qmk_firmware/LUFA/ManPages/FutureChanges.txt

/** \file
 *
 *  This file contains special DoxyGen information for the generation of the main page and other special
 *  documentation pages. It is not a project source file.
 */

 /** \page Page_FutureChanges Future Changes
  *
  *  Below is a list of future changes which are proposed for the LUFA library, but not yet started/complete.
  *  This gives an unordered list of future changes which may be available in future releases of the library.
  *  If you have an item to add to this list, please contact the library author via email, the LUFA mailing list,
  *  or post your suggestion as an enhancement request to the project bug tracker.
  *
  *  <b>Targeted for Future Releases:</b>
  *  - Code Features
  *      -# Add hub support when in Host mode for multiple devices
  *      -# Investigate virtual hubs when in device mode instead of composite devices
  *      -# Change makefiles to allow for absolute LUFA location to be used
  *      -# Re-add interrupt Pipe/Endpoint support
  *      -# Add makefile includes to reduce boilerplate in user makefiles
  *      -# Update stream APIs to use DMA transfers on supported architectures
  *      -# Pull out third party libraries into a separate folder and reference them as required
  *      -# Add a LUFA_YIELD macro for integration into a third-party RTOS
  *      -# Abstract out Mass Storage byte send/receive to prevent low level API use in projects
  *      -# Consider switch from endpoint numbers to full endpoint addresses to ease future architecture expansion
  *      -# Fix HID report parser usage support for array types
  *      -# Add additional standard request helper functions to host mode
  *      -# Add Dataflash_SendCommand()
  *      -# Make HOST_DEVICE_SETTLE_DELAY_MS a global variable that can be changed
  *  - Documentation/Support
  *      -# Add detailed overviews of how each demo works
  *      -# Add board overviews
  *      -# Write LUFA tutorials
  *  - Demos/Projects
  *      -# Device/Host USB bridge
  *      -# Finish incomplete demos and projects
  *      -# Add class driver support for Test and Measurement class
  *      -# Add class driver support for EEM class
  *      -# Add class driver support for ECM class
  *  - Ports
  *      -# Complete AVR32 port for existing devices, add UC3C support
  *      -# Atmel ARM7 series microcontrollers
  *      -# Other (commercial) C compilers
  */
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 15 years ago			`/** \file`
			`*`
			`* This file contains special DoxyGen information for the generation of the main page and other special`
			`* documentation pages. It is not a project source file.`
			`*/`

			`/** \page Page_FutureChanges Future Changes`
			`*`
			`* Below is a list of future changes which are proposed for the LUFA library, but not yet started/complete.`
Added default test tone generation mode to the Device mode AudioInput demos. 14 years ago			`* This gives an unordered list of future changes which may be available in future releases of the library.`
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 15 years ago			`* If you have an item to add to this list, please contact the library author via email, the LUFA mailing list,`
			`* or post your suggestion as an enhancement request to the project bug tracker.`
			`*`
			`* <b>Targeted for Future Releases:</b>`
			`* - Code Features`
			`* -# Add hub support when in Host mode for multiple devices`
Ensure device address latch bit is not set at the same time as the new address, as per datasheet. Minor documentation fixes. Fix broken USB host mode due to the USB frame counter not being updated during the early enumeration steps, causing USB_Host_DelayMS() to spinloop forever. 14 years ago			`* -# Investigate virtual hubs when in device mode instead of composite devices`
Change over Doxygen \note documentation to \pre where applicable. 15 years ago			`* -# Change makefiles to allow for absolute LUFA location to be used`
Add better description of the Ultra-Lightweight Ring Buffer header files. 14 years ago			`* -# Re-add interrupt Pipe/Endpoint support`
Fix typos in the HID class bootloader makefile. 14 years ago			`* -# Add makefile includes to reduce boilerplate in user makefiles`
Fix reversed descriptions for the AVR8 USB pad regulator enable/disable masks (thanks to Omar). 14 years ago			`* -# Update stream APIs to use DMA transfers on supported architectures`
Spell check library source code files. 14 years ago			`* -# Pull out third party libraries into a separate folder and reference them as required`
Fixed possible invalid program execution when in host mode if corrupt descriptor lengths are supplied by the attached device. Minor code cleanups to add const and reformat where missing, as well as abstract out the internal device signature start address into a macro, so that it can be altered to suit particular devices within a single architecture if needed. Add missing documentation to the USB_Device_States_t enum. 14 years ago			`* -# Add a LUFA_YIELD macro for integration into a third-party RTOS`
Update Webserver project to remove DHCP IP configuration status notification. 14 years ago			`* -# Abstract out Mass Storage byte send/receive to prevent low level API use in projects`
Fix compile errors when both Host and Device modes are enabled. 14 years ago			`* -# Consider switch from endpoint numbers to full endpoint addresses to ease future architecture expansion`
Fix logic bug in the incomplete Android Accessory Host demo preventing correct detection of an attached Android Accessory Mode device. 14 years ago			`* -# Fix HID report parser usage support for array types`
Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration instead of manual host state machine manipulations in the main application task. Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device. Renamed global state variables that are specific to a certain USB mode to clearly indicate which mode the variable relates to, by changing the USB_* prefix to USB_Device_* or USB_Host_*. Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required. Altered the USB_Host_SetDeviceConfiguration() function to update the new USB_Host_ConfigurationNumber global as required. Moved out the Host mode standard request convenience/helper functions from the architecture specific Host driver files to the architecture agnostic HostStandardReq.c driver file. 14 years ago			`* -# Add additional standard request helper functions to host mode`
Update LUFAConfig.h with missing options for the AVR32 target. Add Binary Page Mode fuse command bytes to the AT45DB642D.h Dataflash header. 13 years ago			`* -# Add Dataflash_SendCommand()`
Remove redundant prototype for Audio_Host_StartStopStreaming() and Audio_Host_GetSetEndpointProperty(). Update host mode Audio class inline functions to prevent unused parameter warnings. 13 years ago			`* -# Make HOST_DEVICE_SETTLE_DELAY_MS a global variable that can be changed`
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 15 years ago			`* - Documentation/Support`
			`* -# Add detailed overviews of how each demo works`
			`* -# Add board overviews`
			`* -# Write LUFA tutorials`
			`* - Demos/Projects`
			`* -# Device/Host USB bridge`
Added new incomplete AudioInputHost Host LowLevel demo. Added missing Audio class control request definitions. Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host. 14 years ago			`* -# Finish incomplete demos and projects`
			`* -# Add class driver support for Test and Measurement class`
Added new callback to the Audio Class driver to allow for endpoint control manipulations such as data sample rates. Modified the Class Driver AudioInput and AudioOutput demos to support multiple sample rates. Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed. Fix broken LowLevel audio demo descriptors. Minor documentation fixes. 14 years ago			`* -# Add class driver support for EEM class`
			`* -# Add class driver support for ECM class`
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 15 years ago			`* - Ports`
Fixed incorrect signature in the CDC and DFU class bootloaders for the ATMEGA8U2. Minor documentation cleanups. Modify the incomplete AudioInputHost demo for mono audio output. 14 years ago			`* -# Complete AVR32 port for existing devices, add UC3C support`
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. 15 years ago			`* -# Atmel ARM7 series microcontrollers`
			`* -# Other (commercial) C compilers`
			`*/`
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda 14 years ago