63cc0744d6
Support for EinsyRambo 0.3; improved M119 and M914
...
- Now supports EinsyRambo 0.3
- M119 now shows average stallguard values for previous planner motion.
- M914 now disables stealthchop to allow SGT to be hand-tuned.
- Now using SERIAL_ECHO rather than SERIAL_PROTOCOL.
- M914 now allows negative values without overflow.
7 years ago
52fe770eb2
Added experimental features stallguard on E0.
7 years ago
d093e34f80
Merge branch 'marlin-1.1.5-einsyrambo' of ssh://code.alephobjects.com/diffusion/MARLIN/marlin into marlin-1.1.5-einsyrambo
7 years ago
811c40780a
Improvements to support for EinsyRambo.
7 years ago
ad656d76c7
Initial check in of branch for EinsyRambo.
7 years ago
c00305ae40
Adjustment to autostart and M226 for QA
...
Made changed requested by Logan fori testing jigs in production.
- Fixed "auto0.g" autostart which was not working.
- Made it so M226 works on protected pins:
- There are no longer protected pins
- However, will only work on pins that are already inputs (like endstops)
7 years ago
0cbe9d41d6
Various fixes.
...
- Restored MIN_TEMP error on disconnecting head.
- Restored WORKSPACE_OFFSETS (as requested by forum user).
7 years ago
c9fb50d055
Fixed problem where controller fan was not running
7 years ago
3817fdfadd
Merge 'origin/upstream_1.1.5' into devel
7 years ago
3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
...
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
7 years ago
0067bb2840
Addressing #7552
...
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
7 years ago
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
7 years ago
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
7 years ago
b9a5891741
Added ability to manually enable/disable probe pin
7 years ago
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
7 years ago
b94a1c6b9f
Code reduction this some configurations
...
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
7 years ago
4817b39d98
Added new feature for AutoParking Extruder (APE)
7 years ago
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
7 years ago
258e128116
Changes for Yellowfin toolhead.
...
- Suppress warning about homing toolhead when switching extruder with T0/T1
- Adjusted max feedrate for Yellowfin.
7 years ago
30887feae3
Tweak some formatting in ABL G29
7 years ago
257b693ab0
Advanced pause fixes ( #7518 )
...
* Disallow filament change while paused
* Use kinematic movemements in pause_print and resume_print
7 years ago
06541ec885
Merge pull request #7448 from thinkyhead/bf1_delta_fixes
...
Prevent damage if DELTA_HEIGHT is set badly
7 years ago
96ae53cf41
Use MOVE_SERVO macro where possible
7 years ago
ac76101ec3
Eliminate goto in gcode_M48
7 years ago
75e6ead5fd
Eliminate goto in gcode_G33
7 years ago
6bd63d27b5
Updates to G29 for probe error handling
7 years ago
f54e0fc90f
Prevent damage if DELTA_HEIGHT is incorrect
7 years ago
0938c62b48
Neater position_is_reachable call
7 years ago
1fc0a8f206
Fix for Z-endstop failure in .22
7 years ago
891b29783b
For backwards compatibility, G26 now calls M999
7 years ago
e948f77cf9
Fix DUAL_X_CARRIAGE not moving at all
...
Axis would only move when homing.
Bug introduced in 91841d75c9Fixes #6956 , fixes #7050 and fixes #7291
7 years ago
08b0456d91
Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
...
Manual Bed Leveling: Goto previous Z height at each probe point
7 years ago
936d00dda8
Implement probing delay for piezo sensors
7 years ago
29eef360d0
Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
...
Fixes for FWRETRACT
7 years ago
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
7 years ago
bfd396c13a
Patch to fix some compiler warnings
7 years ago
48c5f3dddf
Tweak kill action #ifdef
7 years ago
be7a9a07c5
Don't reset grid with `G29 Q` + PROBE_MANUALLY
7 years ago
4eff18854b
Rename options with swap_ prefix
7 years ago
14482d2f2a
Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo
7 years ago
9fc72422e4
Don't let the flow multiplier affect retract/recover length
7 years ago
fee696db5d
Improve retract() for G10/G11/autoretract
7 years ago
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
7 years ago
51864fd365
Add bed size as a configuration option
7 years ago
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
7 years ago
b7a16e4468
Merge pull request #7315 from fixoid/patch-1
...
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
7 years ago
b0173ccdb9
Drop extra initializers for vars initialized by EEPROM code
7 years ago
77c1c642cf
Fixes for Yellowfin dual. Fixed heating mesg.
7 years ago
c847b8a947
Added "Cooling" messages.
7 years ago
7afafb05b8
Split G10/G11 into separate functions
7 years ago
Marcio Teixeira