52073f21c5
Merge pull request #7556 from thinkyhead/bf1_slovak_language
...
Slovak UTF-8 translation
7 years ago
321f98f867
Fix servo delay in Folgertech config
7 years ago
3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
...
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
7 years ago
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
7 years ago
54d48130f3
Slovak UTF-8 translation
...
Slovak UTF-8 translation
7 years ago
11a724d8fc
Sanguinololu example configuration
7 years ago
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
7 years ago
4817b39d98
Added new feature for AutoParking Extruder (APE)
7 years ago
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
7 years ago
a1878cd1c0
Add "Level Corners" menu option
7 years ago
e9c72978c7
Implement SERVO_DELAY as array
...
This modify give SERVO_DELAY x servo basis
7 years ago
35d5a7bdff
Tweak CR-10 config/pins
7 years ago
25a11cd485
Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 ( #7480 )
7 years ago
97c21e9007
Support for Geeetech GT2560 Rev.A/Rev.A+
7 years ago
b370906031
Example config for Geeetech I3 Pro X with GT2560 controller
7 years ago
804818b4d9
Bring configs up to date
7 years ago
24af9e1bf4
Make audible user script feedback optional
...
Add a parameter to enable/disable audible user script feedback
7 years ago
936d00dda8
Implement probing delay for piezo sensors
7 years ago
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
7 years ago
51864fd365
Add bed size as a configuration option
7 years ago
dc7c95e07b
Remove `@ section fwretract`
7 years ago
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
7 years ago
a059e95463
Bring Infitary i3 config up to date
7 years ago
8a3bc6be4d
Improve FWRETRACT config options and commentary
...
Add more details as requested in #7198
7 years ago
4bc79ec877
Updates for G33-LCD interface
7 years ago
186580b55f
Arrange example configurations by vendor
7 years ago
6be369f3ea
Add some config names to AUTHOR
7 years ago
7fc31a7940
Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio
...
Add support for BQ heated bed kit with Hephestos 2
7 years ago
2065591daf
Add support for BQ heated bed kit with Hephestos 2
7 years ago
61be28133d
Support for Creality CR-10
...
Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)
7 years ago
f713f25fa5
Clean up excess whitespace
7 years ago
fc9ce65095
Add `BUSY_WHILE_HEATING` for hosts that need it
7 years ago
cca1cca3a5
Merge pull request #7237 from thinkyhead/bf_cz_mapper
...
UTF-8 mapper for Czech
7 years ago
a2babb532d
Merge pull request #7217 from benlye/add-kill-action
...
Add configurable action command to send when printer is killed
7 years ago
8c34233452
UTF-8 mapper for Czech
7 years ago
c28749a567
Add kill action
...
Sends pre-defined string as action command when printer is kill.
7 years ago
567941e341
Fix for issues #6997 and #7152
...
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
7 years ago
69297b2d7b
Make all EEPROM optimization options available
7 years ago
232a10410d
LCD_FOR_MELZI
7 years ago
dcec7178d1
Expose DISABLE_M503 option as a test option
7 years ago
1ff7d10c80
Add configuration for Infitary M508 (i3 clone)
...
Based on Infitary's own firmware settings.
7 years ago
406ef69702
Move Anet A8 config to subfolder
7 years ago
379926961c
Add Anet A6 config, edit Anet A8 config
7 years ago
5b03f23fa2
Bring configurations up to date, fix some comments
7 years ago
f4246dc8ff
Merge pull request #7165 from thinkyhead/bf_parser_shorthand
...
Use parser.seenval, add shorthand functions
7 years ago
941943c167
Apply const, spacing, etc.
7 years ago
5b11b33854
Add support for Průša MK2 Multiplexer
7 years ago
a4a587a897
Fix spelling of Průša
7 years ago
9651d01e1a
Add Skynet/ANET A10 support
7 years ago
eb314373bb
Config spacing & consistency, group custom LCDs
7 years ago
Scott Lahteine