forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Clueboard 66% Hotswap Support (#5204)

Browse Source 
* Initial Clueboard 66% arm support

* Fix LAYOUT_66_ansi

* wip

* Bring this branch up to date with led_matrix

* Get Clueboard 66% hotswap working with led_matrix

* stm32 cleanup

* Fix compiling for clueboard 66% hotswap prototype

* Reduce the size of the prototype firmware
pull/5232/head
skullydazed 6 years ago committed by MechMerlin
parent 539a6fc825
commit 0f62383be5
17 changed files with 2099 additions and 143 deletions
Show Stats Download Patch File Download Diff File

4
keyboards/clueboard/66_hotswap/66_hotswap.h
Unescape View File

@ -3,3 +3,7 @@
#ifdef KEYBOARD_clueboard_66_hotswap_gen1 #ifdef KEYBOARD_clueboard_66_hotswap_gen1
#include "gen1.h" #include "gen1.h"
#endif #endif
#ifdef KEYBOARD_clueboard_66_hotswap_prototype
#include "prototype.h"
#endif

1
keyboards/clueboard/66_hotswap/config.h
Unescape View File

@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
#pragma once #pragma once
#include "config_common.h" #include "config_common.h"
/* USB Device descriptor parameter */ /* USB Device descriptor parameter */

520
keyboards/clueboard/66_hotswap/gen1/chconf.h
Unescape View File

@ -0,0 +1,520 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
#ifndef CHCONF_H
#define CHCONF_H
#define _CHIBIOS_RT_CONF_
/*===========================================================================*/
/**
* @name System timers settings
* @{
*/
/*===========================================================================*/
/**
* @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
#define CH_CFG_ST_RESOLUTION 32
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
#define CH_CFG_ST_FREQUENCY 100000
/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
* of ticks that is safe to specify in a timeout directive.
* The value one is not valid, timeouts are rounded up to
* this value.
*/
#define CH_CFG_ST_TIMEDELTA 2
/** @} */
/*===========================================================================*/
/**
* @name Kernel parameters and options
* @{
*/
/*===========================================================================*/
/**
* @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
* @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
#define CH_CFG_TIME_QUANTUM 0
/**
* @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through
* the simplified core memory allocator.
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
#define CH_CFG_MEMCORE_SIZE 0
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an
* infinite loop.
*/
#define CH_CFG_NO_IDLE_THREAD FALSE
/** @} */
/*===========================================================================*/
/**
* @name Performance options
* @{
*/
/*===========================================================================*/
/**
* @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist.
*
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
#define CH_CFG_OPTIMIZE_SPEED TRUE
/** @} */
/*===========================================================================*/
/**
* @name Subsystem options
* @{
*/
/*===========================================================================*/
/**
* @brief Time Measurement APIs.
* @details If enabled then the time measurement APIs are included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_TM TRUE
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_REGISTRY TRUE
/**
* @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_WAITEXIT TRUE
/**
* @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_SEMAPHORES TRUE
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
/**
* @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MUTEXES TRUE
/**
* @brief Enables recursive behavior on mutexes.
* @note Recursive mutexes are heavier and have an increased
* memory footprint.
*
* @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
/**
* @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#define CH_CFG_USE_CONDVARS TRUE
/**
* @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
/**
* @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_EVENTS TRUE
/**
* @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification
* are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
/**
* @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MESSAGES TRUE
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#define CH_CFG_USE_MESSAGES_PRIORITY TRUE
/**
* @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#define CH_CFG_USE_MAILBOXES TRUE
/**
* @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MEMCORE TRUE
/**
* @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
* @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
#define CH_CFG_USE_HEAP TRUE
/**
* @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#define CH_CFG_USE_MEMPOOLS TRUE
/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
#define CH_CFG_USE_DYNAMIC TRUE
/** @} */
/*===========================================================================*/
/**
* @name Debug options
* @{
*/
/*===========================================================================*/
/**
* @brief Debug option, kernel statistics.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_STATISTICS FALSE
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
/**
* @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input
* parameters are activated.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_ENABLE_CHECKS FALSE
/**
* @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_ENABLE_ASSERTS FALSE
/**
* @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
#define CH_DBG_TRACE_BUFFER_SIZE 128
/**
* @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed.
*
* @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
#define CH_DBG_ENABLE_STACK_CHECK TRUE
/**
* @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the
* runtime measurement of the used stack.
*
* @note The default is @p FALSE.
*/
#define CH_DBG_FILL_THREADS FALSE
/**
* @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
* @note The default is @p FALSE.
* @note This debug option is not currently compatible with the
* tickless mode.
*/
#define CH_DBG_THREADS_PROFILING FALSE
/** @} */
/*===========================================================================*/
/**
* @name Kernel hooks
* @{
*/
/*===========================================================================*/
/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
#define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/
/**
* @brief Threads initialization hook.
* @details User initialization code added to the @p chThdInit() API.
*
* @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
}
/**
* @brief ISR enter hook.
*/
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
/* IRQ prologue code here.*/ \
}
/**
* @brief ISR exit hook.
*/
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
/* IRQ epilogue code here.*/ \
}
/**
* @brief Idle thread enter hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
/* Idle-enter code here.*/ \
}
/**
* @brief Idle thread leave hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
/* Idle-leave code here.*/ \
}
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
#define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
#define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \
}
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
/**
* @brief Trace hook.
* @details This hook is invoked each time a new record is written in the
* trace buffer.
*/
#define CH_CFG_TRACE_HOOK(tep) { \
/* Trace code here.*/ \
}
/** @} */
/*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
#endif /* CHCONF_H */
/** @} */

158
keyboards/clueboard/66_hotswap/gen1/config.h
Unescape View File

@ -1,44 +1,146 @@
#pragma once /*
* Copyright 2017 skully <skullydazed@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h" #include "config_common.h"
#define PRODUCT_ID 0x2390 /* USB Device descriptor parameter */
#define VENDOR_ID 0xC1ED
#define PRODUCT_ID 0x2391
#define DEVICE_VER 0x0001 #define DEVICE_VER 0x0001
#define MANUFACTURER Clueboard
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here:
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
/* key matrix size */ /* key matrix size */
#define MATRIX_ROWS 10 #define MATRIX_ROWS 10
#define MATRIX_COLS 8 #define MATRIX_COLS 8
/* ROWS: Top to bottom, COLS: Left to right /*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/ */
#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } #define MATRIX_ROW_PINS { B11, A6, A3, A2, A1, B5, B6, C15, C14, C13 }
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 } #define MATRIX_COL_PINS { B10, B2, B1, B0, A7, B4, B3, B7 }
#define UNUSED_PINS #define UNUSED_PINS { A0, A8, A15, B12, B13, B14, B15 }
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 6
/* Speaker configuration /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/ */
#define B7_AUDIO //#define FORCE_NKRO
#define NO_MUSIC_MODE
#define AUDIO_CLICKY /* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* Backlight configuration /*
* Feature disable options
* These options are also useful to firmware size reduction.
*/ */
#define BACKLIGHT_LEVELS 1
/* Underlight configuration /* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/ */
#define RGB_DI_PIN D7
#define RGBLED_NUM 26 // Number of LEDs /* Prevent use of disabled MIDI features in the keymap */
#define RGBLIGHT_HUE_STEP 32 //#define MIDI_ENABLE_STRICT 1
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17 /* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
#define RGBLIGHT_ANIMATIONS */
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1 //#define MIDI_BASIC
#define RGBLIGHT_EFFECT_BREATHE_MAX 200
#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2 /* enable advanced MIDI features:
#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1 - MIDI notes can be added to the keymap
#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 4 // How many LEDs wide to light up - Octave shift and transpose
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 16 // The led to start at - Virtual sustain, portamento, and modulation wheel
#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 8 // How many LEDs to travel - etc.
#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // How many LEDs wide to light up */
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
/* Backlight configuration
*/
#define BACKLIGHT_LEVELS 10
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 0b1110100 AD <-> GND
// 0b1110111 AD <-> VCC
// 0b1110101 AD <-> SCL
// 0b1110110 AD <-> SDA
#define LED_DRIVER_ADDR_1 0b1110100
#define I2C1_BANK GPIOB
#define I2C1_SCL 8
#define I2C1_SDA 9
#define LED_DRIVER_COUNT 1
#define LED_DRIVER_LED_COUNT 71

227
keyboards/clueboard/66_hotswap/gen1/gen1.c
Unescape View File

@ -1,63 +1,186 @@
/* Copyright 2017 Clueboard <info@clueboard.co>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "gen1.h" #include "gen1.h"
#include <avr/io.h> #include "is31fl3731-simple.h"
#include "backlight.h"
#include "print.h"
void matrix_init_kb(void) { void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
led_init_ports();
// JTAG disable for PORT F. write JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
} }
void matrix_scan_kb(void) { void matrix_scan_kb(void) {
matrix_scan_user();
} }
void backlight_init_ports(void) { #ifdef LED_MATRIX_ENABLE
print("init_backlight_pin()\n"); const is31_led g_is31_leds[LED_DRIVER_LED_COUNT] = {
// Set our LED pins as output /* Refer to IS31 manual for these locations
DDRD |= (1<<0); // Esc * driver
DDRD |= (1<<4); // Page Up * | LED address
DDRD |= (1<<1); // Arrows * | | */
{0, C1_1}, // k00 KC_GESC
// Set our LED pins low {0, C1_2}, // k01 KC_1
PORTD &= ~(1<<0); // Esc {0, C1_3}, // k02 KC_2
PORTD &= ~(1<<4); // Page Up {0, C1_4}, // k03 KC_3
PORTD &= ~(1<<1); // Arrows {0, C1_5}, // k04 KC_4
} {0, C1_6}, // k05 KC_5
{0, C1_7}, // k06 KC_6
{0, C1_8}, // k07 KC_7
{0, C1_9}, // k50 KC_8
{0, C1_10}, // k51 KC_9
{0, C1_11}, // k52 KC_0
{0, C1_12}, // k53 KC_MINS
{0, C1_13}, // k54 KC_EQL
{0, C1_14}, // k55 KC_BSPC
{0, C1_15}, // k57 KC_PGUP
{0, C2_1}, // k10 KC_TAB
{0, C2_2}, // k11 KC_Q
{0, C2_3}, // k12 KC_W
{0, C2_4}, // k13 KC_E
{0, C2_5}, // k14 KC_R
{0, C2_6}, // k15 KC_T
{0, C2_7}, // k16 KC_Y
{0, C2_8}, // k17 KC_U
{0, C2_9}, // k60 KC_I
{0, C2_10}, // k61 KC_O
{0, C2_11}, // k62 KC_P
{0, C2_12}, // k63 KC_LBRC
{0, C2_13}, // k64 KC_RBRC
{0, C2_14}, // k65 KC_BSLS
{0, C2_15}, // k67 KC_PGDN
{0, C3_1}, // k20 KC_CAPS
{0, C3_2}, // k21 KC_A
{0, C3_3}, // k22 KC_S
{0, C3_4}, // k23 KC_D
{0, C3_5}, // k24 KC_F
{0, C3_6}, // k25 KC_G
{0, C3_7}, // k26 KC_H
{0, C3_8}, // k27 KC_J
{0, C3_9}, // k70 KC_K
{0, C3_10}, // k71 KC_L
{0, C3_11}, // k72 KC_SCLN
{0, C3_12}, // k73 KC_QUOT
{0, C3_14}, // k75 KC_ENT
{0, C4_1}, // k30 KC_LSFT
{0, C4_3}, // k32 KC_Z
{0, C4_4}, // k33 KC_X
{0, C4_5}, // k34 KC_C
{0, C4_6}, // k35 KC_V
{0, C4_7}, // k36 KC_B
{0, C4_8}, // k37 KC_N
{0, C4_9}, // k80 KC_M
{0, C4_10}, // k81 KC_COMM
{0, C4_11}, // k82 KC_DOT
{0, C4_12}, // k83 KC_SLSH
{0, C4_13}, // k85 KC_RSFT
{0, C4_14}, // k86 KC_UP
{0, C5_1}, // k40 KC_LCTL
{0, C5_2}, // k41 KC_LGUI
{0, C5_3}, // k42 KC_LALT
{0, C5_4}, // Unassociated between LALT and SPACE_2.75
{0, C5_5}, // k45 KC_SPC SPACE_2.75
{0, C5_6}, // k45 KC_SPC SPACE_6.75
{0, C5_7}, // k46 KC_SPC SPACE_2.25
{0, C5_8}, // Unassociated between SPACE_2.25 and SPACE_1.25
{0, C5_9}, // k90 KC_RGUI
{0, C5_10}, // k92 KC_RALT
{0, C5_11}, // k93 MO(_FL)
{0, C5_12}, // k94 KC_RCTL
{0, C5_13}, // k95 KC_LEFT
{0, C5_14}, // k96 KC_DOWN
{0, C5_15} // k97 KC_RGHT
};
void backlight_set(uint8_t level) { const led_matrix g_leds[LED_DRIVER_LED_COUNT] = {
if ( level == 0 ) {
// Turn off light
PORTD |= (1<<0); // Esc
PORTD |= (1<<4); // Page Up
PORTD |= (1<<1); // Arrows
} else {
// Turn on light
PORTD &= ~(1<<0); // Esc
PORTD &= ~(1<<4); // Page Up
PORTD &= ~(1<<1); // Arrows
}
}
void led_init_ports() { /*{row | col << 4}
// * Set our LED pins as output | LED_ROW_COL(row, col)
DDRB |= (1<<4); | | modifier
} | | | */
{{0|(1<<4)}, {0, 0}, 1}, // k00 KC_GESC
{{0|(2<<4)}, {14.45, 0}, 0}, // k01 KC_1
{{0|(3<<4)}, {28.9, 0}, 0}, // k02 KC_2
{{0|(4<<4)}, {43.35, 0}, 0}, // k03 KC_3
{{0|(5<<4)}, {57.8, 0}, 0}, // k04 KC_4
{{0|(6<<4)}, {72.25, 0}, 0}, // k05 KC_5
{{0|(7<<4)}, {86.7, 0}, 0}, // k06 KC_6
{{0|(8<<4)}, {101.2, 0}, 0}, // k07 KC_7
{{0|(9<<4)}, {115.6, 0}, 0}, // k50 KC_8
{{0|(10<<4)}, {130, 0}, 0}, // k51 KC_9
{{0|(11<<4)}, {144.5, 0}, 0}, // k52 KC_0
{{0|(12<<4)}, {159, 0}, 0}, // k53 KC_MINS
{{0|(13<<4)}, {173.4, 0}, 0}, // k54 KC_EQL
{{0|(14<<4)}, {195.1, 0}, 1}, // k55 KC_BSPC
{{0|(15<<4)}, {224, 0}, 1}, // k57 KC_PGUP
void led_set_kb(uint8_t usb_led) { {{1|(0<<4)}, {3.6125, 16}, 1}, // k10 KC_TAB
DDRB |= (1<<4); {{1|(1<<4)}, {21.675, 16}, 0}, // k11 KC_Q
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { {{1|(2<<4)}, {36.125, 16}, 0}, // k12 KC_W
// Turn capslock on {{1|(3<<4)}, {50.575, 16}, 0}, // k13 KC_E
PORTB |= (1<<4); {{1|(4<<4)}, {65.025, 16}, 0}, // k14 KC_R
} else { {{1|(5<<4)}, {79.475, 16}, 0}, // k15 KC_T
// Turn capslock off {{1|(6<<4)}, {93.925, 16}, 0}, // k16 KC_Y
PORTB &= ~(1<<4); {{1|(7<<4)}, {108.375, 16}, 0}, // k17 KC_U
} {{1|(8<<4)}, {122.825, 16}, 0}, // k60 KC_I
} {{1|(9<<4)}, {137.275, 16}, 0}, // k61 KC_O
{{1|(10<<4)}, {151.725, 16}, 0}, // k62 KC_P
{{1|(11<<4)}, {166.175, 16}, 0}, // k63 KC_LBRC
{{1|(12<<4)}, {180.625, 16}, 0}, // k64 KC_RBRC
{{1|(13<<4)}, {198.6875, 16}, 1}, // k65 KC_BSLS
{{1|(14<<4)}, {224, 16}, 1}, // k67 KC_PGDN
{{2|(0<<4)}, {5.41875, 32}, 1}, // k20 KC_CAPS
{{2|(1<<4)}, {25.2875, 32}, 0}, // k21 KC_A
{{2|(2<<4)}, {39.7375, 32}, 0}, // k22 KC_S
{{2|(3<<4)}, {54.1875, 32}, 0}, // k23 KC_D
{{2|(4<<4)}, {68.6375, 32}, 0}, // k24 KC_F
{{2|(5<<4)}, {83.0875, 32}, 0}, // k25 KC_G
{{2|(6<<4)}, {97.5375, 32}, 0}, // k26 KC_H
{{2|(7<<4)}, {111.9875, 32}, 0}, // k27 KC_J
{{2|(8<<4)}, {126.4375, 32}, 0}, // k70 KC_K
{{2|(9<<4)}, {140.8875, 32}, 0}, // k71 KC_L
{{2|(10<<4)}, {155.3375, 32}, 0}, // k72 KC_SCLN
{{2|(11<<4)}, {169.7875, 32}, 0}, // k73 KC_QUOT
{{2|(12<<4)}, {184.2375, 32}, 1}, // k75 KC_ENT
{{3|(0<<4)}, {16.25625, 48}, 1}, // k30 KC_LSFT
{{3|(1<<4)}, {32.5125, 48}, 0}, // k32 KC_Z
{{3|(2<<4)}, {46.9625, 48}, 0}, // k33 KC_X
{{3|(3<<4)}, {61.4125, 48}, 0}, // k34 KC_C
{{3|(4<<4)}, {75.8625, 48}, 0}, // k35 KC_V
{{3|(5<<4)}, {90.3125, 48}, 0}, // k36 KC_B
{{3|(6<<4)}, {104.7625, 48}, 0}, // k37 KC_N
{{3|(7<<4)}, {119.2125, 48}, 0}, // k80 KC_M
{{3|(8<<4)}, {133.6625, 48}, 0}, // k81 KC_COMM
{{3|(9<<4)}, {148.1125, 48}, 0}, // k82 KC_DOT
{{3|(10<<4)}, {162.5625, 48}, 0}, // k83 KC_SLSH
{{3|(11<<4)}, {187.85, 48}, 1}, // k85 KC_RSFT
{{3|(12<<4)}, {209.525, 48}, 1}, // k86 KC_UP
{{4|(0<<4)}, {9.03125, 64}, 1}, // k40 KC_LCTL
{{4|(1<<4)}, {27.09375, 64}, 1}, // k41 KC_LGUI
{{4|(2<<4)}, {45.15625, 64}, 1}, // k42 KC_LALT
{{4|(3<<4)}, {59.45, 64}, 1}, // Unassociated between LALT and SPACE_2.75
{{4|(4<<4)}, {73.9, 64}, 1}, // k45 KC_SPC SPACE_2.75
{{4|(5<<4)}, {88.35, 64}, 1}, // k45 KC_SPC SPACE_6.25
{{4|(6<<4)}, {102.8, 64}, 1}, // k46 KC_SPC SPACE_2.25
{{4|(7<<4)}, {117.40625, 64}, 1}, // Unassociated between SPACE_2.25 and SPACE_2.75
{{4|(8<<4)}, {135.46875, 64}, 1}, // k90 KC_RGUI
{{4|(9<<4)}, {153.53125, 64}, 1}, // k92 KC_RALT
{{4|(10<<4)}, {167.98125, 64}, 1}, // k93 MO(_FL)
{{4|(11<<4)}, {186.04375, 64}, 1}, // k94 KC_RCTL
{{4|(12<<4)}, {195.075, 64}, 1}, // k95 KC_LEFT
{{4|(13<<4)}, {209.525, 64}, 1}, // k96 KC_DOWN
{{4|(14<<4)}, {224, 64}, 1} // k97 KC_RGHT
};
#endif

52
keyboards/clueboard/66_hotswap/gen1/gen1.h
Unescape View File

@ -1,35 +1,57 @@
/* Copyright 2017 Clueboard <info@clueboard.co>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once #pragma once
#include "quantum.h" #include "quantum.h"
/*
* These are shortcuts to help you work with the various layout options. If your
* keymap works with one of the LAYOUT_...() macros you are encouraged to use that
* and to contribute your keymap to the corresponding layout in
* `qmk_firmware/layouts/community`.
*/
/* Clueboard matrix layout /* Clueboard matrix layout
* ,-----------------------------------------------------------. ,---. * ,-----------------------------------------------------------. ,---.
* | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 56| | 57| * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 56 | | 57|
* |-----------------------------------------------------------| |---| * |-----------------------------------------------------------| |---|
* | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67| * | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67|
* |-----------------------------------------------------------| `---' * |-----------------------------------------------------------| `---'
* | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 75| * | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 75|
* |-------------------------------------------------------------. * |--------------------------------------------------------------.
* | 30| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 85| 86| * | 30 | 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 85 |86|
* |-----------------------------------------------------------------. * |------------------------------------------------------------------.
* | 40| 41| 42| 45| 46| 90| 92| 93| 94| 95| 96| 97| * | 40| 41| 42| 45| 46| 90| 92| 93| 94| 95|96| 97|
* `-----------------------------------------------------------------' * `------------------------------------------------------------------'
* ,-----------------------------------------------------------. ,---. * ,-----------------------------------------------------------. ,---.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins| * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|
* |-----------------------------------------------------------| |---| * |-----------------------------------------------------------| |---|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|
* |-----------------------------------------------------------| `---' * |-----------------------------------------------------------| `---'
* |Caps | A| S| D| F| G| H| J| k| L| ;| '|Enter | * |Caps | A| S| D| F| G| H| J| k| L| ;| '|Enter |
* |-------------------------------------------------------------. * |--------------------------------------------------------------.
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Up | * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift| Up|
* |-----------------------------------------------------------------. * |------------------------------------------------------------------.
* |Ctrl|Alt |Gui | Space| Space|Gui |Alt |Fn |Ctrl|Lft|Dwn|Rgt| * |Ctrl|Alt|Gui | Space| Space|Gui |Alt |Fn |Ctrl|Left|Down|Rgt|
* `-----------------------------------------------------------------' * `------------------------------------------------------------------'
*/ */
// The first section contains all of the arguments // The first section contains all of the arguments
// The second converts the arguments into a two-dimensional array // The second converts the arguments into a two-dimensional array
#define LAYOUT( \ #define LAYOUT( \
k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k57, \
k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \
k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \
k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \
@ -40,7 +62,7 @@
{ k20, k21, k22, k23, k24, k25, k26, k27 }, \ { k20, k21, k22, k23, k24, k25, k26, k27 }, \
{ k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \
{ k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \ { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \
{ k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \
{ k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
{ k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
{ k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \
@ -48,7 +70,7 @@
} }
#define LAYOUT_66_ansi( \ #define LAYOUT_66_ansi( \
k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k57, \
k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \
k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \
k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \
@ -59,7 +81,7 @@
{ k20, k21, k22, k23, k24, k25, k26, k27 }, \ { k20, k21, k22, k23, k24, k25, k26, k27 }, \
{ k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \
{ k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \
{ k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \
{ k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
{ k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
{ k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \

388
keyboards/clueboard/66_hotswap/gen1/halconf.h
Unescape View File

@ -0,0 +1,388 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef HALCONF_H
#define HALCONF_H
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC TRUE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT TRUE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C TRUE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the QSPI subsystem.
*/
#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
#define HAL_USE_QSPI FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
#define MAC_USE_ZERO_COPY FALSE
#endif
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 16 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
/**
* @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
* @note The default is 256 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 1
#endif
/**
* @brief Serial over USB number of buffers.
* @note The default is 2 buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_NUMBER 2
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* UART driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
#define UART_USE_WAIT FALSE
#endif
/**
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define UART_USE_MUTUAL_EXCLUSION FALSE
#endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE
#endif
#endif /* HALCONF_H */
/** @} */

11
keyboards/clueboard/66_hotswap/gen1/info.json
Unescape View File

@ -0,0 +1,11 @@
{
"layouts": {
"LAYOUT": {
"layout": [{"x": 0, "y": 0, "w": 1, "label": "GRAVE"}, {"x": 1, "y": 0, "w": 1, "label": "1"}, {"x": 2, "y": 0, "w": 1, "label": "2"}, {"x": 3, "y": 0, "w": 1, "label": "3"}, {"x": 4, "y": 0, "w": 1, "label": "4"}, {"x": 5, "y": 0, "w": 1, "label": "5"}, {"x": 6, "y": 0, "w": 1, "label": "6"}, {"x": 7, "y": 0, "w": 1, "label": "7"}, {"x": 8, "y": 0, "w": 1, "label": "8"}, {"x": 9, "y": 0, "w": 1, "label": "9"}, {"x": 10, "y": 0, "w": 1, "label": "0"}, {"x": 11, "y": 0, "w": 1, "label": "DASH"}, {"x": 12, "y": 0, "w": 1, "label": "EQUALSIGN"}, {"x": 13, "y": 0, "w": 1, "label": "YEN"}, {"x": 14, "y": 0, "w": 1, "label": "BACKSPACE"}, {"x": 15.5, "y": 0, "w": 1, "label": "PAGEUP"}, {"x": 0, "y": 1, "w": 1.5, "label": "TAB"}, {"x": 1.5, "y": 1, "w": 1, "label": "Q"}, {"x": 2.5, "y": 1, "w": 1, "label": "W"}, {"x": 3.5, "y": 1, "w": 1, "label": "E"}, {"x": 4.5, "y": 1, "w": 1, "label": "R"}, {"x": 5.5, "y": 1, "w": 1, "label": "T"}, {"x": 6.5, "y": 1, "w": 1, "label": "Y"}, {"x": 7.5, "y": 1, "w": 1, "label": "U"}, {"x": 8.5, "y": 1, "w": 1, "label": "I"}, {"x": 9.5, "y": 1, "w": 1, "label": "O"}, {"x": 10.5, "y": 1, "w": 1, "label": "P"}, {"x": 11.5, "y": 1, "w": 1, "label": "LBRACKET"}, {"x": 12.5, "y": 1, "w": 1, "label": "RBRACKET"}, {"x": 13.5, "y": 1, "w": 1.5, "label": "BACKSLASH"}, {"x": 15.5, "y": 1, "w": 1, "label": "PAGEDOWN"}, {"x": 0, "y": 2, "w": 1.75, "label": "CAPSLOCK"}, {"x": 1.75, "y": 2, "w": 1, "label": "A"}, {"x": 2.75, "y": 2, "w": 1, "label": "S"}, {"x": 3.75, "y": 2, "w": 1, "label": "D"}, {"x": 4.75, "y": 2, "w": 1, "label": "F"}, {"x": 5.75, "y": 2, "w": 1, "label": "G"}, {"x": 6.75, "y": 2, "w": 1, "label": "H"}, {"x": 7.75, "y": 2, "w": 1, "label": "J"}, {"x": 8.75, "y": 2, "w": 1, "label": "K"}, {"x": 9.75, "y": 2, "w": 1, "label": "L"}, {"x": 10.75, "y": 2, "w": 1, "label": "SEMICOLON"}, {"x": 11.75, "y": 2, "w": 1, "label": "QUOTE"}, {"x": 13.75, "y": 2, "w": 1.25, "label": "ENTER"}, {"x": 0, "y": 3, "w": 1.25, "label": "LSHIFT"}, {"x": 2.25, "y": 3, "w": 1, "label": "Z"}, {"x": 3.25, "y": 3, "w": 1, "label": "X"}, {"x": 4.25, "y": 3, "w": 1, "label": "C"}, {"x": 5.25, "y": 3, "w": 1, "label": "V"}, {"x": 6.25, "y": 3, "w": 1, "label": "B"}, {"x": 7.25, "y": 3, "w": 1, "label": "N"}, {"x": 8.25, "y": 3, "w": 1, "label": "M"}, {"x": 9.25, "y": 3, "w": 1, "label": "COMMA"}, {"x": 10.25, "y": 3, "w": 1, "label": "PERIOD"}, {"x": 11.25, "y": 3, "w": 1, "label": "SLASH"}, {"x": 13.25, "y": 3, "w": 1.25, "label": "RSHIFT"}, {"x": 14.5, "y": 3, "w": 1, "label": "UP"}, {"x": 0, "y": 4, "w": 1.25, "label": "LCTRL"}, {"x": 1.25, "y": 4, "w": 1, "label": "LALT"}, {"x": 2.25, "y": 4, "w": 1.25, "label": "LCMD"}, {"x": 3.5, "y": 4, "w": 1.25, "label": "MUHENKAN"}, {"x": 4.75, "y": 4, "w": 2, "label": "SPACE1"}, {"x": 6.75, "y": 4, "w": 2, "label": "SPACE2"}, {"x": 8.75, "y": 4, "w": 1.25, "label": "HENKAN"}, {"x": 10, "y": 4, "w": 1.25, "label": "RCMD"}, {"x": 11.25, "y": 4, "w": 1, "label": "RCTRL"}, {"x": 12.25, "y": 4, "w": 1.25, "label": "FN"}, {"x": 13.5, "y": 4, "w": 1, "label": "LEFT"}, {"x": 14.5, "y": 4, "w": 1, "label": "DOWN"}, {"x": 15.5, "y": 4, "w": 1, "label": "RIGHT"}]
},
"LAYOUT_66_ansi": {
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"x":14.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}]
}
}
}

21
keyboards/clueboard/66_hotswap/gen1/led.c
Unescape View File

@ -0,0 +1,21 @@
/*
* Copyright 2017 skully <skullydazed@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "hal.h"
#include "backlight.h"
#include "led.h"
#include "printf.h"

160
keyboards/clueboard/66_hotswap/gen1/matrix.c
Unescape View File

@ -0,0 +1,160 @@
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include "hal.h"
#include "timer.h"
#include "wait.h"
#include "printf.h"
#include "backlight.h"
#include "matrix.h"
#include "action.h"
#include "keycode.h"
#include <string.h>
/*
* #define MATRIX_ROW_PINS { PB11, PA6, PA3, PA2, PA1, PB5, PB6, PC15, PC14, PC13 }
* #define MATRIX_COL_PINS { PB10, PB2, PB1, PB0, PA7, PB4, PB3, PB7 }
*/
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_COLS];
static bool debouncing = false;
static uint16_t debouncing_time = 0;
__attribute__ ((weak))
void matrix_init_user(void) {}
__attribute__ ((weak))
void matrix_scan_user(void) {}
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
void matrix_init(void) {
printf("matrix init\n");
//debug_matrix = true;
// actual matrix setup
palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 4, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 7, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOB, 11, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOA, 6, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOA, 1, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOB, 5, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOB, 6, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOC, 14, PAL_MODE_INPUT_PULLDOWN);
palSetPadMode(GPIOC, 13, PAL_MODE_INPUT_PULLDOWN);
memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t));
matrix_init_quantum();
}
uint8_t matrix_scan(void) {
// actual matrix
for (int col = 0; col < MATRIX_COLS; col++) {
matrix_row_t data = 0;
// strobe col { PB10, PB2, PB1, PB0, PA7, PB4, PB3, PB7 }
switch (col) {
case 0: palSetPad(GPIOB, 10); break;
case 1: palSetPad(GPIOB, 2); break;
case 2: palSetPad(GPIOB, 1); break;
case 3: palSetPad(GPIOB, 0); break;
case 4: palSetPad(GPIOA, 7); break;
case 5: palSetPad(GPIOB, 4); break;
case 6: palSetPad(GPIOB, 3); break;
case 7: palSetPad(GPIOB, 7); break;
}
// need wait to settle pin state
wait_us(20);
// read row data { PB11, PA6, PA3, PA2, PA1, PB5, PB6, PC15, PC14, PC13 }
data = (
(palReadPad(GPIOB, 11) << 0 ) |
(palReadPad(GPIOA, 6) << 1 ) |
(palReadPad(GPIOA, 3) << 2 ) |
(palReadPad(GPIOA, 2) << 3 ) |
(palReadPad(GPIOA, 1) << 4 ) |
(palReadPad(GPIOB, 5) << 5 ) |
(palReadPad(GPIOB, 6) << 6 ) |
(palReadPad(GPIOC, 15) << 7 ) |
(palReadPad(GPIOC, 14) << 8 ) |
(palReadPad(GPIOC, 13) << 9 )
);
// unstrobe col { B11, B10, B2, B1, A7, B0 }
switch (col) {
case 0: palClearPad(GPIOB, 10); break;
case 1: palClearPad(GPIOB, 2); break;
case 2: palClearPad(GPIOB, 1); break;
case 3: palClearPad(GPIOB, 0); break;
case 4: palClearPad(GPIOA, 7); break;
case 5: palClearPad(GPIOB, 4); break;
case 6: palClearPad(GPIOB, 3); break;
case 7: palClearPad(GPIOB, 7); break;
}
if (matrix_debouncing[col] != data) {
matrix_debouncing[col] = data;
debouncing = true;
debouncing_time = timer_read();
}
}
if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
for (int row = 0; row < MATRIX_ROWS; row++) {
matrix[row] = 0;
for (int col = 0; col < MATRIX_COLS; col++) {
matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col);
}
}
debouncing = false;
}
matrix_scan_quantum();
return 1;
}
bool matrix_is_on(uint8_t row, uint8_t col) {
return (matrix[row] & (1<<col));
}
matrix_row_t matrix_get_row(uint16_t row) {
return matrix[row];
}
void matrix_print(void) {
printf("\nr/c 01234567\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
printf("%X0: ", row);
matrix_row_t data = matrix_get_row(row);
for (int col = 0; col < MATRIX_COLS; col++) {
if (data & (1<<col))
printf("1");
else
printf("0");
}
printf("\n");
}
}

257
keyboards/clueboard/66_hotswap/gen1/mcuconf.h
Unescape View File

@ -0,0 +1,257 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef MCUCONF_H
#define MCUCONF_H
/*
* STM32F3xx drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 15...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
#define STM32F3xx_MCUCONF
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
#define STM32_HSI_ENABLED TRUE
#define STM32_LSI_ENABLED TRUE
#define STM32_HSE_ENABLED TRUE
#define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PREDIV_VALUE 1
#define STM32_PLLMUL_VALUE 9
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV2
#define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
#define STM32_USART1SW STM32_USART1SW_PCLK
#define STM32_USART2SW STM32_USART2SW_PCLK
#define STM32_USART3SW STM32_USART3SW_PCLK
#define STM32_UART4SW STM32_UART4SW_PCLK
#define STM32_UART5SW STM32_UART5SW_PCLK
#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
#define STM32_TIM1SW STM32_TIM1SW_PCLK2
#define STM32_TIM8SW STM32_TIM8SW_PCLK2
#define STM32_RTCSEL STM32_RTCSEL_LSI
#define STM32_USB_CLOCK_REQUIRED TRUE
#define STM32_USBPRE STM32_USBPRE_DIV1P5
#undef STM32_HSE_BYPASS
// #error "oh no"
// #endif
/*
* ADC driver system settings.
*/
#define STM32_ADC_DUAL_MODE FALSE
#define STM32_ADC_COMPACT_SAMPLES FALSE
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_USE_ADC2 FALSE
#define STM32_ADC_USE_ADC3 FALSE
#define STM32_ADC_USE_ADC4 FALSE
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC2_DMA_PRIORITY 2
#define STM32_ADC_ADC3_DMA_PRIORITY 2
#define STM32_ADC_ADC4_DMA_PRIORITY 2
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
#define STM32_ADC_ADC3_IRQ_PRIORITY 5
#define STM32_ADC_ADC4_IRQ_PRIORITY 5
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
/*
* CAN driver system settings.
*/
#define STM32_CAN_USE_CAN1 FALSE
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
/*
* DAC driver system settings.
*/
#define STM32_DAC_DUAL_MODE FALSE
#define STM32_DAC_USE_DAC1_CH1 TRUE
#define STM32_DAC_USE_DAC1_CH2 TRUE
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
/*
* EXT driver system settings.
*/
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6
#define STM32_EXT_EXTI33_IRQ_PRIORITY 6
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM4 FALSE
#define STM32_GPT_USE_TIM6 TRUE
#define STM32_GPT_USE_TIM7 TRUE
#define STM32_GPT_USE_TIM8 TRUE
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
#define STM32_GPT_TIM6_IRQ_PRIORITY 7
#define STM32_GPT_TIM7_IRQ_PRIORITY 7
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 TRUE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 10
#define STM32_I2C_I2C2_IRQ_PRIORITY 10
#define STM32_I2C_USE_DMA TRUE
#define STM32_I2C_I2C1_DMA_PRIORITY 1
#define STM32_I2C_I2C2_DMA_PRIORITY 1
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_USE_TIM4 FALSE
#define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_USE_TIM4 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USART1_PRIORITY 12
#define STM32_SERIAL_USART2_PRIORITY 12
#define STM32_SERIAL_USART3_PRIORITY 12
#define STM32_SERIAL_UART4_PRIORITY 12
#define STM32_SERIAL_UART5_PRIORITY 12
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 8
#define STM32_ST_USE_TIMER 2
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
/*
* WDG driver system settings.
*/
#define STM32_WDG_USE_IWDG FALSE
#endif /* MCUCONF_H */

70
keyboards/clueboard/66_hotswap/gen1/rules.mk
Unescape View File

@ -1,24 +1,58 @@
EXTRAFLAGS += -flto # project specific files
LAYOUTS = 66_ansi SRC = led.c
MCU = atmega32u4 LAYOUTS += 66_ansi
F_CPU = 16000000
ARCH = AVR8 ## chip/board settings
F_USB = $(F_CPU) # - the next two should match the directories in
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
OPT_DEFS += -DBOOTLOADER_SIZE=4096 MCU_FAMILY = STM32
MCU_SERIES = STM32F3xx
# Linker script to use
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
# or <this_dir>/ld/
MCU_LDSCRIPT = STM32F303xC
# Startup code to use
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
MCU_STARTUP = stm32f3xx
# Board: it should exist either in <chibios>/os/hal/boards/
# or <this_dir>/boards
BOARD = GENERIC_STM32_F303XC
# Cortex version
MCU = cortex-m4
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
ARMV = 7
USE_FPU = yes
# Vector table for application
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
OPT_DEFS =
# Options to pass to dfu-util when flashing
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
# LED Configuration
LED_MATRIX_ENABLE = IS31FL3731
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #
BACKLIGHT_ENABLE = yes BACKLIGHT_ENABLE = yes
BOOTMAGIC_ENABLE = no BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
MOUSEKEY_ENABLE = no ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
EXTRAKEY_ENABLE = yes MOUSEKEY_ENABLE = yes # Mouse keys
CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes # Audio control and System control
COMMAND_ENABLE = no CONSOLE_ENABLE = yes # Console for debug
NKRO_ENABLE = yes COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
#CUSTOM_MATRIX = yes # Custom matrix file
AUDIO_ENABLE = yes AUDIO_ENABLE = yes
RGBLIGHT_ENABLE = yes # SERIAL_LINK_ENABLE = yes
MIDI_ENABLE = no
UNICODE_ENABLE = no
BLUETOOTH_ENABLE = no

93
keyboards/clueboard/66_hotswap/keymaps/default/keymap.c
Unescape View File

@ -6,6 +6,30 @@
#define _FL 1 #define _FL 1
#define _CL 2 #define _CL 2
enum custom_keycodes {
S_BSKTC = SAFE_RANGE,
S_ODEJY,
S_RCKBY,
S_DOEDR,
S_SCALE,
S_ONEUP,
S_COIN,
S_SONIC,
S_ZELDA
};
#ifdef AUDIO_ENABLE
float song_basketcase[][2] = SONG(BASKET_CASE);
float song_ode_to_joy[][2] = SONG(ODE_TO_JOY);
float song_rock_a_bye_baby[][2] = SONG(ROCK_A_BYE_BABY);
float song_doe_a_deer[][2] = SONG(DOE_A_DEER);
float song_scale[][2] = SONG(MUSIC_SCALE_SOUND);
float song_coin[][2] = SONG(COIN_SOUND);
float song_one_up[][2] = SONG(ONE_UP_SOUND);
float song_sonic_ring[][2] = SONG(SONIC_RING);
float song_zelda_puzzle[][2] = SONG(ZELDA_PUZZLE);
#endif
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _BL: Base Layer (Default Layer) /* Keymap _BL: Base Layer (Default Layer)
*/ */
@ -28,9 +52,72 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Keymap _CL: Control layer /* Keymap _CL: Control layer
*/ */
[_CL] = LAYOUT( [_CL] = LAYOUT(
BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______, RGB_TOG, RGB_VAI, \ BL_STEP,S_ONEUP,S_SCALE,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______, BL_TOGG, BL_INC, \
_______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, \ _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, \
_______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, RGB_SAI, \ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, RGB_SAI, \
_______,_______,_______, RGB_MOD,RGB_MOD, _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), _______,_______,_______, BL_BRTG,BL_BRTG, _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI),
}; };
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
#ifdef AUDIO_ENABLE
case S_BSKTC:
if (record->event.pressed) {
stop_all_notes();
PLAY_SONG(song_basketcase);
}
return false;
case S_ODEJY:
if (record->event.pressed) {
stop_all_notes();
PLAY_SONG(song_ode_to_joy);
}
return false;
case S_RCKBY:
if (record->event.pressed) {
stop_all_notes();
PLAY_SONG(song_rock_a_bye_baby);
}
return false;
case S_DOEDR:
if (record->event.pressed) {
stop_all_notes();
PLAY_SONG(song_doe_a_deer);
}
return false;
case S_SCALE:
if (record->event.pressed) {
stop_all_notes();
PLAY_SONG(song_scale);
}
return false;
case S_ONEUP:
if (record->event.pressed) {
stop_all_notes();
PLAY_SONG(song_one_up);
}
return false;
case S_COIN:
if (record->event.pressed) {
stop_all_notes();
PLAY_SONG(song_coin);
}
return false;
case S_SONIC:
if (record->event.pressed) {
stop_all_notes();
PLAY_SONG(song_sonic_ring);
}
return false;
case S_ZELDA:
if (record->event.pressed) {
stop_all_notes();
PLAY_SONG(song_zelda_puzzle);
}
return false;
#endif
}
return true;
}

55
keyboards/clueboard/66_hotswap/prototype/config.h
Unescape View File

@ -0,0 +1,55 @@
#pragma once
#include "config_common.h"
#define PRODUCT_ID 0x2390
#define DEVICE_VER 0x0001
/* key matrix size */
#define MATRIX_ROWS 10
#define MATRIX_COLS 8
// ROWS: Top to bottom, COLS: Left to right
/* Row pin configuration
* row: 0 1 2 3 4 5 6 7 8 9
* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2
*/
#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 }
/* Column pin configuration
* col: 0 1 2 3 4 5 6 7
* pin: F0 F1 F4 F5 F6 F7 E6 B1
*/
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 }
#define UNUSED_PINS
/* Speaker configuration
*/
#define B7_AUDIO
#define NO_MUSIC_MODE
#define AUDIO_CLICKY
/* Space savings
*/
#define NO_ACTION_TAPPING
/* Backlight configuration
*/
#define BACKLIGHT_LEVELS 1
/* Underlight configuration
*/
#define RGB_DI_PIN D7
#define RGBLED_NUM 26 // Number of LEDs
#define RGBLIGHT_HUE_STEP 32
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
#define RGBLIGHT_ANIMATIONS
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1
#define RGBLIGHT_EFFECT_BREATHE_MAX 200
#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2
#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1
#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 4 // How many LEDs wide to light up
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 16 // The led to start at
#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 8 // How many LEDs to travel
#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // How many LEDs wide to light up

63
keyboards/clueboard/66_hotswap/prototype/prototype.c
Unescape View File

@ -0,0 +1,63 @@
#include "prototype.h"
#include <avr/io.h>
#include "backlight.h"
#include "print.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
led_init_ports();
// JTAG disable for PORT F. write JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
}
void matrix_scan_kb(void) {
matrix_scan_user();
}
void backlight_init_ports(void) {
print("init_backlight_pin()\n");
// Set our LED pins as output
DDRD |= (1<<0); // Esc
DDRD |= (1<<4); // Page Up
DDRD |= (1<<1); // Arrows
// Set our LED pins low
PORTD &= ~(1<<0); // Esc
PORTD &= ~(1<<4); // Page Up
PORTD &= ~(1<<1); // Arrows
}
void backlight_set(uint8_t level) {
if ( level == 0 ) {
// Turn off light
PORTD |= (1<<0); // Esc
PORTD |= (1<<4); // Page Up
PORTD |= (1<<1); // Arrows
} else {
// Turn on light
PORTD &= ~(1<<0); // Esc
PORTD &= ~(1<<4); // Page Up
PORTD &= ~(1<<1); // Arrows
}
}
void led_init_ports() {
// * Set our LED pins as output
DDRB |= (1<<4);
}
void led_set_kb(uint8_t usb_led) {
DDRB |= (1<<4);
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
// Turn capslock on
PORTB |= (1<<4);
} else {
// Turn capslock off
PORTB &= ~(1<<4);
}
}

86
keyboards/clueboard/66_hotswap/prototype/prototype.h
Unescape View File

@ -0,0 +1,86 @@
#pragma once
#include "quantum.h"
/* Clueboard matrix layout
* ,-----------------------------------------------------------. ,---.
* | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 56 | | 57|
* |-----------------------------------------------------------| |---|
* | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67|
* |-----------------------------------------------------------| `---'
* | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74| 75|
* |------------------------------------------------------------.
* | 30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84| 85|86|
* |------------------------------------------------------------------.
* | 40| 41| 42| 43| 45| 46| 90| 92| 93| 94| 95| 96| 97|
* `------------------------------------------------------------------'
* ,-----------------------------------------------------------. ,---.
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|
* |-----------------------------------------------------------| |---|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|
* |-----------------------------------------------------------| `---'
* |Caps | A| S| D| F| G| H| J| k| L| ;| '|Enter |
* |--------------------------------------------------------------.
* |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up|
* |------------------------------------------------------------------.
* |Ctrl|Alt|Gui | Space| Space|Gui |Alt |Fn |Ctrl|Left|Down|Rgt|
* `------------------------------------------------------------------'
*/
// The first section contains all of the arguments
// The second converts the arguments into a two-dimensional array
#define LAYOUT_all( \
k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \
k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \
k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \
k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \
k40, k41, k42, k45, k46, k90, k92, k93, k94, k95, k96, k97 \
) { \
{ k00, k01, k02, k03, k04, k05, k06, k07 }, \
{ k10, k11, k12, k13, k14, k15, k16, k17 }, \
{ k20, k21, k22, k23, k24, k25, k26, k27 }, \
{ k30, k31, k32, k33, k34, k35, k36, k37 }, \
{ k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \
{ k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \
{ k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
{ k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
{ k80, k81, k82, k83, k84, k85, k86, KC_NO }, \
{ k90, KC_NO, k92, k93, k94, k95, k96, k97 } \
}
#define LAYOUT( \
k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \
k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \
k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \
k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \
k40, k41, k42, k45, k46, k90, k92, k93, k94, k95, k96, k97 \
) { \
{ k00, k01, k02, k03, k04, k05, k06, k07 }, \
{ k10, k11, k12, k13, k14, k15, k16, k17 }, \
{ k20, k21, k22, k23, k24, k25, k26, k27 }, \
{ k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \
{ k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \
{ k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \
{ k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
{ k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
{ k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \
{ k90, KC_NO, k92, k93, k94, k95, k96, k97 } \
}
#define LAYOUT_66_ansi( \
k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \
k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \
k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \
k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \
k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \
) { \
{ k00, k01, k02, k03, k04, k05, k06, k07 }, \
{ k10, k11, k12, k13, k14, k15, k16, k17 }, \
{ k20, k21, k22, k23, k24, k25, k26, k27 }, \
{ k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \
{ k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \
{ k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \
{ k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
{ k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \
{ k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \
{ KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \
}

24
keyboards/clueboard/66_hotswap/prototype/rules.mk
Unescape View File

@ -0,0 +1,24 @@
EXTRAFLAGS += -flto
LAYOUTS = 66_ansi
MCU = atmega32u4
F_CPU = 16000000
ARCH = AVR8
F_USB = $(F_CPU)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BACKLIGHT_ENABLE = yes
BOOTMAGIC_ENABLE = no
MOUSEKEY_ENABLE = no
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = yes
COMMAND_ENABLE = no
NKRO_ENABLE = yes
AUDIO_ENABLE = yes
RGBLIGHT_ENABLE = yes
MIDI_ENABLE = no
UNICODE_ENABLE = no
BLUETOOTH_ENABLE = no
Write Preview
Loading…
Cancel
Save