Add power control of keyswitch board and tweak scan wait

keyboard/hhkb/Makefile.tmk

@@ -71,7 +71,7 @@ MCU = atmega32u4
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
-F_CPU = 8000000
+F_CPU = 16000000
 
 
 #
@@ -109,7 +109,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control
 CONSOLE_ENABLE = yes	# Console for debug

keyboard/hhkb/doc/Power.txt

@@ -0,0 +1,48 @@
+HHKB Power consumption
+----------------------
+
+**Power consumption
+    board   clock/prescaler     keyswitch   power ctrl      current
+    --------------------------------------------------------------------------
+    tmk     16MHz               no          no              26.4mA
+    tmk     16MHz               pro1        no              45.1mA
+    tmk     16MHz/2             no          no              18.1mA
+    tmk     16MHz/2             pro1        no              37.3mA
+    tmk     8MHz                no          no              18.9mA
+    tmk     8MHz                pro2        no(w/o FET)     32.1mA
+    tmk     8MHz                pro2        no(w FET)       32.1mA withou POWER_ON/FF
+    tmk     8MHz                pro2        no(w FET)       32.6mA with POWR_ON/OFF
+    tmk     8MHz                pro2        15ms(w FET)     21.3mA with POWR_ON/OFF, enumerated but error -32
+    tmk     8MHz                pro2        60ms(w FET)     13.3mA with POWR_ON/OFF, not enumerated
+
+    gh60    16MHz                                           25.8mA
+    gh60    16MHz               USB suspend w LED breathing 17.6-29.1mA
+    gh60    16MHz               USB suspend w/o LED         0.2mA(0.231-0.276mA)
+    Poker                                                    5.6mA
+    Poker                       USB suspend                  0.3mA(0.301mA)
+    gh60    16MHz               stock firmware by komar     26.8mA
+
+
+    HHKB pro2 Over All                                     139.4mA
+    HHKB pro2 Controller                                   115.1mA
+    HHKB pro1 Controller                                    25.9mA
+
+
+keyswitch power consumption:
+pro1: 45.1-26.4=18.7mA
+      37.3-18.1=19.2mA
+pro2: 32.1-18.9=13.2mA
+
+
+
+
+
+**Low Freq Crystal or Prescaler?
+No advantage of Low Freq Crystal against Prescaled.
+
+Clock routing
+X'tal --+---->Prescaler-------> System Clock
+        |
+        +---------------------> USB PLL
+
+Design Decision: Install 16MHz crystal on board with using clock rescaler.

keyboard/hhkb/matrix.c

@@ -63,7 +63,7 @@ static matrix_row_t _matrix1[MATRIX_ROWS];
     PORTE |= (1<<6);                    \
 } while (0)
 #define KEY_SELECT(ROW, COL)    (PORTB = (PORTB & 0xC0) |       \
-                                         (((COL) & 0x07)<<3) |    \
+                                         (((COL) & 0x07)<<3) |  \
                                          ((ROW) & 0x07))
 #define KEY_ENABLE()            (PORTB &= ~(1<<6))
 #define KEY_UNABLE()            (PORTB |=  (1<<6))
@@ -79,16 +79,20 @@ static matrix_row_t _matrix1[MATRIX_ROWS];
 // col:     PB3-5,6
 // key:     PD7(pull-uped)
 // prev:    PB7
+// power:   PD4(L:off/H:on)
 #define KEY_INIT()              do {    \
     DDRB  = 0xFF;                       \
     PORTB = 0x00;                       \
     DDRD  &= ~0x80;                     \
     PORTD |= 0x80;                      \
+    /* keyswitch board power on */      \
+    DDRD  |=  (1<<4);                   \
+    PORTD |=  (1<<4);                   \
     KEY_UNABLE();                       \
     KEY_PREV_OFF();                     \
 } while (0)
 #define KEY_SELECT(ROW, COL)    (PORTB = (PORTB & 0xC0) |       \
-                                         (((COL) & 0x07)<<3) |    \
+                                         (((COL) & 0x07)<<3) |  \
                                          ((ROW) & 0x07))
 #define KEY_ENABLE()            (PORTB &= ~(1<<6))
 #define KEY_UNABLE()            (PORTB |=  (1<<6))
@@ -97,6 +101,20 @@ static matrix_row_t _matrix1[MATRIX_ROWS];
 #define KEY_PREV_OFF()          (PORTB &= ~(1<<7))
 #define KEY_POWER_ON()
 #define KEY_POWER_OFF()
+/*
+#define KEY_POWER_ON()          do {    \
+    KEY_INIT();                         \
+    PORTD |=  (1<<4);                   \
+    _delay_ms(1);                       \
+} while (0)
+#define KEY_POWER_OFF()         do {    \
+    PORTD &= ~(1<<4);                   \
+    DDRB  &= ~0xFF;                     \
+    PORTB &= ~0xFF;                     \
+    DDRB  &= ~0x80;                     \
+    PORTB &= ~0x80;                     \
+} while (0)
+*/
 
 
 #elif defined(__AVR_ATmega328P__)
@@ -195,16 +213,21 @@ uint8_t matrix_scan(void)
             uint8_t last = TIMER_RAW;
 
             KEY_ENABLE();
+
             // Wait for KEY_STATE outputs its value.
             // 1us was ok on one HHKB, but not worked on another.
             // no   wait doesn't work on Teensy++ with pro(1us works)
             // no   wait does    work on tmk PCB(8MHz) with pro2
             // 1us  wait does    work on both of above
+            // 1us  wait doesn't work on tmk(16MHz)
+            // 5us  wait does    work on tmk(16MHz)
+            // 5us  wait does    work on tmk(16MHz/2)
+            // 5us  wait does    work on tmk(8MHz)
             // 10us wait does    work on Teensy++ with pro
             // 10us wait does    work on 328p+iwrap with pro
             // 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan)
-            _delay_us(1);
-//            _delay_us(10);
+            _delay_us(5);
+
             if (KEY_STATE()) {
                 matrix[row] &= ~(1<<col);
             } else {