6ac9d895ca
Tweak Filament Width variables
8 years ago
e9bfca5870
Additional comments for Temperature::isr
8 years ago
37ac540a26
Fix unsigned/signed comparison in fanPin loop
8 years ago
27b80b1dd1
Merge pull request #4667 from thinkyhead/rc_M211_sw_endstop_switch
...
M211: Enable/Disable Software Endstops
8 years ago
2f223b8c79
Use ABC and XYZ for "3"
8 years ago
01d4703429
PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION
...
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
8 years ago
3a0a94b21a
Always init configured fan pins
8 years ago
c63003ed3e
Use matching auto-fan flags
8 years ago
3475fd7b0f
Init PWM-able auto fan pins with `SET_OUTPUT`
8 years ago
abf9696db1
Loop fan-pins based on array size
8 years ago
e88575c8ec
Init next_auto_fan_check_ms to zero
8 years ago
b63d70b186
Fix serial output for MBL, M303
8 years ago
b7b5b50a84
Throw bed min temp error only if heating
8 years ago
d3ba878f70
Drop intermediate float in HEATER_0_USES_MAX6675 test
8 years ago
3e8f9ecd1c
Extend min/max_temp_error for the bed
8 years ago
aa9b52b2e7
MISO is an input
8 years ago
9ab94bd2c1
fix-babysrepping
8 years ago
63fd1f49a6
PID_EXTRUSION_SCALING, disabled by default
8 years ago
e4942d2163
Switch SD2cadrLib to fastio
...
Replace all fastDigitalRead/Write() with READ/WRITE()
Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.
Remove these conditional pin definitions from the pin-files. They are now always defined.
Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
8 years ago
2d378fac1b
No need to include thermistortables.h in Configuration.h
8 years ago
d8f2876753
Replace some float division with multiplication
8 years ago
f8b5749235
Replace division in planner with multiplication
8 years ago
3ebad4e020
Moves all global enums to a central file
8 years ago
c2c8ab4698
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
8 years ago
cdd77d23bb
Neaten up temperature member data
8 years ago
d4c68279c8
Add "P" parameter to M302
8 years ago
11dcbae7a2
Only a single E axis. Can tool-change reseed position[E_AXIS]?
8 years ago
182c8d7f8f
Dyze High Temp Thermistor Support
9 years ago
ee0983ab57
Further reduction when HOTENDS == 1
9 years ago
b72238f406
Invariant get_pid_output with HOTENDS < 2
9 years ago
a129078927
Add an emergency-command parser to MarlinSerial (supporting M108)
...
Add an emergency-command parser to MarlinSerial's RX interrupt.
The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.
To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.
This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".
The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.
One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"
Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.
Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
9 years ago
bd491818d6
Reduce storage requirements for strings, make some PGM
9 years ago
7b2fadd598
Apply some fixes from Andreas
...
Derived from
https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56
7f8d8e0dd
9 years ago
dcb8ec32ee
Fix compile error with watch_bed_next_ms
9 years ago
ee5be92206
Fix broken DISABLE_HEATER macro
9 years ago
e2d4919c01
Merge pull request #3991 from thinkyhead/rc_axis_units
...
Rename some vars to clarify their relationship to acceleration
9 years ago
72c6f2923f
axis_steps_per_unit => axis_steps_per_mm
9 years ago
3c68be79dc
Throw an error in PID_autotune for E < -1
9 years ago
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
9 years ago
3fd9b331f0
Merge pull request #3924 from thinkyhead/rc_statics_temperature
...
Apply static to Temperature class
9 years ago
78fb02a5ad
Apply static to Temperature class
9 years ago
fad7680605
Slower SPI speed for MAX31855
9 years ago
0c7c45063b
PID_ADD_EXTRUSION_RATE based on MarlinKimbra
9 years ago
8218558953
Update comments, rename next_ping_ms, followup to #3797
9 years ago
58339aea5f
Merge pull request #3769 from jbrazio/bugfix/iteration-invokes-undef-behavior
...
Bugfix: iteration invokes undefined behavior
9 years ago
2f14934c65
Fix checkExtruderAutoFans
...
Make sure to only set the fan state once when extruders share a fan
9 years ago
ecd490ed49
Bugfix: iteration invokes undefined behavior
9 years ago
4d6bb52b26
Don't try to enable unused auto fans
...
Addressing #3743
9 years ago
9b92bb8f31
Set the initial state based on target temperature
9 years ago
6b13c430ae
The TRReset state is not needed with fall-through
9 years ago
Scott Lahteine