961998cf91
Merge pull request #1496 from thinkyhead/issue_1493
...
Megatronics 3 servo pins
11 years ago
59e92a2db4
Merge pull request #1506 from thinkyhead/issue_1504
...
Issue #1504 – K8200 Z_ENABLE_PIN
11 years ago
b71322e793
Issue #1504 – K8200 Z_ENABLE_PIN
...
- K8200 uses a non-standard RAMPS with Z_ENABLE=63 ??
- Assuming from previous input that 3DRAG is the same.
11 years ago
7c6236761a
Merge branch 'Development' into issue_1493
...
Merging latest upstream changes
11 years ago
afc737ca0c
Fix CoreXY Homing Routine.
...
Fixed how stepper ISR figure it out when the head (extruder) is going to
Min or Max direction.
Added Homing to Max Endstops.
11 years ago
7866fa161f
Merge pull request #1476 from Natealus/Development
...
Compiling errors with 4 Extruders defined and Viki 2 Implementation
11 years ago
8cfdd3e8a4
Merge pull request #1423 from MoonCactus/Development
...
Multi-line G-code commands
11 years ago
ea9e49b20d
ARRAY_BY_EXTRUDERS 4th hotend PID parameters
11 years ago
d0ad8a978c
Megatronics 3 servo pins
...
- Naive implementation, assuming the data sheet pin numbers correspond
to Arduino pin numbers.
11 years ago
22a7985445
reverted to upstream
11 years ago
b3bda57ca2
reverted to upstream
11 years ago
9d75a56b56
Merge remote-tracking branch 'upstream/Development' into Development
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
11 years ago
d75cd69de4
Merge pull request #1488 from Wurstnase/Development
...
Bedleveling: X and Y must be Integers not Float!
11 years ago
eb5889b3da
Merge pull request #1479 from AnHardt/en_first
...
#include "language_en.h" before the national language in language.h
11 years ago
4546c92f5b
X and Y must be Integers not Float!
...
https://github.com/Wurstnase/Marlin/blob/Development/Marlin/Configuration.h#L427
11 years ago
32d4dd073f
Merge pull request #1487 from AnHardt/iss1485
...
Fix for #1485
11 years ago
f92b0dc6c7
Merge pull request #1486 from Souko/patch-1
...
Update ultralcd_st7920_u8glib_rrd.h
11 years ago
c246026bda
Sorry.
11 years ago
07e488cfae
Fix for #1485
11 years ago
e7ecf14d0c
Update ultralcd_st7920_u8glib_rrd.h
...
Fixed delay-times during Init. REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER won't get initialized on some Boards because delay was to short.
11 years ago
8be25389f2
Merge pull request #1477 from AnHardt/languagetoconfig
...
Make display language configurable in Configuration.h
11 years ago
f4b0a40abb
Additional fixes to temperature.cpp and found another missing line
...
Looks like INVERT_E3_DIR was missing in the configuration.h also as I
did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also
added those lines too. Additional formatting to make the comments line
up better in that section.
11 years ago
3aac2df057
Now the oter way around.
...
Include of language_en.h now behind national language.
All "#define MSG_STR_*" now surrounded by #ifndef and #endif.
11 years ago
488633bf44
#include "language_en.h" before the national language in language.h
...
+ May decrease the workload for feature developers. They may omit to
update all the language files but "language_en.h". When loading _en
first, all new features give some display, but the new in English.
- May throw some additional warnings about redefinition during compile.
11 years ago
8e92729141
Make display language configurable in Configuration.h
11 years ago
38a500d05c
Viki 2 Implementation
...
I've insert the define and pointer entries for the Viki 2 and miniViki
from Panucatt in all of the example configs and main config. With these
additions and with pins done in the old single pin.h style...I was able
to get the display working fine save for needing to turn Delta Segments
per Second down. But that's a common graphics lcd issue being looked
into right now.
I need assistance in understanding how the new divided pins files fit
together because my previous attempts at trying to get it to work
appropriately didn't seem successful. This originally came from trying
to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg
X3 Pro. It only comes with one set of connectors and they're Min
Endstops. My previous experience didn't turn out well trying to tell the
firmware to home to the Min Endstops so the best solution I found was to
swap the pins in the firmware. If I'm missing a conflict with a setup
other than delta please let me know, but it makes sense in my setup.
11 years ago
697ee2dc50
Compiling errors with 4 Extruders defined
...
Here were a few changes that I had to make/add lines for the 4th hotend.
A compiling problem in the Temperature.cpp and missing lines in
configuration.h and configuration_adv.h. I added these lines in all of
the example configs too.
11 years ago
85e5aa4011
Generalized enqueue_commands_P, and moved them to Marlin_main as they should
11 years ago
c093ea36e6
Merge pull request #1472 from thinkyhead/issue_1471_fix
...
Fan speed and 4th extruder on graphical LCD
11 years ago
aa67b38a44
Fan speed and 4th extruder on graphical LCD
...
- Display fan speed 0-1 as “—“ and 254-255 as “100%”.
- Display 4th extruder instead of the heated bed
11 years ago
1a3c7d91f1
Merge pull request #1470 from thinkyhead/fix_eeprom_typo
...
Fix bad typo in ConfigurationStore.cpp
11 years ago
72856166a9
Fix bad typo in ConfigurationStore.cpp
11 years ago
3490a19103
Merge pull request #1466 from CONSULitAS/Development_K8200_de
...
K8200: Example Configuration.h fixed
11 years ago
cfbb94a2a8
K8200: Example Configuration.h fixed
...
Example Configuration.h: fixed strange white characters preventing
compilation in lines 1 and 3 - oops
11 years ago
b65c5d8ec6
Merge pull request #1464 from AnHardt/iss1448-Menu
...
Unified menu selection - by hilighting - made first column avilable
11 years ago
6250cc9a8d
Merge pull request #1465 from CONSULitAS/Development_K8200_de
...
K8200: Example Configurations back in sync and readme update
11 years ago
0de5083aff
K8200: Example Configurations readme.md updated
...
Example Configurations for K8200 readme.md updated
* readme.md: added description for german umlaut support on LCD
11 years ago
c421ffd520
K8200: Example Configuration_adv.h back in sync
...
Example Configuration_adv.h for K8200 back in sync
* Configuration_adv.h: rebased and added missing changes for 4th
extruder
11 years ago
0575dd10de
K8200: Example Configuration.h back in sync
...
Example Configuration.h for K8200 back in sync
* Configuration.h: rebased and added missing changes
* Configuration.h: updated comments for K8200
11 years ago
f708884808
Introduced new function lcd_implementation_mark_as_selected()
...
New function now drops the prechar (select character) and makes the first
column usable for text.
Marking the line is now constantly made by highlighting (reverse).
Replaced selection code in:
lcd_implementation_drawmenu_generic()
_drawmenu_setting_edit_generic()
_drawmenu_sd()
with new function.
11 years ago
b6ca50a2cc
Merge pull request #1463 from thinkyhead/cleanup_recent_merge
...
Apply some cleanup for recent merge
11 years ago
cc56f36870
Merge pull request #1461 from thinkyhead/issue_1453_redo
...
Apply fix for M600 filament change
11 years ago
8663f4bbaf
Apply some cleanup for recent merge
...
Combine 1/(rows+1) with u8g.getHeight() to get rowHeight and just use
that.
11 years ago
fed931afda
Merge pull request #1462 from AnHardt/iss1447-Edit
...
Fixes issue #1447 - Overlapping of long descriptions with values.
11 years ago
0cb1029311
remove extra plan_buffer_line
11 years ago
9381bfe7f9
Fixes issue #1447 - Overlapping of long descriptions with values.
11 years ago
b97a950f53
Apply fix for M600 filament change
...
- Patch from #1453 for delta movement plan
- Fix: Set X with code X instead of adding to X
11 years ago
04ce708031
Merge pull request #1457 from AnHardt/bootsplash
...
Reworked bootsplash for DOGM displays another time - saved 1786 bytes
11 years ago
0e41882b5c
Merge https://github.com/MarlinFirmware/Marlin into bootsplash
11 years ago
2abf1ad940
Distribute recent changes in Configuration.h to the examples.
11 years ago
Scott Lahteine