Erik van der Zalm
abb7e63906
fixed z-disable bug.
13 years ago
Erik van der Zalm
9f139d6e0e
Added MAX6675 support. (Thanks to gregfrost)
...
Needs some work to remove the blocking in read max6675.
13 years ago
Erik van der Zalm
e45e5c68bb
Added support for Gen3+ (Pins file only)
...
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
13 years ago
haxar
6cc6029d7a
M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print
13 years ago
Bernhard
157aa7f2fd
m115 eol fix
13 years ago
Bernhard
7aeb45303d
small mistake
13 years ago
Bernhard
cee5f9020a
added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.
13 years ago
Bernhard
3814bbb529
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
13 years ago
Bernhard
729cde4475
fix autostart failure if in wrong directory
13 years ago
Bernhard
396270a0de
fix duplicated definition of MOSI MISO pins in case motherboard==33
13 years ago
Bernhard
11f2dafc4e
one step closer to a functional makefile..
13 years ago
Bernhard
8463e39a4a
starting with sanguino arduino 1.0 compatibility
13 years ago
Bernhard
2bc160a978
add wiring.h, that can be used to overwrite:
...
arduino-0023/hardware/arduino/cores/arduino/wiring.h
this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino
13 years ago
Bernhard
57f9359a41
simplified the includes, makefile now works with arduino23
13 years ago
Bernhard
3c1a4aac2b
header file simplification
13 years ago
Bernhard
212515148e
added m240 photography support. default off
13 years ago
Bernhard
6735025428
cooldown
13 years ago
Bernhard
415aadf704
lcd panel bed support
...
advance and ultipanel not any more in default config
13 years ago
Erik van der Zalm
554cc1718d
Fiexed E_ENABLE_PIN errors
13 years ago
Erik van der Zalm
617968ab76
G92 fix
13 years ago
Erik van der Zalm
84d9cf7339
merging
13 years ago
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
13 years ago
Bernhard
3320a5b37d
make autotemp compatile for use without pid
13 years ago
Bernhard
06411d5c9e
ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.
13 years ago
Bernhard
82c99625fa
instant stop of sd prints from the panel.
13 years ago
Bernhard
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
13 years ago
Bernhard
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
13 years ago
Bernhard
b1d84d879b
st_synchronize back to normal..
13 years ago
Bernhard Kubicek
f6fe7143e4
Merge pull request #29 from k-eex/Marlin_v1
...
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
13 years ago
Bernhard
dde4b40fa9
disable steppers in runout prevention
13 years ago
Bernhard
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
13 years ago
Bernhard
aa4f9a6474
better values.
13 years ago
Bernhard
87fd249c43
made runout prevention independent of tempeorarily set esteps
13 years ago
Bernhard
1ec0c3b68a
extruder runout prevention.
13 years ago
Bernhard
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
13 years ago
Bernhard
cc4a9cdb69
added autostart procedure trigger to the ultralcd menu
13 years ago
Bernhard
61c943b4bf
fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.
13 years ago
Keegi
bae1e422f6
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
13 years ago
Bernhard
754d2d69b2
z homing sound fix, for now until the actual cause is found..
13 years ago
Bernhard
986f0ba76c
moved <stdio.h> to more dominant location.
13 years ago
Bernhard
460b788d78
repaired homing position setting.
13 years ago
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
13 years ago
Bernhard
12e8edcac3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
Bernhard
cf50ba140f
added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.
13 years ago
Erik van der Zalm
89e832c295
Update endstops only for homing. (use less resources when not used)
13 years ago
Erik van der Zalm
b99c49ec3b
Add option to only check endstop when homing
13 years ago
Erik van der Zalm
95a0b28acb
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
Erik van der Zalm
af22e9cd38
Some advance modifications
13 years ago
Bernhard
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
...
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
13 years ago
Bernhard
dfd240b260
overworked autotemp, removed one layer of nesting from the ultralcd.
13 years ago