forksand
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Added V2Protocol handlers to the AVRISP project to enter/exit programming mode, and read/write fuses, lockbits, OSCCAL and Signature bytes.

Browse Source 
Added ShutDown functions for all hardware peripheral drivers, so that peripherals can be turned off after use.
pull/1469/head
Dean Camera 16 years ago
parent d540276b44
commit 1e8df8951a
10 changed files with 303 additions and 45 deletions
Show Stats Download Patch File Download Diff File

4
LUFA/Drivers/Peripheral/AT90USBXXX67/ADC.h
Unescape View File

@ -122,7 +122,7 @@
/** Turns off the ADC. If this is called, any further ADC operations will require a call to /** Turns off the ADC. If this is called, any further ADC operations will require a call to
* \ref ADC_Init() before the ADC can be used again. * \ref ADC_Init() before the ADC can be used again.
*/ */
static inline void ADC_Off(void); static inline void ADC_ShutDown(void);
/** Indicates if the ADC is currently enabled. /** Indicates if the ADC is currently enabled.
* *
@ -145,7 +145,7 @@
#else #else
#define ADC_Init(mode) MACROS{ ADCSRA = ((1 << ADEN) | mode); }MACROE #define ADC_Init(mode) MACROS{ ADCSRA = ((1 << ADEN) | mode); }MACROE
#define ADC_Off() MACROS{ ADCSRA = 0; }MACROE #define ADC_ShutDown() MACROS{ ADCSRA = 0; }MACROE
#define ADC_GetStatus() ((ADCSRA & (1 << ADEN)) ? true : false) #define ADC_GetStatus() ((ADCSRA & (1 << ADEN)) ? true : false)

10
LUFA/Drivers/Peripheral/SPI.h
Unescape View File

@ -108,6 +108,16 @@
SPSR &= ~(1 << SPI2X); SPSR &= ~(1 << SPI2X);
} }
/** Turns off the SPI driver, disabling and returning used hardware to their default configuration. */
static inline void SPI_ShutDown(void)
{
DDRB &= ~((1 << 1) | (1 << 2));
PORTB &= ~((1 << 0) | (1 << 3));
SPCR = 0;
SPSR = 0;
}
/** Sends and receives a byte through the SPI interface, blocking until the transfer is complete. /** Sends and receives a byte through the SPI interface, blocking until the transfer is complete.
* *
* \param[in] Byte Byte to send through the SPI interface * \param[in] Byte Byte to send through the SPI interface

13
LUFA/Drivers/Peripheral/Serial.h
Unescape View File

@ -118,6 +118,19 @@
UBRR1 = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate)); UBRR1 = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate));
} }
/** Turns off the USART driver, disabling and returning used hardware to their default configuration. */
static inline void Serial_ShutDown(void)
{
UCSR1A = 0;
UCSR1B = 0;
UCSR1C = 0;
DDRD &= ~(1 << 3);
PORTD &= ~(1 << 2);
UBRR1 = 0;
}
/** Transmits a given byte through the USART. /** Transmits a given byte through the USART.
* *
* \param[in] DataByte Byte to transmit through the USART * \param[in] DataByte Byte to transmit through the USART

8
LUFA/Drivers/Peripheral/SerialStream.h
Unescape View File

@ -89,6 +89,14 @@
stdout = &USARTStream; stdout = &USARTStream;
} }
/** Turns off the serial stream (and regular USART driver), disabling and returning used hardware to
* their default configuration.
*/
static inline void SerialStream_ShutDown(void)
{
Serial_ShutDown();
}
/* Disable C linkage for C++ Compilers: */ /* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus) #if defined(__cplusplus)
} }

1
LUFA/ManPages/ChangeLog.txt
Unescape View File

@ -15,6 +15,7 @@
* USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode * USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode
* - Added new Endpoint_SetEndpointDirection() macro for bi-directional endpoints * - Added new Endpoint_SetEndpointDirection() macro for bi-directional endpoints
* - Added new AVRISP project, a LUFA clone of the Atmel AVRISP-MKII programmer * - Added new AVRISP project, a LUFA clone of the Atmel AVRISP-MKII programmer
* - Added ShutDown functions for all hardware peripheral drivers, so that peripherals can be turned off after use
* *
* <b>Changed:</b> * <b>Changed:</b>
* - SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested * - SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested

4
LUFA/ManPages/MigrationInformation.txt
Unescape View File

@ -11,7 +11,9 @@
* areas relevant to making older projects compatible with the API changes of each new release. * areas relevant to making older projects compatible with the API changes of each new release.
* *
* \section Sec_MigrationXXXXXX Migrating from 090810 to XXXXXX * \section Sec_MigrationXXXXXX Migrating from 090810 to XXXXXX
* No migration information for this version yet. *
* <b>Non-USB Library Components</b>
* - The ADC_Off() function has been renamed to \ref ADC_ShutDown() to be consistent with the rest of the library.
* *
* \section Sec_Migration090810 Migrating from 090605 to 090810 * \section Sec_Migration090810 Migrating from 090605 to 090810
* *

1
Projects/Incomplete/AVRISP/AVRISP.c
Unescape View File

@ -69,7 +69,6 @@ void SetupHardware(void)
/* Hardware Initialization */ /* Hardware Initialization */
SerialStream_Init(9600, false); SerialStream_Init(9600, false);
SPI_Init(0, true);
LEDs_Init(); LEDs_Init();
USB_Init(); USB_Init();
} }

273
Projects/Incomplete/AVRISP/Lib/V2Protocol.c
Unescape View File

@ -40,7 +40,7 @@ uint32_t CurrentAddress;
/* Table of masks for SPI_Init() from a given PARAM_SCK_DURATION value */ /* Table of masks for SPI_Init() from a given PARAM_SCK_DURATION value */
static const uint8_t SPIMaskFromSCKDuration[MAX_SPI_SETTINGS] = static const uint8_t SPIMaskFromSCKDuration[] =
{ {
#if (F_CPU == 8000000) #if (F_CPU == 8000000)
SPI_SPEED_FCPU_DIV_2, SPI_SPEED_FCPU_DIV_2,
@ -52,14 +52,14 @@ static const uint8_t SPIMaskFromSCKDuration[MAX_SPI_SETTINGS] =
#endif #endif
}; };
static void V2Protocol_ReconfigureSPI(void) static uint8_t V2Protocol_GetSPIPrescalerMask(void)
{ {
uint8_t SCKDuration = V2Params_GetParameterValue(PARAM_SCK_DURATION); uint8_t SCKDuration = V2Params_GetParameterValue(PARAM_SCK_DURATION);
if (SCKDuration >= MAX_SPI_SETTINGS) if (SCKDuration >= sizeof(SPIMaskFromSCKDuration))
SCKDuration = (MAX_SPI_SETTINGS - 1); SCKDuration = (sizeof(SPIMaskFromSCKDuration) - 1);
SPI_Init(SPIMaskFromSCKDuration[SCKDuration], true); return SPIMaskFromSCKDuration[SCKDuration];
} }
static void V2Protocol_ChangeTargetResetLine(bool ResetTarget) static void V2Protocol_ChangeTargetResetLine(bool ResetTarget)
@ -78,6 +78,35 @@ static void V2Protocol_ChangeTargetResetLine(bool ResetTarget)
} }
} }
static void V2Protocol_DelayMS(uint8_t MS)
{
while (MS--)
_delay_ms(1);
}
static uint8_t V2Protocol_WaitWhileTargetBusy(void)
{
uint8_t TimeoutMS = TARGET_BUST_TIMEOUT_MS;
uint8_t ResponseByte;
do
{
V2Protocol_DelayMS(1);
SPI_SendByte(0xF0);
SPI_SendByte(0x00);
SPI_SendByte(0x00);
ResponseByte = SPI_ReceiveByte();
}
while ((ResponseByte & 0x01) && (TimeoutMS--));
if (!(TimeoutMS))
return STATUS_CMD_TOUT;
else
return STATUS_CMD_OK;
}
void V2Protocol_ProcessCommand(void) void V2Protocol_ProcessCommand(void)
{ {
uint8_t V2Command = Endpoint_Read_Byte(); uint8_t V2Command = Endpoint_Read_Byte();
@ -94,6 +123,25 @@ void V2Protocol_ProcessCommand(void)
case CMD_LOAD_ADDRESS: case CMD_LOAD_ADDRESS:
V2Protocol_Command_LoadAddress(); V2Protocol_Command_LoadAddress();
break; break;
case CMD_ENTER_PROGMODE_ISP:
V2Protocol_Command_EnterISPMode();
break;
case CMD_LEAVE_PROGMODE_ISP:
V2Protocol_Command_LeaveISPMode();
break;
case CMD_CHIP_ERASE_ISP:
V2Protocol_Command_ChipErase();
break;
case CMD_READ_FUSE_ISP:
case CMD_READ_LOCK_ISP:
case CMD_READ_SIGNATURE_ISP:
case CMD_READ_OSCCAL_ISP:
V2Protocol_Command_ReadFuseLockSigOSCCAL(V2Command);
break;
case CMD_PROGRAM_FUSE_ISP:
case CMD_PROGRAM_LOCK_ISP:
V2Protocol_Command_WriteFuseLock(V2Command);
break;
case CMD_SPI_MULTI: case CMD_SPI_MULTI:
V2Protocol_Command_SPIMulti(); V2Protocol_Command_SPIMulti();
break; break;
@ -132,38 +180,40 @@ static void V2Protocol_Command_SignOn(void)
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady(); Endpoint_WaitUntilReady();
V2Protocol_ReconfigureSPI();
CurrentAddress = 0;
Endpoint_Write_Byte(CMD_SIGN_ON); Endpoint_Write_Byte(CMD_SIGN_ON);
Endpoint_Write_Byte(STATUS_CMD_OK); Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(PROGRAMMER_ID_LEN); Endpoint_Write_Byte(sizeof(PROGRAMMER_ID) - 1);
Endpoint_Write_Stream_LE(PROGRAMMER_ID, PROGRAMMER_ID_LEN); Endpoint_Write_Stream_LE(PROGRAMMER_ID, (sizeof(PROGRAMMER_ID) - 1));
Endpoint_ClearIN(); Endpoint_ClearIN();
} }
static void V2Protocol_Command_GetSetParam(uint8_t V2Command) static void V2Protocol_Command_GetSetParam(uint8_t V2Command)
{ {
uint8_t ParamID = Endpoint_Read_Byte(); struct
uint8_t ParamValue = Endpoint_Read_Byte(); {
uint8_t ParamID;
uint8_t ParamValue;
} Get_Set_Param_Params;
Endpoint_Read_Stream_LE(&Get_Set_Param_Params, sizeof(Get_Set_Param_Params));
Endpoint_ClearOUT(); Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady(); Endpoint_WaitUntilReady();
uint8_t ParamPrivs = V2Params_GetParameterPrivellages(ParamID); uint8_t ParamPrivs = V2Params_GetParameterPrivellages(Get_Set_Param_Params.ParamID);
Endpoint_Write_Byte(V2Command); Endpoint_Write_Byte(V2Command);
if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE)) if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE))
{ {
Endpoint_Write_Byte(STATUS_CMD_OK); Endpoint_Write_Byte(STATUS_CMD_OK);
V2Params_SetParameterValue(ParamID, ParamValue); V2Params_SetParameterValue(Get_Set_Param_Params.ParamID, Get_Set_Param_Params.ParamValue);
} }
else if ((V2Command == CMD_GET_PARAMETER) && (ParamPrivs & PARAM_PRIV_READ)) else if ((V2Command == CMD_GET_PARAMETER) && (ParamPrivs & PARAM_PRIV_READ))
{ {
Endpoint_Write_Byte(STATUS_CMD_OK); Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(V2Params_GetParameterValue(ParamID)); Endpoint_Write_Byte(V2Params_GetParameterValue(Get_Set_Param_Params.ParamID));
} }
else else
{ {
@ -175,25 +225,194 @@ static void V2Protocol_Command_GetSetParam(uint8_t V2Command)
static void V2Protocol_Command_LoadAddress(void) static void V2Protocol_Command_LoadAddress(void)
{ {
CurrentAddress = Endpoint_Read_DWord_LE(); Endpoint_Read_Stream_LE(&CurrentAddress, sizeof(CurrentAddress));
Endpoint_ClearOUT(); Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady(); Endpoint_WaitUntilReady();
// TODO: Check for extended address
Endpoint_Write_Byte(CMD_LOAD_ADDRESS); Endpoint_Write_Byte(CMD_LOAD_ADDRESS);
Endpoint_Write_Byte(STATUS_CMD_OK); Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN(); Endpoint_ClearIN();
} }
static void V2Protocol_Command_EnterISPMode(void)
{
struct
{
uint8_t TimeoutMS;
uint8_t PinStabDelayMS;
uint8_t ExecutionDelayMS;
uint8_t SynchLoops;
uint8_t ByteDelay;
uint8_t PollValue;
uint8_t PollIndex;
uint8_t EnterProgBytes[4];
} Enter_ISP_Params;
Endpoint_Read_Stream_LE(&Enter_ISP_Params, sizeof(Enter_ISP_Params));
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
uint8_t SCKDuration = V2Params_GetParameterValue(PARAM_SCK_DURATION);
uint8_t ResponseStatus = STATUS_CMD_FAILED;
Enter_ISP_Params.TimeoutMS -= Enter_ISP_Params.ExecutionDelayMS +
Enter_ISP_Params.PinStabDelayMS;
CurrentAddress = 0;
if (SCKDuration >= sizeof(SPIMaskFromSCKDuration))
SCKDuration = (sizeof(SPIMaskFromSCKDuration) - 1);
V2Protocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS);
SPI_Init(SPIMaskFromSCKDuration[SCKDuration], true);
V2Protocol_ChangeTargetResetLine(true);
V2Protocol_DelayMS(Enter_ISP_Params.PinStabDelayMS);
while (Enter_ISP_Params.SynchLoops-- && (ResponseStatus == STATUS_CMD_FAILED))
{
uint8_t ResponseBytes[4];
for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
{
ResponseBytes[RByte] = SPI_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]);
V2Protocol_DelayMS(Enter_ISP_Params.ByteDelay);
if (Enter_ISP_Params.TimeoutMS >= Enter_ISP_Params.ByteDelay)
Enter_ISP_Params.TimeoutMS -= Enter_ISP_Params.ByteDelay;
else
ResponseStatus = STATUS_CMD_TOUT;
}
if (ResponseBytes[Enter_ISP_Params.PollIndex] == Enter_ISP_Params.PollValue)
ResponseStatus = STATUS_CMD_OK;
}
Endpoint_Write_Byte(CMD_ENTER_PROGMODE_ISP);
Endpoint_Write_Byte(ResponseStatus);
Endpoint_ClearIN();
}
static void V2Protocol_Command_LeaveISPMode(void)
{
struct
{
uint8_t PreDelayMS;
uint8_t PostDelayMS;
} Leave_ISP_Params;
Endpoint_Read_Stream_LE(&Leave_ISP_Params, sizeof(Leave_ISP_Params));
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
V2Protocol_DelayMS(Leave_ISP_Params.PreDelayMS);
V2Protocol_ChangeTargetResetLine(false);
SPI_ShutDown();
V2Protocol_DelayMS(Leave_ISP_Params.PostDelayMS);
Endpoint_Write_Byte(CMD_LEAVE_PROGMODE_ISP);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
}
static void V2Protocol_Command_ChipErase(void)
{
struct
{
uint8_t EraseDelayMS;
uint8_t PollMethod;
uint8_t EraseCommandBytes[4];
} Erase_Chip_Params;
Endpoint_Read_Stream_LE(&Erase_Chip_Params, sizeof(Erase_Chip_Params));
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
uint8_t ResponseStatus = STATUS_CMD_OK;
for (uint8_t SByte = 0; SByte < sizeof(Erase_Chip_Params.EraseCommandBytes); SByte++)
SPI_SendByte(Erase_Chip_Params.EraseCommandBytes[SByte]);
if (Erase_Chip_Params.PollMethod == 0)
V2Protocol_DelayMS(Erase_Chip_Params.EraseDelayMS);
else
ResponseStatus = V2Protocol_WaitWhileTargetBusy();
Endpoint_Write_Byte(CMD_CHIP_ERASE_ISP);
Endpoint_Write_Byte(ResponseStatus);
Endpoint_ClearIN();
}
static void V2Protocol_Command_ReadFuseLockSigOSCCAL(uint8_t V2Command)
{
struct
{
uint8_t RetByte;
uint8_t ReadCommandBytes[4];
} Read_FuseLockSigOSCCAL_Params;
Endpoint_Read_Stream_LE(&Read_FuseLockSigOSCCAL_Params, sizeof(Read_FuseLockSigOSCCAL_Params));
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
uint8_t ResponseBytes[4];
for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
ResponseBytes[RByte] = SPI_TransferByte(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(ResponseBytes[Read_FuseLockSigOSCCAL_Params.RetByte]);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
}
static void V2Protocol_Command_WriteFuseLock(uint8_t V2Command)
{
struct
{
uint8_t WriteCommandBytes[4];
} Write_FuseLockSig_Params;
Endpoint_Read_Stream_LE(&Write_FuseLockSig_Params, sizeof(Write_FuseLockSig_Params));
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
for (uint8_t SByte = 0; SByte < sizeof(Write_FuseLockSig_Params.WriteCommandBytes); SByte++)
SPI_SendByte(Write_FuseLockSig_Params.WriteCommandBytes[SByte]);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_Write_Byte(STATUS_CMD_OK);
Endpoint_ClearIN();
}
static void V2Protocol_Command_SPIMulti(void) static void V2Protocol_Command_SPIMulti(void)
{ {
uint8_t TxBytes = Endpoint_Read_Byte(); struct
uint8_t RxBytes = Endpoint_Read_Byte(); {
uint8_t RxStartAddr = Endpoint_Read_Byte(); uint8_t TxBytes;
uint8_t TxData[255]; uint8_t RxBytes;
uint8_t RxStartAddr;
uint8_t TxData[255];
} SPI_Multi_Params;
Endpoint_Read_Stream_LE(TxData, TxBytes); Endpoint_Read_Stream_LE(&SPI_Multi_Params, sizeof(SPI_Multi_Params) -
sizeof(SPI_Multi_Params.TxData));
Endpoint_Read_Stream_LE(&SPI_Multi_Params.TxData, SPI_Multi_Params.TxBytes);
Endpoint_ClearOUT(); Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
@ -206,10 +425,10 @@ static void V2Protocol_Command_SPIMulti(void)
uint8_t CurrRxPos = 0; uint8_t CurrRxPos = 0;
/* Write out bytes to transmit until the start of the bytes to receive is met */ /* Write out bytes to transmit until the start of the bytes to receive is met */
while (CurrTxPos < RxStartAddr) while (CurrTxPos < SPI_Multi_Params.RxStartAddr)
{ {
if (CurrTxPos < TxBytes) if (CurrTxPos < SPI_Multi_Params.TxBytes)
SPI_SendByte(TxData[CurrTxPos]); SPI_SendByte(SPI_Multi_Params.TxData[CurrTxPos]);
else else
SPI_SendByte(0); SPI_SendByte(0);
@ -217,10 +436,10 @@ static void V2Protocol_Command_SPIMulti(void)
} }
/* Transmit remaining bytes with padding as needed, read in response bytes */ /* Transmit remaining bytes with padding as needed, read in response bytes */
while (CurrRxPos < RxBytes) while (CurrRxPos < SPI_Multi_Params.RxBytes)
{ {
if (CurrTxPos < TxBytes) if (CurrTxPos < SPI_Multi_Params.TxBytes)
Endpoint_Write_Byte(SPI_TransferByte(TxData[CurrTxPos++])); Endpoint_Write_Byte(SPI_TransferByte(SPI_Multi_Params.TxData[CurrTxPos++]));
else else
Endpoint_Write_Byte(SPI_ReceiveByte()); Endpoint_Write_Byte(SPI_ReceiveByte());

28
Projects/Incomplete/AVRISP/Lib/V2Protocol.h
Unescape View File

@ -38,6 +38,7 @@
/* Includes: */ /* Includes: */
#include <avr/io.h> #include <avr/io.h>
#include <util/delay.h>
#include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Peripheral/SPI.h> #include <LUFA/Drivers/Peripheral/SPI.h>
@ -47,23 +48,28 @@
#include "V2ProtocolParams.h" #include "V2ProtocolParams.h"
/* Macros: */ /* Macros: */
#define PROGRAMMER_ID "AVRISP_MK2" #define PROGRAMMER_ID "AVRISP_MK2"
#define PROGRAMMER_ID_LEN (sizeof(PROGRAMMER_ID) - 1) #define TARGET_BUST_TIMEOUT_MS 100
#define MAX_SPI_SETTINGS 7
/* Function Prototypes: */ /* Function Prototypes: */
void V2Protocol_ProcessCommand(void); void V2Protocol_ProcessCommand(void);
#if defined(INCLUDE_FROM_V2PROTOCOL_C) #if defined(INCLUDE_FROM_V2PROTOCOL_C)
static void V2Protocol_ReconfigureSPI(void); static uint8_t V2Protocol_GetSPIPrescalerMask(void);
static void V2Protocol_ChangeTargetResetLine(bool ResetTarget); static void V2Protocol_ChangeTargetResetLine(bool ResetTarget);
static void V2Protocol_DelayMS(uint8_t MS);
static void V2Protocol_Command_Unknown(uint8_t V2Command); static uint8_t V2Protocol_WaitWhileTargetBusy(void);
static void V2Protocol_Command_SignOn(void);
static void V2Protocol_Command_GetSetParam(uint8_t V2Command); static void V2Protocol_Command_Unknown(uint8_t V2Command);
static void V2Protocol_Command_LoadAddress(void); static void V2Protocol_Command_SignOn(void);
static void V2Protocol_Command_SPIMulti(void); static void V2Protocol_Command_GetSetParam(uint8_t V2Command);
static void V2Protocol_Command_LoadAddress(void);
static void V2Protocol_Command_EnterISPMode(void);
static void V2Protocol_Command_LeaveISPMode(void);
static void V2Protocol_Command_ChipErase(void);
static void V2Protocol_Command_ReadFuseLockSigOSCCAL(uint8_t V2Command);
static void V2Protocol_Command_WriteFuseLock(uint8_t V2Command);
static void V2Protocol_Command_SPIMulti(void);
#endif #endif
#endif #endif

2
Projects/Incomplete/AVRISP/Lib/V2ProtocolParams.c
Unescape View File

@ -67,7 +67,7 @@ static ParameterItem_t ParameterTable[] =
.ParamPrivellages = PARAM_PRIV_READ }, .ParamPrivellages = PARAM_PRIV_READ },
{ .ParamID = PARAM_SCK_DURATION, { .ParamID = PARAM_SCK_DURATION,
.ParamValue = MAX_SPI_SETTINGS, .ParamValue = 0,
.ParamPrivellages = PARAM_PRIV_READ | PARAM_PRIV_WRITE }, .ParamPrivellages = PARAM_PRIV_READ | PARAM_PRIV_WRITE },
{ .ParamID = PARAM_RESET_POLARITY, { .ParamID = PARAM_RESET_POLARITY,

Write Preview
Loading…
Cancel
Save