tmk
12 years ago
parent
16a583d7fd
commit
208f6d7f91
@ -1,151 +0,0 @@
|
||||
Alternative Controller for HHKB
|
||||
===============================
|
||||
|
||||
Feature
|
||||
-------
|
||||
- Mouse Keys
|
||||
- NKRO on USB(PJRC Tennsy only)
|
||||
- Keymap Layers
|
||||
|
||||
|
||||
Customize Keymap
|
||||
----------------
|
||||
see keymap.c.
|
||||
|
||||
|
||||
|
||||
Build
|
||||
=====
|
||||
PJRC Teensy
|
||||
-----------
|
||||
0. Edit matrix.c.
|
||||
adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
|
||||
1. Define macros in config_pjrc.h.(Optional)
|
||||
VENDOR_ID, PRODUCT_ID and string descriptor.
|
||||
IS_COMMAND
|
||||
2. Edit Makefile for MCU setting and build options.
|
||||
MCU, F_CPU
|
||||
MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, NKRO_ENABLE
|
||||
3. Build hex file.
|
||||
$ make -f Makefile.pjrc
|
||||
4. Program MCU.
|
||||
$ make -f Makefile.pjrc program
|
||||
|
||||
|
||||
V-USB
|
||||
-----
|
||||
0. Edit matrix.c and usbconfig.h.
|
||||
adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
|
||||
define macros for V-USB in usbconfig.h.
|
||||
1. Define macros in config_vusb.h.(Optional)
|
||||
IS_COMMAND
|
||||
2. Edit Makefile.vusb for MCU setting and build options.
|
||||
MCU, F_CPU
|
||||
MOUSEKEY_ENABLE, EXTRAKEY_ENABLE
|
||||
3. Build hex file.
|
||||
$ make -f Makefile.vusb
|
||||
4. Program MCU.
|
||||
$ make -f Makefile.vusb program
|
||||
|
||||
Using a bootloader to program for convenience is recommended.
|
||||
Once program this V-USB bootloader at first, you can program MCU without
|
||||
extra programmer. You should have reset switch to start up as bootloader
|
||||
mode in this case.
|
||||
USBaspLoader:
|
||||
http://www.obdev.at/products/vusb/usbasploader.html
|
||||
|
||||
|
||||
iWRAP
|
||||
-----
|
||||
0. Edit matrix.c and usbconfig.h.
|
||||
adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
|
||||
define macros for V-USB in usbconfig.h.
|
||||
1. Define macros in config_iwrap.h.(Optional)
|
||||
IS_COMMAND
|
||||
2. Edit Makefile.iwrap for MCU setting and build options.
|
||||
MCU, F_CPU
|
||||
MOUSEKEY_ENABLE, EXTRAKEY_ENABLE
|
||||
3. Build hex file.
|
||||
$ make -f Makefile.iwrap
|
||||
4. Program MCU.
|
||||
$ make -f Makefile.iwrap program
|
||||
|
||||
|
||||
|
||||
Hardware
|
||||
========
|
||||
PJRC Teensy
|
||||
-----------
|
||||
+---------------+
|
||||
| Teensy++ |
|
||||
| |
|
||||
| | HHKB
|
||||
| | ~~~~
|
||||
| PB0-2|------->ROW(6-8)
|
||||
| PB3-5|------->COL(9-11)
|
||||
| PB6|------->ENABLE(12)
|
||||
| PE6|<-------KEY(4)
|
||||
| PE7|------->PREV(5)
|
||||
| |
|
||||
| |
|
||||
| |
|
||||
+---------------+
|
||||
|
||||
|
||||
V-USB
|
||||
-----
|
||||
+---+ +---------------+
|
||||
USB GND | | ATmega168 |
|
||||
~~~ C3 | |
|
||||
5V <-------+--------+---|Vcc,AVCC | HHKB
|
||||
R1 | | ~~~~
|
||||
D- <----+--+-----R2-----|INT1 PB2-4|------->ROW(6-8)
|
||||
D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
|
||||
Z1 Z2 | PC3|------->ENABLE(12)
|
||||
GND<----+---+-----------|GND PB0|<-------KEY(4)
|
||||
| PB1|------->PREV(5)
|
||||
| |
|
||||
GND+-C2--+--|XTAL1 RXD|------->Debug Console
|
||||
X1 | TXD|<-------Debug Console
|
||||
GND+-C3--+--|XTAL2 RST|---SW--+GND
|
||||
+---------------+
|
||||
R1: 1.5K Ohm
|
||||
R2,R3: 68 Ohm
|
||||
Z1,Z2: Zener 3.6V
|
||||
C1,C2: 22pF
|
||||
C3: 0.1uF
|
||||
X1: Crystal 20MHz(16MHz/12MHz)
|
||||
SW: Push Switch(Optional for bootloader)
|
||||
|
||||
|
||||
iWRAP
|
||||
-----
|
||||
+---------------+ WT12
|
||||
5V | ATmega168 | 5V/3.3V~~~~
|
||||
+-----+---|Vcc,AVCC PC4|---/--->iWRAP(RxD)
|
||||
USB | C3 | PC5|<--/----iWRAP(TxD)
|
||||
~~~ | + | |
|
||||
5V <--BATT + GND | | HHKB
|
||||
R1 | | ~~~~
|
||||
D- <----+-----+--R2-----|INT1 PB2-4|------->ROW(6-8)
|
||||
D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
|
||||
Z1 Z2 | PC3|------->ENABLE(12)
|
||||
GND<----+---+-----------|GND PB0|<-------KEY(4)
|
||||
| PB1|------->PREV(5)
|
||||
| |
|
||||
GND+-C2--+--|XTAL1 RXD|------->Debug Console
|
||||
X1 | TXD|<-------Debug Console
|
||||
GND+-C3--+--|XTAL2 RST|---SW--+GND
|
||||
+---------------+
|
||||
|
||||
R1: 1.5K Ohm
|
||||
R2,R3: 68 Ohm
|
||||
Z1,Z2: Zener 3.6V
|
||||
C1,C2: 22pF
|
||||
C3: 0.1uF
|
||||
X1: Crystal 12MHz
|
||||
SW: Push Switch(Optional)
|
||||
BATT: Li-Po Battery, Battery Charger and Voltage Regulator(5V and 3.3V).
|
||||
|
||||
|
||||
EOF
|
||||
@ -0,0 +1,135 @@
|
||||
Alternative Controller for HHKB Pro
|
||||
===================================
|
||||
I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and
|
||||
firmware source code is not open, of course. This means customizing this keyboard needs to replace original
|
||||
controller with programmable one. For this purpose I used PJRC [Teensy++][Teensy] as alternative controller.
|
||||
|
||||
[HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
|
||||
[Teensy]: http://www.pjrc.com/teensy/
|
||||
|
||||
|
||||
My keyboard firmware source tree is here: http://github.com/tmk/tmk_keyboard
|
||||
See directory keyboard/hhkb to build firmware for HHKB.
|
||||
|
||||
|
||||
##Features
|
||||
* Customizable keymap
|
||||
* More keymap layers(more Fn keys)
|
||||
* Mouse keys
|
||||
* USB NKRO
|
||||
|
||||
###Pros
|
||||
* Without PCB trace cutting, case mod or any destructives
|
||||
* Can keep original controller intact
|
||||
* Can change all HHKB behaviour as you like
|
||||
|
||||
###Cons
|
||||
* Void your warranty
|
||||
* Lose USB hub function in case of Pro2
|
||||
|
||||
##DISCLAIMER
|
||||
I'm not a professional of electronics or MCU programming. This may damage your HHKB.
|
||||
And my English writing is poor, I'm not sure I can convey my notions accurately.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
##Build Firmware
|
||||
You can choose some combination of MCU and USB protocol stack.
|
||||
|
||||
### Teensy++(AVR USB family) with [LUFA]
|
||||
0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
|
||||
|
||||
1. Edit **keymap.c** to use your favoirte keymap.
|
||||
|
||||
2. Edit **Makefile** if you want to use other `MCU` than Teensy++ 2.0.
|
||||
|
||||
3. Build firmware binary file:
|
||||
`$ make -f Makefile.lufa`
|
||||
|
||||
4. Program MCU with PJRC [Teensy Loader] tool. If you install command line version of the loader just run:
|
||||
`$ make -f Makefile.lufa teensy`
|
||||
|
||||
[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
|
||||
[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
|
||||
|
||||
|
||||
###AVR Mega with [V-USB]
|
||||
Follow below if you want to use AVR with V-USB as .
|
||||
|
||||
0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
|
||||
|
||||
1. Edit **keymap.c** to use your favoirte keymap.
|
||||
|
||||
2. Edit **usbconfig.h** to configure V-USB options.
|
||||
|
||||
3. Edit **Makefile.vusb** to define `MCU` and `F_CPU`.
|
||||
|
||||
4. Build firmware binary file:
|
||||
`$ make -f Makefile.vusb`
|
||||
|
||||
5. Program MCU with AVR programmer like AVRISPmkII. If you already have [USBaspLoader] on MCU just run:
|
||||
`$ make -f Makefile.vusb program`
|
||||
|
||||
[V-USB]: http://www.obdev.at/products/vusb/index.html
|
||||
[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
|
||||
|
||||
|
||||
###How to Customize Keymap
|
||||
Later...
|
||||
See **keymap.c**.
|
||||
|
||||
|
||||
##Hardware
|
||||
|
||||
###Teensy++ installation
|
||||
Angled USB mini B adapter is used to install Teensy++ laterally.
|
||||
![doc/HHKB_img/teensy_install.jpg]
|
||||
|
||||
Bread baord wires are used to connect Teensy++.
|
||||
![doc/HHKB_img/teensy_wiring.jpg]
|
||||
![doc/HHKB_img/connector_contact.jpg]
|
||||
|
||||
|
||||
###PJRC Teensy++ 2.0 connection
|
||||
+---------------+
|
||||
| Teensy++ |
|
||||
| |
|
||||
| | HHKB
|
||||
| | ~~~~
|
||||
| PB0-2|------->ROW(6-8)
|
||||
| PB3-5|------->COL(9-11)
|
||||
| PB6|------->ENABLE(12)
|
||||
| PE6|<-------KEY(4)
|
||||
| PE7|------->PREV(5)
|
||||
| |
|
||||
| |
|
||||
| |
|
||||
+---------------+
|
||||
|
||||
|
||||
###V-USB circuit
|
||||
+---+ +---------------+
|
||||
USB GND | | ATmega168 |
|
||||
~~~ C3 | |
|
||||
5V <-------+--------+---|Vcc,AVCC | HHKB
|
||||
R1 | | ~~~~
|
||||
D- <----+--+-----R2-----|INT1 PB2-4|------->ROW(6-8)
|
||||
D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
|
||||
Z1 Z2 | PC3|------->ENABLE(12)
|
||||
GND<----+---+-----------|GND PB0|<-------KEY(4)
|
||||
| PB1|------->PREV(5)
|
||||
| |
|
||||
GND+-C2--+--|XTAL1 RXD|------->Debug Console
|
||||
X1 | TXD|<-------Debug Console
|
||||
GND+-C3--+--|XTAL2 RST|---SW--+GND
|
||||
+---------------+
|
||||
R1: 1.5K Ohm
|
||||
R2,R3: 68 Ohm
|
||||
Z1,Z2: Zener 3.6V
|
||||
C1,C2: 22pF
|
||||
C3: 0.1uF
|
||||
X1: Crystal 20MHz(16MHz/12MHz)
|
||||
SW: Push Switch(Optional for bootloader)
|
||||
@ -0,0 +1,32 @@
|
||||
|
||||
iWRAP
|
||||
-----
|
||||
+---------------+ WT12
|
||||
5V | ATmega168 | 5V/3.3V~~~~
|
||||
+-----+---|Vcc,AVCC PC4|---/--->iWRAP(RxD)
|
||||
USB | C3 | PC5|<--/----iWRAP(TxD)
|
||||
~~~ | + | |
|
||||
5V <--BATT + GND | | HHKB
|
||||
R1 | | ~~~~
|
||||
D- <----+-----+--R2-----|INT1 PB2-4|------->ROW(6-8)
|
||||
D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
|
||||
Z1 Z2 | PC3|------->ENABLE(12)
|
||||
GND<----+---+-----------|GND PB0|<-------KEY(4)
|
||||
| PB1|------->PREV(5)
|
||||
| |
|
||||
GND+-C2--+--|XTAL1 RXD|------->Debug Console
|
||||
X1 | TXD|<-------Debug Console
|
||||
GND+-C3--+--|XTAL2 RST|---SW--+GND
|
||||
+---------------+
|
||||
|
||||
R1: 1.5K Ohm
|
||||
R2,R3: 68 Ohm
|
||||
Z1,Z2: Zener 3.6V
|
||||
C1,C2: 22pF
|
||||
C3: 0.1uF
|
||||
X1: Crystal 12MHz
|
||||
SW: Push Switch(Optional)
|
||||
BATT: Li-Po Battery, Battery Charger and Voltage Regulator(5V and 3.3V).
|
||||
|
||||
|
||||
|
||||
Loading…
Reference in new issue