You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
37 lines
1.0 KiB
37 lines
1.0 KiB
# Through Hole Component Removal HOWTO
|
|
|
|
## Items needed
|
|
|
|
* PCB with component(s) to be removed
|
|
* PCB cradle
|
|
* No clean flux
|
|
* 2 cotton swabs
|
|
* Soldering Iron
|
|
* De-solder wire
|
|
* Solder vacuum
|
|
* Tweezers
|
|
* Flux remover
|
|
|
|
## Procedure
|
|
|
|
1. Secure the PCB into the cradle.
|
|
|
|
1. Swab the area with no clean flux.
|
|
|
|
1. Heat the soldering iron up to the melting temperature of the solder on the board. For lead-free solder, this around 420 C.
|
|
|
|
1. Using a soldering iron, melt some de-solder wire onto the leads to be soldered.
|
|
|
|
1. Press the soldering iron against the lead. The de-solder and solder should melt into a bubble.
|
|
|
|
1. Use a solder vacuum immediately after removing the soldering iron away from the lead.
|
|
|
|
1. Repeat 4-5 until enough solder has been removed so that the lead can freely move. If this is not the case, add step 3 as well.
|
|
|
|
1. Repeat 4-5 for every lead.
|
|
|
|
1. The component should be able to be removed with tweezers. Turn off the soldering iron.
|
|
|
|
1. Use a cotton swab and flux remover to clean the area.
|
|
|