a96dadb94e
Tuned STEALTHCHOP for successful print.
7 years ago
e2568d7589
Fix delta_safe_distance_from_top
7 years ago
0b1d754e7d
Fix G42
7 years ago
c864f864ee
Fixes to the way COOLSTEP was being implemented.
7 years ago
bbc2ee6da1
Don't re-init graphical LCD after boot screen
...
Followup to 13a3fb1acc
7 years ago
198b138c91
Fix for build error on models without LCDs.
7 years ago
1556ee2280
Fix for garbled LCD status error and Mini 2 homing.
...
- Modified calls to lcd status to use strings in PROGMEM to prevent garbled
text from showing up.
- Disabled COOLSTEP during homing on Mini 2 to allow stallguard to function.
7 years ago
b57901c6bb
Probe fill now uses kill() instead of stop().
...
- Attempt to solve bug where printer continues to heat extruders
after probe fail.
7 years ago
b42162f2d6
Experimental hybrid COOLSTEP and STEALTHCHOP mode.
...
- Added code for averaging TSTEPs during moves and displaying them
with M119 (for tuning purposes).
- Added experimental mode that uses STEALTHCHOP during slow moves,
and COOLSTEP during faster moves.
7 years ago
6ebf8ea230
Merge pull request #8496 from GMagician/tool-change-fix-1.0
...
[1.1.x] tool change bad behaviours
7 years ago
5af33c0263
Fixed Trinamic current reporting.
...
- Adjusted current for Mini 2.
7 years ago
b96ceb4256
[1.1.x] tool change bad behaviours
...
This PR will address two issues reported in #8492 . Just one is left because I don't know if it is an issue or not
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
2) Since no move no bed level matrix should be applied
When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
7 years ago
b6dbc4c5c1
Merge pull request #8426 from SteveGotthardt/bugfixes
...
[1.1.x]Update Anet A8 default values from my Anet A8 experience
7 years ago
0cf6894c71
M115 now identifies itself as an LCD model.
7 years ago
d2ca6b814e
Changes to rewipe sequence.
...
- Change rewipe attempts from 1 to 3.
- Change number of rewipe strokes from 2 to 12.
- Move extruder to position zero before halting.
7 years ago
12b018e619
Merge pull request #8487 from Bob-the-Kuhn/M43-compatibility-1.1.x
...
[1.1.x] M43 end pin correction/compatibility
7 years ago
9b80e1e04a
change to L for end pin for M43 Toggle command
7 years ago
bf6a1816b4
Display volumetric ratio in terms of E mm
7 years ago
4f05a66ee1
Fixes #8472
7 years ago
dcc9b0d437
Merge pull request #8458 from thinkyhead/bf1_no_mesh_alter
...
[1.1] No retroactive adjustment with M851 Z
7 years ago
622d100c30
No retroactive changes with M851 Z
7 years ago
74997a5251
Fix comment in planner.h
7 years ago
50148f7185
Update the UBL Probable Area for Delta's
...
This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
7 years ago
8f57a3e28a
Apply coding standards to Max7219 code
7 years ago
09f0413cf7
Improvements for Mini 2.
...
- Added printer variant using non-geared direct-drive Z belts.
- Added experimental support for LED lighting.
7 years ago
2511e869e2
Update Configuration.h
7 years ago
aa612124f2
Merge pull request #8452 from tcm0116/1.1.x-pio_deps
...
[1.1.x] Fix PlatformIO dependencies
7 years ago
3e050fb35a
Merge pull request #8454 from GMagician/1.1.x-gitignore
...
[1.1] gitignore visual studio update
7 years ago
3dee10636c
Merge pull request #8459 from thinkyhead/bf1_filwidth_fix
...
[1.1] Fix FILAMENT_LCD_DISPLAY, disabled state, optimize
7 years ago
eb3bdb7550
Fix FILAMENT_LCD_DISPLAY, disabled state, optimize
7 years ago
33fdb9ab8b
[1.1] visual studio update
...
aligned with marlin 2.0 gitgnore to support visual studio community edition
7 years ago
97c19de8b9
Fix PlatformIO dependencies
7 years ago
20ec0a64cb
Added COOLSTEP automatic motor current adjustment.
...
- Enabled COOLSTEP for automatic motor current adjustment on Einsy board.
- Update M119 to show current current settings.
- Added auto reporting of current adjustment during prints for debugging.
7 years ago
4e19c59ab3
Miscellaneous cleanup
7 years ago
47b15b3722
Added experimental speedy variant of Mini 2.
...
- Added test Mini 2 variant with direct drive Z.
- Added selector for variants with and without gearboxen.
- Eliminated deprecated Gladiola/Einsy combo.
7 years ago
b0facd5923
Changed order of probe points.
7 years ago
9cf5b96971
Fix M503 output for M145
...
Fixes #7978
7 years ago
0eed5e0667
Merge pull request #8437 from thinkyhead/bf1_thermistor_ov
...
[1.1] Add OV() macro for thermistor tables
7 years ago
69a710fef1
Add OV() macro for thermistor tables
7 years ago
d2613ce077
Merge pull request #8432 from thinkyhead/bf1_fix_M32_subroutines
...
[1.1] Fix 'M32 P' subroutines
7 years ago
f2e222b9e8
Merge pull request #8419 from RowanMeara/rm-dithering-1.1.x
...
[1.1.x] Fix Software Fan PWM
7 years ago
a6ee4a0468
Apply SDCARD_SORT_ALPHA changes from 2.0.x
7 years ago
d3b8f30818
Fix M32 P subroutine handling
7 years ago
2390f6d3ab
Cleanup, apply standards to SD lib, cardreader
7 years ago
d8b1343279
Merge pull request #8431 from thinkyhead/bf1_fix_parser_value
...
[1.1] Fix parser value handling
7 years ago
eacb6b6e8b
Fix parser value handling
7 years ago
8256cfe174
Fix for corrupted error messages on temp error.
...
- Ultralcd stores a pointer to the buffer passed into it,
so this buffer cannot be stored on the stack.
7 years ago
794ba894f0
Only build correct model/toolhead combinations.
7 years ago
7efffc1548
Update Anet A8 default values from my Anet A8 experience
7 years ago
e424c926a8
Changed default bed leveling to LINEAR.
7 years ago
Marcio Teixeira