ago
6cba6bcd82
Add 'cn' to the other 'Configuration.h's
9 years ago
5c29fda167
Add a warning for DISABLE_[XYZ] options
9 years ago
3b97a7d446
Merge pull request #1944 from AnHardt/beep2
...
More Beeper clean up
9 years ago
064f2b37d0
More Beeper clean up.
...
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().
Enforced max. duration for M300 to 5 seconds.
Corrected description in 'Configuration.h'
LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
9 years ago
b99e63a7bf
Fixed compilation error "error: stray ‘\357’ in program" in several configuration files.
...
Introduced in commit 697ee2dc
9 years ago
ccddc280be
Apply three more commits
9 years ago
74e4b42f7e
Default MACHINE_NAME to "3D Printer"
9 years ago
c6bb98abad
machine name for hephestos too
9 years ago
ccbe2c4ea3
Apply CUSTOM_MACHINE_NAME to configurations
...
- Replace “Mendel” with “RepRap”
9 years ago
56fc3a4835
bgr -> bg
...
+ update in documentation
9 years ago
585eee6549
Z Probe inverting not present in example configs, causes error
...
The line const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to
invert the logic of the endstop is in the main configuration.h but
wasn't present in the example configuration.h's. Causes a compiling
error with Z Probe enabled. Just added it to all the configs. :)
9 years ago
c5961892e3
Bulgarian for all the Configuration.h's
9 years ago
4788b59300
Thermistor values for configurator
9 years ago
7431ef7e2d
Merge branch 'Development' into dev_version
...
Latest upstream commits
9 years ago
eb6e3886f4
Set version to "1.0.3 dev"
9 years ago
a9ed39b12d
Moved checks into SanityCheck.h + removed previous added checks.
9 years ago
002340f32c
Merge branch 'Development-Marlin' into Development
9 years ago
967db181d0
Latest upstream commits
9 years ago
d27c82a450
Added check for Delta printers in Mesh, #error not yet supported.
9 years ago
AnHardt