Scott Lahteine
2511e869e2
Update Configuration.h
7 years ago
Scott Lahteine
aa612124f2
Merge pull request #8452 from tcm0116/1.1.x-pio_deps
...
[1.1.x] Fix PlatformIO dependencies
7 years ago
Scott Lahteine
eb3bdb7550
Fix FILAMENT_LCD_DISPLAY, disabled state, optimize
7 years ago
Thomas Moore
97c19de8b9
Fix PlatformIO dependencies
7 years ago
Scott Lahteine
4e19c59ab3
Miscellaneous cleanup
7 years ago
Scott Lahteine
9cf5b96971
Fix M503 output for M145
...
Fixes #7978
7 years ago
Scott Lahteine
69a710fef1
Add OV() macro for thermistor tables
7 years ago
Scott Lahteine
d2613ce077
Merge pull request #8432 from thinkyhead/bf1_fix_M32_subroutines
...
[1.1] Fix 'M32 P' subroutines
7 years ago
Scott Lahteine
f2e222b9e8
Merge pull request #8419 from RowanMeara/rm-dithering-1.1.x
...
[1.1.x] Fix Software Fan PWM
7 years ago
Scott Lahteine
a6ee4a0468
Apply SDCARD_SORT_ALPHA changes from 2.0.x
7 years ago
Scott Lahteine
d3b8f30818
Fix M32 P subroutine handling
7 years ago
Scott Lahteine
2390f6d3ab
Cleanup, apply standards to SD lib, cardreader
7 years ago
Scott Lahteine
eacb6b6e8b
Fix parser value handling
7 years ago
Steven Gotthardt
7efffc1548
Update Anet A8 default values from my Anet A8 experience
7 years ago
RowanMeara
10e366ebd7
Change dithering behavior to intended.
7 years ago
Scott Lahteine
95590adf07
Make sure `leveled[]` is enabled for use
7 years ago
Scott Lahteine
8d06cf7b84
Add M114_DETAIL to Configuration_adv.h
7 years ago
Steven Gotthardt
645b586041
Fix warnings for REPRAPWORLD_KEYPAD
7 years ago
Scott Lahteine
069ec3f9a9
Move Filament Width Sensor to Configuration_adv.h
7 years ago
Scott Lahteine
56035e9965
Move mesh test options under G26 option
7 years ago
Scott Lahteine
d65c99f38b
Drop unused LARGE_FLASH option
7 years ago
Scott Lahteine
90c7d28055
Extrudrboard support for Printrboard Rev.F
7 years ago
Scott Lahteine
8b684637bc
Merge pull request #8397 from RowanMeara/rm-M428-1.1.x
...
[1.1.x] Fix M428
7 years ago
Rowan Meara
d2df00bfca
[1.1.x] Fix compilation warnings ( #8395 )
...
* Fix up Travis CI and compile warnings/errors
* No ULTRA_LCD with REPRAP_DISCOUNT_SMART_CONTROLLER
* No point in setting all the endstop plugs
7 years ago
Scott Lahteine
25ec0fecfa
Apply native workspace fixes to G92, G53-59
7 years ago
RowanMeara
227b96b28b
Fix M428
...
This fixes the old implementation of M428 which was broken, did not
match the website, and made no sense.
7 years ago
Scott Lahteine
a2c013c8c7
Fix LCD pins for Printrboard v1
7 years ago
Scott Lahteine
f27196214b
Fix Printrboard pins for parity with 2.0
7 years ago
Scott Lahteine
aa616cd410
No leveling data in M114 without leveling
7 years ago
Scott Lahteine
5926159890
Fix report_current_position
...
Thanks @RowanMeara!
7 years ago
Roxy-3D
c9f88297b8
Provide more clearance for BL-Touch probe
7 years ago
Scott Lahteine
5cc87abb3a
Merge pull request #8381 from thinkyhead/bf1_native_followup
...
[1.1] Remove offsets from soft endstops, tool change
7 years ago
Scott Lahteine
355dfed437
Coding standard patch of M290
7 years ago
Scott Lahteine
802ae73b13
Turn off laser power pin when PWM goes to 0
7 years ago
Scott Lahteine
549c814e8d
Remove offsets from soft endstops, tool change
7 years ago
Scott Lahteine
564fbc8dec
M290 constrain patch
7 years ago
Scott Lahteine
df44bcc5ae
Use do_blocking_move_to where possible
7 years ago
Scott Lahteine
3293823642
Add pre-calculated planner.e_factor
7 years ago
Scott Lahteine
24b302c001
Fix cold/lengthy extrusion handling
7 years ago
Thomas Moore
4714fb8fcb
Normalize load/unload length in M600
7 years ago
Scott Lahteine
b0ff3a4c6d
Cleanup around updatePID
7 years ago
Scott Lahteine
7aadfe32e7
Prevent position_is_reachable disaster
7 years ago
LVD-AC
8ce9306b27
PROBE_SELECTED etc.
7 years ago
Scott Lahteine
80682ec61e
Updates Traditional Chinese, rebase for bugfix-1.1.x
7 years ago
Scott Lahteine
deaa70c2cc
Update macros for parity with 2.0.x
7 years ago
Scott Lahteine
7535c21894
Remove some trailing white-space
7 years ago
Roxy-3D
8327667988
Correct gMax 1.5+ nozzle size to the right number
...
Also... Doing a 'Direct Commit' to see if that is 'acceptable' for small changes like this. I want to look at the commit history and see how the logs handle this type of change.
7 years ago
Scott Lahteine
b6b4bf0959
Merge pull request #8345 from tcm0116/1.1.x-delta_height
...
[1.1.x] Add delta_height variable in lieu of using home_offset
7 years ago
Thomas Moore
658e1ebe5a
Add delta_height variable in lieu of using home_offset
7 years ago
Scott Lahteine
54963cc898
Fix _manual_goto_xy on kinematic systems
7 years ago
Scott Lahteine
ad879a1f90
Clarify some motion code
7 years ago
Scott Lahteine
513f25d42c
Remove redundant dual stepper driver entries
7 years ago
Scott Lahteine
2559745f54
Tweaks to core motion code
7 years ago
Scott Lahteine
7326fe1136
Fix tilt_mesh_based_on_probed_grid output bug
7 years ago
Scott Lahteine
97a43f0c2f
Fix G26 Y position argument
7 years ago
Scott Lahteine
87b655e59e
Fix gcode_get_destination E axis
7 years ago
Roxy-3D
677d490b5c
Add defaults for basic extrusion to Configuration.h files ( #8331 )
7 years ago
Roxy-3D
6ee4ba6932
We need motion even with !HAS_MESH ( #8330 )
...
Thank You MagoKimbra !
7 years ago
Scott Lahteine
4a857f1af6
Followup to G33/LCD patch #8318
7 years ago
Scott Lahteine
1d0739d6d1
Patch G33 misuse of PROBE_MANUALLY
7 years ago
Scott Lahteine
69a7d4e0a5
Conditionals updates from #7979
7 years ago
Scott Lahteine
5fe15c7f10
Patch abuse of sprintf_P in G33
7 years ago
Rowan Meara
094bebcc2d
[1.1.x] Update Thermal Protection Documentation ( #8282 )
...
* Fix thermal protection documentation.
Even before the recent thermal protection changes, the documentation of
the thermal protection feature in the config files did not match the
implementation. I fixed the documentation and reconciled the M303
implementation with the documentation.
* Applied documentation changes to sample config files
* Renamed hysteresis to watch_temp_increase
* Added gcodes back into documentation.
7 years ago
Scott Lahteine
abb15bc30a
Followup patch for G92
7 years ago
Scott Lahteine
8e18e05d1d
Merge pull request #8309 from thinkyhead/bf1_fixes_for_117
...
[1.1] Fix G92 for native workspace
7 years ago
Scott Lahteine
aa80882bdf
Merge pull request #8306 from Kaibob2/patch-4
...
Length fix and translation
7 years ago
Scott Lahteine
e4466b55b5
Fix G92 for native workspace
7 years ago
Kai
b60efb4230
Length fix and translation
...
If #define MSG_Z_FADE_HEIGHT is xx.xx then the last character is crashing into the value
7 years ago
Thomas Moore
2f4a42b313
Fix Delta EEPROM
7 years ago
Scott Lahteine
e1ab285435
Fix some section sizes in EEPROM head comment
7 years ago
Scott Lahteine
26ebeadfaa
Eliminate some compiler warnings
7 years ago
Scott Lahteine
30e4b85587
Fix M118 parameters, with strict guideline
7 years ago
Scott Lahteine
44edffa0a9
Fix SLOW_PWM_HEATERS, issues already patched in 2.0.x
7 years ago
Scott Lahteine
ddf5d68815
Fix non-extended font option
7 years ago
Scott Lahteine
298863c2d0
Tweak an EEPROM loop
7 years ago
Rowan Meara
8e8787ad63
Fixed EEPROM CRC ( #8283 )
...
Fix EEPROM reversion.
7 years ago
Roxy-3D
12151e62ee
Fix G26's circle drawing... ( #8291 )
...
* Fix G26's circle drawing...
This mostly catches the bugfix-v1.1.x branch up to bugfix-v2.0.0
I'll have to do something similar to get bugfix-v2.0.0 caught up to
bugfix-v1.1.x
* only use planner.leveling_active if appropriate
7 years ago
Scott Lahteine
efc1029226
Update bilinear for native workspace
7 years ago
Scott Lahteine
1b09733e7c
Fix FWRETRACT un-hop
7 years ago
Scott Lahteine
d8ef9bda18
Fix point_t pointer in Nozzle::zigzag
7 years ago
Scott Lahteine
267c247da7
Cleanup Nozzle class, fix XY vs Z move order
7 years ago
Scott Lahteine
8ab368559a
Implement CNC_COORDINATE_SYSTEMS
7 years ago
Scott Lahteine
bb111b928b
Add CNC_COORDINATE_SYSTEMS to configs
7 years ago
Scott Lahteine
91abf07087
Cleanup and fix G33
7 years ago
Scott Lahteine
e642a64b68
Prettify some EEPROM code
7 years ago
Scott Lahteine
64f077fd2a
Remove I2CPEM workspace offset
7 years ago
Scott Lahteine
5fefa200ba
Tweaks to cubic_b_sline code style
7 years ago
Kris Kersey
46c2841904
Added support for Anet LCD on Ramps board.
...
Working pin map for Anet LCD display.
Pins 1 and 2 must be swapped on cable.
7 years ago
Scott Lahteine
f9f0ee0f21
Update G2/G3 Workspace Planes
7 years ago
Scott Lahteine
640526f0c8
Operate in Native Machine Space
7 years ago
Scott Lahteine
9af9596f69
Merge pull request #8241 from machaj/fix-links-to-probes
...
Fix probes configuration url
7 years ago
Jan Macháček
0c4e9980fb
Fix probes configuration url
7 years ago
AnHardt
13a3fb1acc
Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
...
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
7 years ago
Scott Lahteine
343dd1c0b8
Remove G33 trailing whitespace
7 years ago
Scott Lahteine
64029ef8a6
Merge pull request #8179 from thinkyhead/bf1_config_tweak
...
[1.1.x] Faster menu navigation for Anet A8
7 years ago
Scott Lahteine
524f4ee0cf
Tweak to M330 thermal protection
7 years ago
Scott Lahteine
34aeaec553
Remove ADKey steps acceleration
7 years ago
Luc Van Daele
0e4b6b373d
[1.1.x] G33 magic numbers ( #8173 )
...
* [1.1.x] G33 magic numbers
* oops
* comments
* oops
* warning
* better comment section
* remarks
* extra grids
7 years ago
Scott Lahteine
193a0e9273
pid_autotune parity with 2.0.x
7 years ago
Rowan Meara
39cc36d3f1
[1.1.x] M303 thermal runaway protection ( #8209 )
...
* Added M303 thermal runaway protection
Currently, thermal runaway protection is not available during M303.
Therefore, if someone plugs the thermistors in incorrectly and goes to
autotune their printer, the printer temperature could runaway and damage
could occur.
* Replace removed line, clarifying its logic
7 years ago
Scott Lahteine
87d3a1ae4d
Merge pull request #8228 from tcm0116/1.0.x-dual_stepper
...
[1.1.x] Fix automatic stepper assignment for X/Y/Z dual stepper drivers
7 years ago
AnHardt
dcd7949544
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
7 years ago
Thomas Moore
277eb16d67
Fix automatic stepper assignment for X/Y/Z dual stepper drivers
7 years ago
jmdearras
c9980c0a5c
Restore MKS_GEN_L
...
Removed by accident, I presume, when the file was cleaned up
7 years ago
jmdearras
3e9504d306
Fix case light "off" function ( #8205 )
...
* Fix case light "off" function
It would only turn the light off if brightness was 255
* Update Marlin_main.cpp
7 years ago
Scott Lahteine
4bf0e15653
Allow asterisks in G-Code commands
...
Addressing #6655
7 years ago
Scott Lahteine
f02ca2a9a3
Organize boards.h by architecture
7 years ago
Scott Lahteine
4fb3ce4739
Support for SilverGate Board
7 years ago
Scott Lahteine
704640bf98
Faster menu navigation for Anet A8
...
Addressing #8166
7 years ago
Scott Lahteine
db6de76acb
Only show custom bootscreen once
7 years ago
GMagician
15be1cb9a9
[1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour ( #8177 )
...
* [1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour
NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed
* Update Marlin_main.cpp
* Update Marlin_main.cpp
* Update Marlin_main.cpp
7 years ago
Scott Lahteine
893092ff7f
Kinematic clamp_to_software_endstops
7 years ago
Scott Lahteine
8b7c1e9cec
Fix for MAX_VFAT_ENTRIES sanity check
7 years ago
Scott Lahteine
393ceb28fc
The plural of 'axis' is 'axes'
7 years ago
Scott Lahteine
d9cb7be444
Merge pull request #8160 from thinkyhead/bf1_fixup_sd_reprint
...
[1.1.x] Simplify SD_REPRINT_LAST_SELECTED_FILE
7 years ago
Scott Lahteine
5837f067cf
Tweak to QUICK_HOME comment
7 years ago
Scott Lahteine
5e5a177934
No hacks needed for SD_REPRINT_LAST_SELECTED_FILE
7 years ago
Scott Lahteine
0b5b03d9dc
Tweak for soft endstops
7 years ago
Scott Lahteine
9288d80613
Merge pull request #8156 from thinkyhead/bf1_anet_10_servo
...
[1.1.x] Define a default SERVO0_PIN for Anet 1.0
7 years ago
Scott Lahteine
6698db29de
Update LCD draw condition
7 years ago
Scott Lahteine
25e86a520d
Merge pull request #8114 from thinkyhead/bf1_print_sd_file_again
...
[1.1.x] Cleanup for SD Print Again
7 years ago
Scott Lahteine
b0e282a74b
Cleanups for SD_REPRINT_LAST_SELECTED_FILE
7 years ago
Scott Lahteine
46ed54cd8e
Include time scale in some planner vars
7 years ago
Scott Lahteine
9c870baf84
Add a hidden 8s watchdog option for easier debugging
7 years ago
Scott Lahteine
471c2b5d5c
Provide a default SERVO0_PIN for Anet 1.0
7 years ago
Scott Lahteine
e792c2b234
Followup to #8123 - to match 2.0.x changes
7 years ago
Scott Lahteine
daa85f71e1
Merge pull request #8123 from thinkyhead/bf1_dual_xyz_endstops
...
[1.1.x] Dual endstops XYZ
7 years ago
Rowan Meara
9850ba0cbd
[1.1.x] Fix M303 thermal protection #8103 ( #8126 )
...
* Fixed M303 thermal protection
The temperature sanity checking logic was not being applied during M303
(pid autotuning) because instead of setting a target temperature, it
directly manipulated the pwm values. When PIDTEMP/PIDTEMPBED is
enabled, PWM values rather than the target temperature determine whether
the heater is on. I changed this to look directly at the PWM amount
when pid is enabled.
* Turn off heaters on M303 error
Currently, PID autotuning stops if it overshoots the temperature by 20C
or if if the temperature does not change for 20 minutes and it times
out. I added calls to disable the heaters in these scenarios.
* Removed unnecessary if statement.
Added changes suggested by GMagician.
* Update temperature.cpp
* Update temperature.cpp
* Update temperature.cpp
7 years ago
Scott Lahteine
318c419f77
Implement support for Dual X and Y endstops
7 years ago
Scott Lahteine
7e1232269a
Add Dual Steppers / Endstops to configs
7 years ago
Scott Lahteine
62d52d62dc
Cleanup for DIGIPOTS settings
7 years ago
LVD-AC
77cf42588f
(1.1.x) serious bug G33
7 years ago
Scott Lahteine
a979c428ee
Revert default BABYSTEP_MULTIPLICATOR to 1
7 years ago
jmdearras
6920769a9a
Added MKS GEN L board ( #8088 )
...
[1.1.x] Add MKS GEN L board
7 years ago
Scott Lahteine
410aa0716d
Concise SD_REPRINT_LAST_SELECTED_FILE description
7 years ago
Scott Lahteine
445a7f65cd
Clean up trailing whitespace
7 years ago
Luc Van Daele
e64cfb13b8
(1.1.x) auto tune calibration parameters ( #8031 )
...
* auto tune calibration parameters
* solve warnings
* Tweaks to formatting
* review Thinkyhead
* Error
7 years ago
Scott Lahteine
2296d98845
Tweak neopixel self-test
7 years ago
Scott Lahteine
9aac3d8773
Add some Polish translations
...
Thanks @SCiunczyk
7 years ago
Scott Lahteine
6569b9ba56
Fix FWRETRACT logic, apply common sense
7 years ago
Bob-the-Kuhn
7ab9abe4ef
Merge pull request #8107 from Bob-the-Kuhn/1.1.x-reduced-font-fix
...
(bug fix) 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages
7 years ago
Bob-the-Kuhn
3357170b18
give this language an unique name
7 years ago
Roxy-3D
2e746f2b8b
Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE ( #8104 )
...
* Initial conflict resolution
All previous items resolved:
- Use of ELAPSED() on timer code
- Switch to use of defer_return_to_status=true as much as possible
- Update & Clean Up of Max7219 routines
* Resolve non-SD case in ultralcd.cpp
7 years ago
Bob-the-Kuhn
594c075377
1.1.x - save 1400 bytes of FLASH by using reduced font for some languages ( #8095 )
...
* use reduced sized font for some languages
* Fit Portuguese language files to existing scheme
* Rename language_pl-DOGM.h to language_pl_utf8.h
* Rename language_pl_utf8.h to language_pl-DOGM.h
* Update dogm_font_data_ISO10646_1.h
* Update dogm_font_data_ISO10646_1.h
7 years ago
Scott Lahteine
8bb1e91afd
More specific M100 description
7 years ago
Scott Lahteine
a12d1b21b5
Merge pull request #8048 from madmo/mks-mini-gt2560
...
[1.1.x] Add MKS MINI 12864 support to GT2560
7 years ago
Scott Lahteine
5bed2f351a
Fix spacing, use single instances of similar pins
7 years ago
Scott Lahteine
ec9d7b639d
Encourage users to re-examine their configs
7 years ago
Scott Lahteine
1c97c1582c
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
7 years ago
Scott Lahteine
f06f4b40b8
Apply physical limits to mesh bounds
7 years ago