qmk_firmware/LUFA/ManPages/FutureChanges.txt

/** \file
 *
 *  This file contains special DoxyGen information for the generation of the main page and other special
 *  documentation pages. It is not a project source file.
 */

 /** \page Page_FutureChanges Future Changes
  *
  *  Below is a list of future changes which are proposed for the LUFA library, but not yet started/complete.
  *  This gives an unordered list of future changes which may be available in future releases of the library.
  *  If you have an item to add to this list, please contact the library author via email, the LUFA mailing list,
  *  or post your suggestion as an enhancement request to the project bug tracker.
  *
  *  <b>Targeted for Future Releases:</b>
  *  - Code Features
  *      -# Add hub support when in Host mode for multiple devices
  *      -# Investigate virtual hubs when in device mode instead of composite devices
  *      -# Add ability to get number of bytes not written with pipe/endpoint write routines after an error
  *      -# Change makefiles to allow for absolute LUFA location to be used
  *      -# Re-add interrupt Pipe/Endpoint support
  *      -# Add HID report macros to make HID report editing easier
  *      -# Investigate dynamically created device descriptors
  *      -# Add new event for EVENT_USB_Device_ControlRequest() fired before the internal library request handlers
  *  - Documentation/Support
  *      -# Add detailed overviews of how each demo works
  *      -# Add board overviews
  *      -# Write LUFA tutorials
  *  - Demos/Projects
  *      -# Multiple-Report HID device
  *      -# Device/Host USB bridge
  *      -# Alternative (USB-IF endorsed) USB-CDC Ethernet Class
  *      -# Finish Test and Measurement Class demo
  *      -# Finish BluetoothHost demo
  *      -# Finish SideShow demo
  *      -# Finish StandaloneProgrammer project
  *      -# Arduino Uno compatible USB-MIDI, USB-HID
  *      -# Make Webserver project work in RNDIS device mode
  *  - Ports
  *      -# AVR32 UC3B series microcontrollers
  *      -# Atmel ARM7 series microcontrollers
  *      -# Other (commercial) C compilers
  */
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 15 years ago			`/** \file`
			`*`
			`* This file contains special DoxyGen information for the generation of the main page and other special`
			`* documentation pages. It is not a project source file.`
			`*/`

			`/** \page Page_FutureChanges Future Changes`
			`*`
			`* Below is a list of future changes which are proposed for the LUFA library, but not yet started/complete.`
Added default test tone generation mode to the Device mode AudioInput demos. 14 years ago			`* This gives an unordered list of future changes which may be available in future releases of the library.`
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 15 years ago			`* If you have an item to add to this list, please contact the library author via email, the LUFA mailing list,`
			`* or post your suggestion as an enhancement request to the project bug tracker.`
			`*`
			`* <b>Targeted for Future Releases:</b>`
			`* - Code Features`
			`* -# Add hub support when in Host mode for multiple devices`
Ensure device address latch bit is not set at the same time as the new address, as per datasheet. Minor documentation fixes. Fix broken USB host mode due to the USB frame counter not being updated during the early enumeration steps, causing USB_Host_DelayMS() to spinloop forever. 14 years ago			`* -# Investigate virtual hubs when in device mode instead of composite devices`
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 15 years ago			`* -# Add ability to get number of bytes not written with pipe/endpoint write routines after an error`
Change over Doxygen \note documentation to \pre where applicable. 15 years ago			`* -# Change makefiles to allow for absolute LUFA location to be used`
Add better description of the Ultra-Lightweight Ring Buffer header files. 14 years ago			`* -# Re-add interrupt Pipe/Endpoint support`
Make Host mode Class drivers only set the class driver instance's state values once a compatible interface has been found within the device. 14 years ago			`* -# Add HID report macros to make HID report editing easier`
Added default test tone generation mode to the Device mode AudioInput demos. 14 years ago			`* -# Investigate dynamically created device descriptors`
			`* -# Add new event for EVENT_USB_Device_ControlRequest() fired before the internal library request handlers`
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 15 years ago			`* - Documentation/Support`
			`* -# Add detailed overviews of how each demo works`
			`* -# Add board overviews`
			`* -# Write LUFA tutorials`
			`* - Demos/Projects`
			`* -# Multiple-Report HID device`
			`* -# Device/Host USB bridge`
			`* -# Alternative (USB-IF endorsed) USB-CDC Ethernet Class`
Rename reserved members of all structs so that they are uniformly named across all demos/projects/bootloaders. Added start of the Incomplete TMC demo's command parser code. 14 years ago			`* -# Finish Test and Measurement Class demo`
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 15 years ago			`* -# Finish BluetoothHost demo`
			`* -# Finish SideShow demo`
			`* -# Finish StandaloneProgrammer project`
Move out many of the common class driver constants into grouped enums, to make them more managable. Add new CDC descriptor structs to the CDC class driver, so that the CDC demos can use human readable field names. Rename prefix for Still Image Host class driver functions from "SImage_" to "SI_" to remain consistent with the rest of the driver. 14 years ago			`* -# Arduino Uno compatible USB-MIDI, USB-HID`
Minor documentation enhancements. 14 years ago			`* -# Make Webserver project work in RNDIS device mode`
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 15 years ago			`* - Ports`
			`* -# AVR32 UC3B series microcontrollers`
			`* -# Atmel ARM7 series microcontrollers`
			`* -# Other (commercial) C compilers`
			`*/`
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda 14 years ago